osd-contiki/doc/radioinit

Entries in ram are processed by SMACinitfrommemory and executeentry
(which does the work). I suspect that these entries are loaded in from
the rom from the rom_data_init call in the beginning stub. For now
we'll do the simple thing of performing the actions they do, but for
real it would be better to load out from ROM and execute the entries
in a similar way. That way, if the cal data changes in the ROM, our
code should still work.

When radioinit first starts it seems to do checks for a 24MHZ clock
and if the buck should be enabled. Assuming 24MHZ and no buck the next
things it does is 5 entries in cal1 (40 bytes, 4 bytes per word, = 10
words, 2 words per entry = 5 entrys)

0x80003048      
0x00000f78      

0x8000304c      
0x00607707

the next entry is zero addr with val 0x000161a8... this is a delay
entry. Loop here 0x000161a8 times. then return.

0x00000000      
0x000161a8

Then two more memory stuffs:

0x8000a050      
0x0000047b

0x8000a054      
0x0000007b 

then it seems like the emulator dies on the stack munging they do at
the end of InitFromMemory... but I think I've decoded the entry
enough to figure out the rest.

then they do one entry of r4 base + 48 (gRadioTOCCal2_24MHz_c[0])

0x80009000      
0x80050100

then they do 11 entries in cal3  and reg replacment  (first two have delays)

0x402b8c <gRadioTOCCal3_c>:     0x80009400      0x00020017      0x80009a04      0x8185a0a4
0x402b9c <gRadioTOCCal3_c+16>:  0x80009a00      0x8c900025      0x00000000      0x00011194
0x402bac <gRadioTOCCal3_c+32>:  0x80009a00      0x8c900021      0x80009a00      0x8c900027
0x402bbc <gRadioTOCCal3_c+48>:  0x00000000      0x00011194      0x80009a00      0x8c90002b
0x402bcc <gRadioTOCCal3_c+64>:  0x80009a00      0x8c90002f      0x00000000      0x00011194
0x402bdc <gRadioTOCCal3_c+80>:  0x80009a00      0x8c900000      

then 4 entries from r5+24 (buffer_radio_init and cal5)

0x80009400      0x00000017
0x405230 <gRadioTOCCal5+8>:     0x8000a050      0x00000000      0x8000a054      0x00000000
0x405240 <gRadioTOCCal5+24>:    0x80003048      0x00000f00

then 43 entries from r4+152 (reg replacement)

0x402bec <gRadioInit_RegReplacement_c>:         0x80004118      0x00180012      0x80009204      0x00000605
0x402bfc <gRadioInit_RegReplacement_c+16>:      0x80009208      0x00000504      0x8000920c      0x00001111
0x402c0c <gRadioInit_RegReplacement_c+32>:      0x80009210      0x0fc40000      0x80009300      0x20046000
0x402c1c <gRadioInit_RegReplacement_c+48>:      0x80009304      0x4005580c      0x80009308      0x40075801
0x402c2c <gRadioInit_RegReplacement_c+64>:      0x8000930c      0x4005d801      0x80009310      0x5a45d800
0x402c3c <gRadioInit_RegReplacement_c+80>:      0x80009314      0x4a45d800      0x80009318      0x40044000
0x402c4c <gRadioInit_RegReplacement_c+96>:      0x80009380      0x00106000      0x80009384      0x00083806
0x402c5c <gRadioInit_RegReplacement_c+112>:     0x80009388      0x00093807      0x8000938c      0x0009b804
0x402c6c <gRadioInit_RegReplacement_c+128>:     0x80009390      0x000db800      0x80009394      0x00093802
0x402c7c <gRadioInit_RegReplacement_c+144>:     0x8000a008      0x00000015      0x8000a018      0x00000002
0x402c8c <gRadioInit_RegReplacement_c+160>:     0x8000a01c      0x0000000f      0x80009424      0x0000aaa0
0x402c9c <gRadioInit_RegReplacement_c+176>:     0x80009434      0x01002020      0x80009438      0x016800fe
0x402cac <gRadioInit_RegReplacement_c+192>:     0x8000943c      0x8e578248      0x80009440      0x000000dd
0x402cbc <gRadioInit_RegReplacement_c+208>:     0x80009444      0x00000946      0x80009448      0x0000035a
0x402ccc <gRadioInit_RegReplacement_c+224>:     0x8000944c      0x00100010      0x80009450      0x00000515
0x402cdc <gRadioInit_RegReplacement_c+240>:     0x80009460      0x00397feb      0x80009464      0x00180358
0x402cec <gRadioInit_RegReplacement_c+256>:     0x8000947c      0x00000455      0x800094e0      0x00000001
0x402cfc <gRadioInit_RegReplacement_c+272>:     0x800094e4      0x00020003      0x800094e8      0x00040014
0x402d0c <gRadioInit_RegReplacement_c+288>:     0x800094ec      0x00240034      0x800094f0      0x00440144
0x402d1c <gRadioInit_RegReplacement_c+304>:     0x800094f4      0x02440344      0x800094f8      0x04440544
0x402d2c <gRadioInit_RegReplacement_c+320>:     0x80009470      0x0ee7fc00      0x8000981c      0x00000082
0x402d3c <gRadioInit_RegReplacement_c+336>:     0x80009828      0x0000002a

then flash init. (hrmm.. this might be important)

then flyback init.

