osd-contiki/cpu/cc26xx-cc13xx/lpm.c

533 lines
17 KiB
C
Raw Normal View History

2015-02-25 13:09:56 +01:00
/*
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup cc26xx-lpm
* @{
*
* Implementation of CC13xx/CC26xx low-power operation functionality
2015-02-25 13:09:56 +01:00
*
* @{
*
* \file
* Driver for CC13xx/CC26xx low-power operation
2015-02-25 13:09:56 +01:00
*/
/*---------------------------------------------------------------------------*/
#include "prcm.h"
#include "contiki-conf.h"
#include "ti-lib.h"
#include "lpm.h"
#include "sys/energest.h"
#include "lib/list.h"
#include "dev/aux-ctrl.h"
2015-02-25 13:09:56 +01:00
#include "dev/leds.h"
#include "dev/watchdog.h"
#include "dev/soc-rtc.h"
#include "dev/oscillators.h"
#include <stdint.h>
#include <string.h>
#include <stdbool.h>
2015-02-25 13:09:56 +01:00
/*---------------------------------------------------------------------------*/
#if ENERGEST_CONF_ON
static unsigned long irq_energest = 0;
#define ENERGEST_IRQ_SAVE(a) do { \
a = energest_type_time(ENERGEST_TYPE_IRQ); } while(0)
#define ENERGEST_IRQ_RESTORE(a) do { \
energest_type_set(ENERGEST_TYPE_IRQ, a); } while(0)
#else
#define ENERGEST_IRQ_SAVE(a) do {} while(0)
#define ENERGEST_IRQ_RESTORE(a) do {} while(0)
#endif
/*---------------------------------------------------------------------------*/
LIST(modules_list);
/*---------------------------------------------------------------------------*/
/* PDs that may stay on in deep sleep */
#define LOCKABLE_DOMAINS ((uint32_t)(PRCM_DOMAIN_SERIAL | PRCM_DOMAIN_PERIPH))
/*---------------------------------------------------------------------------*/
/*
* Don't consider standby mode if the next AON RTC event is scheduled to fire
* in less than STANDBY_MIN_DURATION rtimer ticks
*/
#define STANDBY_MIN_DURATION (RTIMER_SECOND >> 11)
#define MINIMAL_SAFE_SCHEDUAL 8u
#define MAX_SLEEP_TIME RTIMER_SECOND
#define DEFAULT_SLEEP_TIME RTIMER_SECOND
/*---------------------------------------------------------------------------*/
#define CLK_TO_RT(c) ((c) * (RTIMER_SECOND / CLOCK_SECOND))
/*---------------------------------------------------------------------------*/
/* Prototype of a function in clock.c. Called every time we come out of DS */
void clock_update(void);
2015-02-25 13:09:56 +01:00
/*---------------------------------------------------------------------------*/
void
lpm_shutdown(uint32_t wakeup_pin, uint32_t io_pull, uint32_t wake_on)
2015-02-25 13:09:56 +01:00
{
lpm_registered_module_t *module;
int i;
uint32_t io_cfg = (IOC_STD_INPUT & ~IOC_IOPULL_M) | io_pull | wake_on;
aux_consumer_module_t aux = { .clocks = AUX_WUC_OSCCTRL_CLOCK };
/* This procedure may not be interrupted */
ti_lib_int_master_disable();
/* Disable the RTC */
ti_lib_aon_rtc_disable();
ti_lib_aon_rtc_event_clear(AON_RTC_CH0);
ti_lib_aon_rtc_event_clear(AON_RTC_CH1);
ti_lib_aon_rtc_event_clear(AON_RTC_CH2);
/* Reset AON even fabric to default wakeup sources */
for(i = AON_EVENT_MCU_WU0; i <= AON_EVENT_MCU_WU3; i++) {
ti_lib_aon_event_mcu_wake_up_set(i, AON_EVENT_NONE);
}
for(i = AON_EVENT_AUX_WU0; i <= AON_EVENT_AUX_WU2; i++) {
ti_lib_aon_event_aux_wake_up_set(i, AON_EVENT_NONE);
2015-02-25 13:09:56 +01:00
}
ti_lib_sys_ctrl_aon_sync();
2015-02-25 13:09:56 +01:00
watchdog_periodic();
2015-02-25 13:09:56 +01:00
/* Notify all modules that we're shutting down */
2015-02-25 13:09:56 +01:00
for(module = list_head(modules_list); module != NULL;
module = module->next) {
if(module->shutdown) {
module->shutdown(LPM_MODE_SHUTDOWN);
}
}
/* Configure the wakeup trigger */
if(wakeup_pin != IOID_UNUSED) {
ti_lib_gpio_dir_mode_set((1 << wakeup_pin), GPIO_DIR_MODE_IN);
ti_lib_ioc_port_configure_set(wakeup_pin, IOC_PORT_GPIO, io_cfg);
}
2015-02-25 13:09:56 +01:00
