osd-contiki/cpu/avr/dev/arduino/SPI.cpp

202 lines
5.6 KiB
C++
Raw Normal View History

2016-10-02 18:53:44 +02:00
/*
* Copyright (c) 2010 by Cristian Maglie <c.maglie@arduino.cc>
* Copyright (c) 2014 by Paul Stoffregen <paul@pjrc.com> (Transaction API)
* Copyright (c) 2014 by Matthijs Kooijman <matthijs@stdin.nl> (SPISettings AVR)
* Copyright (c) 2014 by Andrew J. Kroll <xxxajk@gmail.com> (atomicity fixes)
* SPI Master library for arduino.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of either the GNU General Public License version 2
* or the GNU Lesser General Public License version 2.1, both as
* published by the Free Software Foundation.
*/
#include "SPI.h"
SPIClass SPI;
uint8_t SPIClass::initialized = 0;
uint8_t SPIClass::interruptMode = 0;
uint8_t SPIClass::interruptMask = 0;
uint8_t SPIClass::interruptSave = 0;
#ifdef SPI_TRANSACTION_MISMATCH_LED
uint8_t SPIClass::inTransactionFlag = 0;
#endif
void SPIClass::begin()
{
uint8_t sreg = SREG;
noInterrupts(); // Protect from a scheduler and prevent transactionBegin
if (!initialized) {
// Set SS to high so a connected chip will be "deselected" by default
uint8_t port = digitalPinToPort(SS);
uint8_t bit = digitalPinToBitMask(SS);
volatile uint8_t *reg = portModeRegister(port);
// if the SS pin is not already configured as an output
// then set it high (to enable the internal pull-up resistor)
if(!(*reg & bit)){
digitalWrite(SS, HIGH);
}
// When the SS pin is set as OUTPUT, it can be used as
// a general purpose output port (it doesn't influence
// SPI operations).
pinMode(SS, OUTPUT);
// Warning: if the SS pin ever becomes a LOW INPUT then SPI
// automatically switches to Slave, so the data direction of
// the SS pin MUST be kept as OUTPUT.
SPCR |= _BV(MSTR);
SPCR |= _BV(SPE);
// Set direction register for SCK and MOSI pin.
// MISO pin automatically overrides to INPUT.
// By doing this AFTER enabling SPI, we avoid accidentally
// clocking in a single bit since the lines go directly
// from "input" to SPI control.
// http://code.google.com/p/arduino/issues/detail?id=888
pinMode(SCK, OUTPUT);
pinMode(MOSI, OUTPUT);
}
initialized++; // reference count
SREG = sreg;
}
void SPIClass::end() {
uint8_t sreg = SREG;
noInterrupts(); // Protect from a scheduler and prevent transactionBegin
// Decrease the reference counter
if (initialized)
initialized--;
// If there are no more references disable SPI
if (!initialized) {
SPCR &= ~_BV(SPE);
interruptMode = 0;
#ifdef SPI_TRANSACTION_MISMATCH_LED
inTransactionFlag = 0;
#endif
}
SREG = sreg;
}
// mapping of interrupt numbers to bits within SPI_AVR_EIMSK
#if defined(__AVR_ATmega32U4__)
#define SPI_INT0_MASK (1<<INT0)
#define SPI_INT1_MASK (1<<INT1)
#define SPI_INT2_MASK (1<<INT2)
#define SPI_INT3_MASK (1<<INT3)
#define SPI_INT4_MASK (1<<INT6)
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
#define SPI_INT0_MASK (1<<INT0)
#define SPI_INT1_MASK (1<<INT1)
#define SPI_INT2_MASK (1<<INT2)
#define SPI_INT3_MASK (1<<INT3)
#define SPI_INT4_MASK (1<<INT4)
#define SPI_INT5_MASK (1<<INT5)
#define SPI_INT6_MASK (1<<INT6)
#define SPI_INT7_MASK (1<<INT7)
#elif defined(EICRA) && defined(EICRB) && defined(EIMSK)
#define SPI_INT0_MASK (1<<INT4)
#define SPI_INT1_MASK (1<<INT5)
#define SPI_INT2_MASK (1<<INT0)
#define SPI_INT3_MASK (1<<INT1)
#define SPI_INT4_MASK (1<<INT2)
#define SPI_INT5_MASK (1<<INT3)
#define SPI_INT6_MASK (1<<INT6)
#define SPI_INT7_MASK (1<<INT7)
#else
#ifdef INT0
#define SPI_INT0_MASK (1<<INT0)
#endif
#ifdef INT1
#define SPI_INT1_MASK (1<<INT1)
#endif
#ifdef INT2
#define SPI_INT2_MASK (1<<INT2)
#endif
#endif
void SPIClass::usingInterrupt(uint8_t interruptNumber)
{
uint8_t mask = 0;
uint8_t sreg = SREG;
noInterrupts(); // Protect from a scheduler and prevent transactionBegin
switch (interruptNumber) {
#ifdef SPI_INT0_MASK
case 0: mask = SPI_INT0_MASK; break;
#endif
#ifdef SPI_INT1_MASK
case 1: mask = SPI_INT1_MASK; break;
#endif
#ifdef SPI_INT2_MASK
case 2: mask = SPI_INT2_MASK; break;
#endif
#ifdef SPI_INT3_MASK
case 3: mask = SPI_INT3_MASK; break;
#endif
#ifdef SPI_INT4_MASK
case 4: mask = SPI_INT4_MASK; break;
#endif
#ifdef SPI_INT5_MASK
case 5: mask = SPI_INT5_MASK; break;
#endif
#ifdef SPI_INT6_MASK
case 6: mask = SPI_INT6_MASK; break;
#endif
#ifdef SPI_INT7_MASK
case 7: mask = SPI_INT7_MASK; break;
#endif
default:
interruptMode = 2;
break;
}
interruptMask |= mask;
if (!interruptMode)
interruptMode = 1;
SREG = sreg;
}
void SPIClass::notUsingInterrupt(uint8_t interruptNumber)
{
// Once in mode 2 we can't go back to 0 without a proper reference count
if (interruptMode == 2)
return;
uint8_t mask = 0;
uint8_t sreg = SREG;
noInterrupts(); // Protect from a scheduler and prevent transactionBegin
switch (interruptNumber) {
#ifdef SPI_INT0_MASK
case 0: mask = SPI_INT0_MASK; break;
#endif
#ifdef SPI_INT1_MASK
case 1: mask = SPI_INT1_MASK; break;
#endif
#ifdef SPI_INT2_MASK
case 2: mask = SPI_INT2_MASK; break;
#endif
#ifdef SPI_INT3_MASK
case 3: mask = SPI_INT3_MASK; break;
#endif
#ifdef SPI_INT4_MASK
case 4: mask = SPI_INT4_MASK; break;
#endif
#ifdef SPI_INT5_MASK
case 5: mask = SPI_INT5_MASK; break;
#endif
#ifdef SPI_INT6_MASK
case 6: mask = SPI_INT6_MASK; break;
#endif
#ifdef SPI_INT7_MASK
case 7: mask = SPI_INT7_MASK; break;
#endif
default:
break;
// this case can't be reached
}
interruptMask &= ~mask;
if (!interruptMask)
interruptMode = 0;
SREG = sreg;
}