osd-contiki/cpu/cc2538/dev/ecc-driver.h

228 lines
9.1 KiB
C
Raw Normal View History

/*
* Original file:
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Port to Contiki:
* Copyright (c) 2014 Andreas Dröscher <contiki@anticat.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538-pka
* @{
*
* \defgroup cc2538-ecc cc2538 ECC driver
*
* Driver for the cc2538 ECC mode of the PKC engine
* @{
*
* \file
* Header file for the cc2538 ECC driver
*/
#ifndef ECC_DRIVER_H_
#define ECC_DRIVER_H_
#include "contiki.h"
#include "dev/pka.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
/** \name ECC structures
* @{
*/
typedef struct {
const char *name; /**< Name of the curve. */
const uint8_t size; /**< Size of the curve in 32-bit word. */
const uint32_t *prime; /**< The prime that defines the field of the curve. */
const uint32_t *n; /**< Order of the curve. */
const uint32_t *a; /**< Co-efficient a of the equation. */
const uint32_t *b; /**< co-efficient b of the equation. */
const uint32_t *x; /**< x co-ordinate value of the generator point. */
const uint32_t *y; /**< y co-ordinate value of the generator point. */
} ecc_curve_info_t;
typedef struct {
uint32_t x[12]; /**< Pointer to value of the x co-ordinate. */
uint32_t y[12]; /**< Pointer to value of the y co-ordinate. */
} ec_point_t;
/** @} */
/*---------------------------------------------------------------------------*/
/** \name ECC functions
* \note Not all sequencer functions are implemented in this driver
* look at the CC2538 manual for a complete list.
* @{
*/
/** \brief Starts ECC Multiplication.
*
* \param scalar Pointer to the buffer containing the scalar
* value to be multiplied.
* \param ec_point Pointer to the structure containing the
* elliptic curve point to be multiplied. The point should be
* on the given curve.
* \param curve Pointer to the structure containing the curve
* info.
* \param result_vector Pointer to the result vector location
* which will be set by this function.
* \param process Process to be polled upon completion of the
* operation, or \c NULL
*
* This function starts the Elliptical curve cryptography (ECC) point
* multiplication operation on the EC point and the scalar value.
*
* \retval PKA_STATUS_SUCCESS if successful in starting the operation.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy doing
* some other operation.
*/
uint8_t ecc_mul_start(uint32_t *scalar,
ec_point_t *ec_point,
ecc_curve_info_t *curve,
uint32_t *result_vector,
struct process *process);
/** \brief Gets the result of ECC Multiplication
*
* \param ec_point Pointer to the structure where the resultant EC
* point will be stored. The callee is responsible to allocate the
* space for the ec point structure and the x and y co-ordinate as well.
* \param result_vector Address of the result location which
* was provided by the start function \sa PKAECCMultiplyStart().
*
* This function gets the result of ecc point multiplication operation on the
* ec point and the scalar value, previously started using the function
* \sa PKAECCMultiplyStart().
*
* \retval PKA_STATUS_SUCCESS if the operation is successful.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy performing
* the operation.
* \retval PKA_STATUS_RESULT_0 if the result is all zeroes.
* \retval PKA_STATUS_FAILURE if the operation is not successful.
*/
uint8_t ecc_mul_get_result(ec_point_t *ec_point,
uint32_t result_vector);
/** \brief Starts the ECC Multiplication with Generator point.
*
* \param scalar Pointer to the buffer containing the
* scalar value.
* \param curve Pointer to the structure containing the curve
* info.
* \param result_vector Pointer to the result vector location
* which will be set by this function.
* \param process Process to be polled upon completion of the
* operation, or \c NULL
*
* This function starts the ecc point multiplication operation of the
* scalar value with the well known generator point of the given curve.
*
* \retval PKA_STATUS_SUCCESS if successful in starting the operation.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy doing
* some other operation.
*/
uint8_t ecc_mul_gen_pt_start(uint32_t *scalar,
ecc_curve_info_t *curve,
uint32_t *result_vector,
struct process *process);
/** \brief Gets the result of ECC Multiplication with Generator point.
*
* \param ec_point Pointer to the structure where the resultant EC
* point will be stored. The callee is responsible to allocate the
* space for the ec point structure and the x and y co-ordinate as well.
* \param result_vector Address of the result location which
* was provided by the start function \sa PKAECCMultGenPtStart().
*
* This function gets the result of ecc point multiplication operation on the
* scalar point and the known generator point on the curve, previously started
* using the function \sa PKAECCMultGenPtStart().
*
* \retval PKA_STATUS_SUCCESS if the operation is successful.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy performing
* the operation.
* \retval PKA_STATUS_RESULT_0 if the result is all zeroes.
* \retval PKA_STATUS_FAILURE if the operation is not successful.
*/
uint8_t ecc_mul_gen_pt_get_result(ec_point_t *ec_point,
uint32_t result_vector);
/** \brief Starts the ECC Addition.
*
* \param ec_point1 Pointer to the structure containing the first
* ecc point.
* \param ec_point2 Pointer to the structure containing the
* second ecc point.
* \param curve Pointer to the structure containing the curve
* info.
* \param result_vector Pointer to the result vector location
* which will be set by this function.
* \param process Process to be polled upon completion of the
* operation, or \c NULL
*
* This function starts the ecc point addition operation on the
* two given ec points and generates the resultant ecc point.
*
* \retval PKA_STATUS_SUCCESS if successful in starting the operation.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy doing
* some other operation.
*/
uint8_t ecc_add_start(ec_point_t *ec_point1, ec_point_t *ec_point2,
ecc_curve_info_t *curve,
uint32_t *result_vector,
struct process *process);
/** \brief Gets the result of the ECC Addition
*
* \param ptOutEcPt Pointer to the structure where the resultant
* point will be stored. The callee is responsible to allocate memory,
* for the ec point structure including the memory for x and y
* co-ordinate values.
* \param ui32ResultLoc Address of the result location which
* was provided by the function \sa PKAECCAddStart().
*
* This function gets the result of ecc point addition operation on the
* on the two given ec points, previously started using the function \sa
* PKAECCAddStart().
*
* \retval PKA_STATUS_SUCCESS if the operation is successful.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy performing
* the operation.
* \retval PKA_STATUS_RESULT_0 if the result is all zeroes.
* \retval PKA_STATUS_FAILURE if the operation is not successful.
*/
uint8_t ecc_add_get_result(ec_point_t *ptOutEcPt, uint32_t ui32ResultLoc);
/** @} */
#endif /* ECC_DRIVER_H_ */
/**
* @}
* @}
*/