deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
osd-contiki/core/net/netstack.h

127 lines
4.2 KiB
C
Raw Normal View History

A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
/*
* Copyright (c) 2010, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
Moved the definition of the channel check rate used by the radio duty cycling layer. This definition was previously held in net/mac/mac.h, with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used by the radio duty cycling layer, it makes more sense to change its name to reflect this. Also, the configuration option should be tied to the netstack configuration instead. So the new configuration option is called NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
2010-10-03 22:37:32 +02:00
* $Id: netstack.h,v 1.6 2010/10/03 20:37:32 adamdunkels Exp $
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
*/
/**
* \file
* Include file for the Contiki low-layer network stack (NETSTACK)
* \author
* Adam Dunkels <adam@sics.se>
*/
#ifndef NETSTACK_H
#define NETSTACK_H
#include "contiki-conf.h"
#ifndef NETSTACK_NETWORK
#ifdef NETSTACK_CONF_NETWORK
#define NETSTACK_NETWORK NETSTACK_CONF_NETWORK
#else /* NETSTACK_CONF_NETWORK */
#define NETSTACK_NETWORK rime_driver
#endif /* NETSTACK_CONF_NETWORK */
#endif /* NETSTACK_NETWORK */
#ifndef NETSTACK_MAC
#ifdef NETSTACK_CONF_MAC
#define NETSTACK_MAC NETSTACK_CONF_MAC
#else /* NETSTACK_CONF_MAC */
Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration.
2010-02-23 21:09:11 +01:00
#define NETSTACK_MAC nullmac_driver
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
#endif /* NETSTACK_CONF_MAC */
#endif /* NETSTACK_MAC */
#ifndef NETSTACK_RDC
#ifdef NETSTACK_CONF_RDC
#define NETSTACK_RDC NETSTACK_CONF_RDC
#else /* NETSTACK_CONF_RDC */
Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration.
2010-02-23 21:09:11 +01:00
#define NETSTACK_RDC nullrdc_driver
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
#endif /* NETSTACK_CONF_RDC */
#endif /* NETSTACK_RDC */
Moved the definition of the channel check rate used by the radio duty cycling layer. This definition was previously held in net/mac/mac.h, with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used by the radio duty cycling layer, it makes more sense to change its name to reflect this. Also, the configuration option should be tied to the netstack configuration instead. So the new configuration option is called NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
2010-10-03 22:37:32 +02:00
#ifndef NETSTACK_RDC_CHANNEL_CHECK_RATE
#ifdef NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE
#define NETSTACK_RDC_CHANNEL_CHECK_RATE NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE
#else /* NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE */
Set default RDC wakeup rate to 8 hz
2011-09-05 20:42:38 +02:00
#define NETSTACK_RDC_CHANNEL_CHECK_RATE 8
Moved the definition of the channel check rate used by the radio duty cycling layer. This definition was previously held in net/mac/mac.h, with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used by the radio duty cycling layer, it makes more sense to change its name to reflect this. Also, the configuration option should be tied to the netstack configuration instead. So the new configuration option is called NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
2010-10-03 22:37:32 +02:00
#endif /* NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE */
#endif /* NETSTACK_RDC_CHANNEL_CHECK_RATE */
#if (NETSTACK_RDC_CHANNEL_CHECK_RATE & (NETSTACK_RDC_CHANNEL_CHECK_RATE - 1)) != 0
#error NETSTACK_RDC_CONF_CHANNEL_CHECK_RATE must be a power of two (i.e., 1, 2, 4, 8, 16, 32, 64, ...).
#error Change NETSTACK_RDC_CONF_CHANNEL_CHECK_RATE in contiki-conf.h, project-conf.h or in your Makefile.
#endif
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
#ifndef NETSTACK_RADIO
#ifdef NETSTACK_CONF_RADIO
#define NETSTACK_RADIO NETSTACK_CONF_RADIO
#else /* NETSTACK_CONF_RADIO */
Set the default radio driver to nullradio
2010-02-23 19:28:04 +01:00
#define NETSTACK_RADIO nullradio_driver
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
#endif /* NETSTACK_CONF_RADIO */
#endif /* NETSTACK_RADIO */
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 14:30:21 +01:00
#ifndef NETSTACK_FRAMER
#ifdef NETSTACK_CONF_FRAMER
#define NETSTACK_FRAMER NETSTACK_CONF_FRAMER
#else /* NETSTACK_CONF_FRAMER */
#define NETSTACK_FRAMER framer_nullmac
#endif /* NETSTACK_CONF_FRAMER */
#endif /* NETSTACK_FRAMER */
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
#include "net/mac/mac.h"
Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration.
2010-02-23 21:09:11 +01:00
#include "net/mac/rdc.h"
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 14:30:21 +01:00
#include "net/mac/framer.h"
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
#include "dev/radio.h"
Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration.
2010-02-23 21:09:11 +01:00
/**
* The structure of a network driver in Contiki.
*/
struct network_driver {
char *name;
/** Initialize the network driver */
void (* init)(void);
/** Callback for getting notified of incoming packet. */
void (* input)(void);
};
extern const struct network_driver NETSTACK_NETWORK;
extern const struct rdc_driver NETSTACK_RDC;
extern const struct mac_driver NETSTACK_MAC;
extern const struct radio_driver NETSTACK_RADIO;
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 14:30:21 +01:00
extern const struct framer NETSTACK_FRAMER;
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
Common initialization code for the netstack
2010-02-19 00:15:26 +01:00
void netstack_init(void);
A work-in-progress rework of the Contiki MAC and radio layers. The main ideas are: * Separates the Contiki low-layer network stack into four layers: network (e.g. sicslowpan / rime), Medium Access Control MAC (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and radio (e.g. cc2420). * Introduces a new way to configure the network stack. Four #defines that specify what mechanism/protocol/driver to use at the four layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC, NETSTACK_CONF_RADIO. * Adds a callback mechanism to inform the MAC and network layers about the fate of a transmitted packet: if the packet was not possible to transmit, the cause of the failure is reported, and if the packets was successfully transmitted, the number of tries before it was finally transmitted is reported. * NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc, which can be used when MAC and RDC functionality is not needed. * Extends the radio API with three new functions that enable more efficient radio duty cycling protocols: channel check, pending packet, and receiving packet. * New initialization mechanism, which takes advantage of the NETSTACK #defines.
2010-02-18 22:48:39 +01:00
#endif /* NETSTACK_H */
Reference in a new issue Copy permalink