then maybe buckbypass sequence... 4 entries from r4+16

0x402b64 <gBuckByPass_c>:       0x80003000      0x00000018      0x80003048      0x00000f04
0x402b74 <gBuckByPass_c+16>:    0x00000000      0x000161a8      0x80003048      0x00000ffc

RadioInit is (roughly):

    SMAC_InitFromMemory(gRadioTOCCal1,40);
    SMAC_InitFromMemory(gRadioTOCCal2_24MHz_c,8);
    SMAC_InitFromMemory(gRadioTOCCal3_c,88);
    SMAC_InitFromMemory(gRadioTOCCal5,32);
    SMAC_InitFromMemory(gRadioInit_RegReplacement_c,344);
    SMAC_InitFromFlash(0x1F000);
    SMAC_InitFlybackSettings();
    SMAC_InitFromMemory(gBuckByPass_c,16);

    fill_ram_struct(&u8RamValues);

    uint8_t i;
    uint8_t buffer_radio_init[16];
    for(i=0; i<16; i++) {
    	     buffer_radio_init[i] = get_ctov(i,u8RamValues[3]);
    }


Some kind of success!

This replacment works:


 //   RadioInit(PLATFORM_CLOCK, gDigitalClock_PN_c, u32LoopDiv);   // need this to work
 
    /* my replacment for RadioInit, flyback and vreg have been separated out */
      radio_init();  
      //    SMAC_InitFromMemory(gRadioTOCCal1,40);
      //     *(volatile uint32_t *)0x80009000 = 0x80050100;
      //    SMAC_InitFromMemory(gRadioTOCCal2_24MHz_c,8);
      //    SMAC_InitFromMemory(gRadioTOCCal3_c,88);
      //    SMAC_InitFromMemory(gRadioTOCCal5,32);
      //    SMAC_InitFromMemory(gRadioInit_RegReplacement_c,344);
      SMAC_InitFromFlash(0x1F000);
      // SMAC_InitFlybackSettings();
      flyback_init();
      //  SMAC_InitFromMemory(gBuckByPass_c,16);
      vreg_init();
      
      *((uint32_t *)&u8RamValues) = 0x4c20030a;   
      fill_ram_struct(&u8RamValues);
    
      for(j=0; j<16; j++) {
         //        buffer_radio_init[j] = get_ctov(j,u8RamValues[3]);
                   buffer_radio_init[j] = get_ctov(j,0x4c); //0x4c loads the right values into buffer_radio_init... but why isn't RamValues correct?
      }


Which means my radio_init, and vreg_init are good. It also means that
my intreprtation of buffer_radio_init is correct. It may also mean
that u8RamValues isn't important since I just set it's value.

That means I only have InitFromFlash to replace now!


/*
After init from flash and flyback settings
ram_init_val - 004055d0
004055d0
base +0       +4       +8       +c       +10      +14      +18      +1c      
0000 00000000 00000000 00000000 00000000 00000000 00000000 80009400 00000017

u8RamValues
00405424
base +0       +4       +8       +c       +10      +14      +18      +1c      
0000 0400009b 00000000 00000000 00010000 ff000000 00000000 00000000 00000000
*/

/*
  40308e:       f000 f86d       bl      40316c <get_ctov>                                 //get_ctov(0,0x9b)
  403092:       1929            adds    r1, r5, r4       // r4 = 0, r5 is &ram_init_val
  403094:       7208            strb    r0, [r1, #8]
  403096:       1c64            adds    r4, r4, #1       // r4=1
  403098:       0620            lsls    r0, r4, #24     
  40309a:       0e00            lsrs    r0, r0, #24
  40309c:       2810            cmp     r0, #16          //
  40309e:       d3f3            bcc.n   403088 <RadioInit+0xcc> // branch if higher
  4030a0:       b001            add     sp, #4
  4030a2:       9804            ldr     r0, [sp, #16]
  4030a4:       bcf0            pop     {r4, r5, r6, r7}
  4030a6:       b001            add     sp, #4
  4030a8:       4700            bx      r0
  4030aa:       46c0            nop                     (mov r8, r8)


*/