/* Freeze I/O latches in AON */
ti_lib_aon_ioc_freeze_enable();
2015-02-25 13:09:56 +01:00
/* Turn off RFCORE, SERIAL and PERIPH PDs. This will happen immediately */
ti_lib_prcm_power_domain_off(PRCM_DOMAIN_RFCORE | PRCM_DOMAIN_SERIAL |
PRCM_DOMAIN_PERIPH);
/* Register an aux-ctrl consumer to avoid powercycling AUX twice in a row */
aux_ctrl_register_consumer(&aux);
oscillators_switch_to_hf_rc();
oscillators_select_lf_rcosc();
/* Configure clock sources for MCU: No clock */
ti_lib_aon_wuc_mcu_power_down_config(AONWUC_NO_CLOCK);
/* Disable SRAM retention */
ti_lib_aon_wuc_mcu_sram_config(0);
/*
* Request CPU, SYSBYS and VIMS PD off.
* This will only happen when the CM3 enters deep sleep
*/
ti_lib_prcm_power_domain_off(PRCM_DOMAIN_CPU | PRCM_DOMAIN_VIMS |
PRCM_DOMAIN_SYSBUS);
/* Request JTAG domain power off */
ti_lib_aon_wuc_jtag_power_off();
/* Turn off AUX */
aux_ctrl_power_down(true);
ti_lib_aon_wuc_domain_power_down_enable();
/*
* Request MCU VD power off.
* This will only happen when the CM3 enters deep sleep
*/
ti_lib_prcm_mcu_power_off();
/* Set MCU wakeup to immediate and disable virtual power off */
ti_lib_aon_wuc_mcu_wake_up_config(MCU_IMM_WAKE_UP);
ti_lib_aon_wuc_mcu_power_off_config(MCU_VIRT_PWOFF_DISABLE);
2015-02-25 13:09:56 +01:00
/* Latch the IOs in the padring and enable I/O pad sleep mode */
ti_lib_pwr_ctrl_io_freeze_enable();
2015-02-25 13:09:56 +01:00
/* Turn off VIMS cache, CRAM and TRAM - possibly not required */
ti_lib_prcm_cache_retention_disable();
ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_OFF);
/* Enable shutdown and sync AON */
ti_lib_aon_wuc_shut_down_enable();
ti_lib_sys_ctrl_aon_sync();
/* Deep Sleep */
ti_lib_prcm_deep_sleep();
2015-02-25 13:09:56 +01:00
}
/*---------------------------------------------------------------------------*/
/*
2015-05-01 17:09:50 +02:00
* Notify all modules that we're back on and rely on them to restore clocks
2015-02-25 13:09:56 +01:00
* and power domains as required.
*/
2015-05-01 17:09:50 +02:00
static void
wake_up(void)
2015-02-25 13:09:56 +01:00
{
lpm_registered_module_t *module;
/* Remember IRQ energest for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
2015-02-25 13:09:56 +01:00
/* Sync so that we get the latest values before adjusting recharge settings */
ti_lib_sys_ctrl_aon_sync();
/* Adjust recharge settings */
ti_lib_sys_ctrl_adjust_recharge_after_power_down();
/*
* Release the request to the uLDO
* This is likely not required, since the switch to GLDO/DCDC is automatic
* when coming back from deep sleep
*/
ti_lib_prcm_mcu_uldo_configure(false);
/* Turn on cache again */
ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_ENABLED);
ti_lib_prcm_cache_retention_enable();
2015-02-25 13:09:56 +01:00
ti_lib_aon_ioc_freeze_disable();
ti_lib_sys_ctrl_aon_sync();
/* Check operating conditions, optimally choose DCDC versus GLDO */
ti_lib_sys_ctrl_dcdc_voltage_conditional_control();
2015-02-25 13:09:56 +01:00
/* Fire up AUX is the user has requested this */
aux_ctrl_power_up();
/*
* We may or may not have been woken up by an AON RTC tick. If not, we need
* to adjust our software tick counter
*/
clock_update();
watchdog_periodic();
2015-02-25 13:09:56 +01:00
/* Notify all registered modules that we've just woken up */
for(module = list_head(modules_list); module != NULL;
module = module->next) {
if(module->wakeup) {
module->wakeup();
}
}
}
/*---------------------------------------------------------------------------*/
static void
deep_sleep(void)
2015-02-25 13:09:56 +01:00
{
uint32_t domains = LOCKABLE_DOMAINS;
2015-02-25 13:09:56 +01:00
lpm_registered_module_t *module;
/*
* Notify all registered modules that we are dropping to mode X. We do not
* need to do this for simple sleep.
