osd-contiki/tools/z80/hex2bin/README.txt

164 lines
5.2 KiB
Plaintext
Raw Normal View History

hexameter : Convert Intel hex files to a binary file
version 2.1.0
Copyright (c) 2003-2008, Takahide Matsutsuka.
1/ What is it?
It converts Intel hex files, which emitted by SDCC-Z80 compiler, to
a binary file. You can attach additional prefix and/or suffix file
to comply the file with arbitrary binary format.
It provides a development environment of C language on PC-6001 and
other old computers.
2/ Installation
Installation can be done in the following steps.
a) Download and install SDCC from http://sdcc.sf.net/
Version 2.8.0 has been tested.
SDCC is a cross-compiler for Z80 and other 8bit CPUs.
Extract an archive on your disk, say "c:/sdcc".
b) Place hexameter.exe and prefix/suffix files to any path-available
directory.
3/ Use
a) Write your own C code.
b) Compile your code using SDCC.
While linking, you need to specify options for SDCC so that the
code can be worked on your machine.
See sample/Makefile for actual usage.
% sdcc -mz80 -c YOUR_CODE1.c
% sdcc -mz80 -c YOUR_CODE2.c
This step creates a file YOUR_CODE1.o and YOUR_CODE2.o respectively,
which run on Z80-based machine.
% for target in YOUR_CODE1.o YOUR_CODE2.o; do echo $@ >> YOUR_LIB.lib $@; done
This step makes a library file.
sdcc -mz80 --no-std-crt0 --code-loc 0x840f --data-loc 0 -o YOUR_APP.ihx crt0.o -lYOUR_LIB.lib
-mz80 specifies the Z80 mode.
--code-loc specifies the start address of your object code.
Basically, it depends on the machine and RAM size. As for PC-6001,
0x840f for 32kB, or 0xc40f for 16kB. As for PC-6001mkII, it would
be 0x800f.
If you are not sure what you are about to do, just leave it as
default 0x840f.
--data-loc 0 specifies the code is followed by data.
You can specify an arbitrary address instead.
--no-std-crt0 indicates that you use your own crt0 instead of sdcc's
default crt0 object. The customized crt0.o file is in lib directory
of this release.
c) Convert ihx file to cas file using hexameter
hexameter <ihx_file|binary_file> [ihx_file|binary_file ...]
The ihx files are just attached in the specified order.
Here you can take some options:
-o <filename> specify output file name
-d <name>=<value> define ihx-specific value replacement
-v verbose output
-b <size> size of the output file in hexadecimal bytes.
only if the size of the output is less than the size
specified, the trailing bytes will filled by zeroes.
note that it doesn't mean the size of output is
restricted by the given size.
-h displays simple usage
You can find various predefined library file in "lib" directory.
Each of them may take its own optional value, which you can specify
with -d option.
d) Example
The following is a typical example to convert from ihx files to
PC-6001 loadable cassette format.
% hexameter -v TAPE=myfile mode2.ihx mycode2.ihx -o myapp.p6
Note that TAPE value is defined in mode2.ihx, defines cassette file name.
e) Load your cas file into your 6001 emulator.
I've checked it working on the following emulators:
VirtualTrek
http://www.geocities.com/emucompboy/
iP6Win
http://www.retropc.net/mm/pc6001/
PC-6001VW
http://bernie.hp.infoseek.co.jp/develop/pc6001vw.html
4/ IHX extentions
To support run-time user specified values in ihx files, Hexameter supports
extended ihx files. Examples are located in ihx directory.
For example, mode2.ihx has the following line.
:06000a02TAPE
As in normal ihx format, the first 9 characters conform to the following
format:
:AABBBBCC
AA bytes encoded in this line
BBBB start address of this line
CC type of this line
The normal ihx file, which sdcc emits, has the type 00 (data) and 01 (end of
file). In addition to this, Hexameter supports the following types.
02 string
03 byte
04 word (encoded in little endian)
The rest of line defines a name of the definition. In the example above,
the name TAPE is assigned to this line. You can use latin alphabets,
numbers, and underscore (_) for the name. Letters are case-sensitive.
When you run Hexameter, you can specify a value for this definition like:
hexameter -d TAPE=xxxx
Since this example defines 06 in the bytes field, TAPE can have up to
six characters. This string will override the memory location 000a
specified in the second field.
For type 03 (byte) and 04 (word), bytes field has no effect.
5/ Note
- Cygwin dependency has been removed.
- SDCC has many isuues regarding compilation. Don't blame me about them! :)
6/ History
03/29/2003 1.0.0 First version
04/20/2003 1.0.1 Mode option has been added
09/01/2007 1.1.0 ROM-mode has been added
09/28/2007 1.2.0 Customized crt0 has been introduced to clear global data
03/15/2008 1.3.0 VRAM options introduced
04/28/2008 1.4.0 Header file option introduced
05/17/2008 2.0.0 Migrated to hexameter, to support more flexible configurations
07/16/2008 2.1.0 Support arguments in ihx file, remove prefix/suffix instead
07/18/2008 2.1.1 Cygwin dependency has been removed
10/02/2008 2.1.2 Template for sdos 1.1 has been added
12/14/2009 2.1.3 A minor bug in Linux environment has been fixed
Enjoy!
http://www.markn.org/
markn@markn.org