*
* This is a chance for modules to delay us a little bit until an ongoing
* operation has finished (e.g. uart TX) or to configure themselves for
* deep sleep.
*
* At this stage, we also collect power domain locks, if any.
* The argument to PRCMPowerDomainOff() is a bitwise OR, so every time
* we encounter a lock we just clear the respective bits in the 'domains'
* variable as required by the lock. In the end the domains variable will
* just hold whatever has not been cleared
*/
for(module = list_head(modules_list); module != NULL;
module = module->next) {
if(module->shutdown) {
module->shutdown(LPM_MODE_DEEP_SLEEP);
}
2015-02-25 13:09:56 +01:00
/* Clear the bits specified in the lock */
domains &= ~module->domain_lock;
}
/* Pat the dog: We don't want it to shout right after we wake up */
watchdog_periodic();
/* Clear unacceptable bits, just in case a lock provided a bad value */
domains &= LOCKABLE_DOMAINS;
/*
* Freeze the IOs on the boundary between MCU and AON. We only do this if
* PERIPH is not needed
*/
if(domains & PRCM_DOMAIN_PERIPH) {
ti_lib_aon_ioc_freeze_enable();
}
/*
* Among LOCKABLE_DOMAINS, turn off those that are not locked
*
* If domains is != 0, pass it as-is
*/
if(domains) {
ti_lib_prcm_power_domain_off(domains);
}
/*
* Before entering Deep Sleep, we must switch off the HF XOSC. The HF XOSC
* is predominantly controlled by the RF driver. In a build with radio
* cycling (e.g. ContikiMAC), the RF driver will request the XOSC before
* using the Freq. Synth, and switch back to the RC when it is about to
* turn back off.
*
* If the radio is on, we won't even reach here, and if it's off the HF
* clock source should already be the HF RC.
*
* Nevertheless, request the switch to the HF RC explicitly here.
*/
oscillators_switch_to_hf_rc();
/* Shut Down the AUX if the user application is not using it */
aux_ctrl_power_down(false);
/* Configure clock sources for MCU: No clock */
ti_lib_aon_wuc_mcu_power_down_config(AONWUC_NO_CLOCK);
/* Full RAM retention. */
ti_lib_aon_wuc_mcu_sram_config(MCU_RAM0_RETENTION | MCU_RAM1_RETENTION |
MCU_RAM2_RETENTION | MCU_RAM3_RETENTION);
/*
* Always turn off RFCORE, CPU, SYSBUS and VIMS. RFCORE should be off
* already
*/
ti_lib_prcm_power_domain_off(PRCM_DOMAIN_RFCORE | PRCM_DOMAIN_CPU |
PRCM_DOMAIN_VIMS | PRCM_DOMAIN_SYSBUS);
/* Request JTAG domain power off */
ti_lib_aon_wuc_jtag_power_off();
/* Allow MCU and AUX powerdown */
ti_lib_aon_wuc_domain_power_down_enable();
/* Configure the recharge controller */
ti_lib_sys_ctrl_set_recharge_before_power_down(XOSC_IN_HIGH_POWER_MODE);
/*
* If both PERIPH and SERIAL PDs are off, request the uLDO as the power
* source while in deep sleep.
*/
if(domains == LOCKABLE_DOMAINS) {
ti_lib_pwr_ctrl_source_set(PWRCTRL_PWRSRC_ULDO);
}
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
/* Sync the AON interface to ensure all writes have gone through. */
ti_lib_sys_ctrl_aon_sync();
/*
* Explicitly turn off VIMS cache, CRAM and TRAM. Needed because of
* retention mismatch between VIMS logic and cache. We wait to do this
* until right before deep sleep to be able to use the cache for as long
* as possible.
*/
ti_lib_prcm_cache_retention_disable();
ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_OFF);
/* Deep Sleep */
ti_lib_prcm_deep_sleep();
/*
* When we reach here, some interrupt woke us up. The global interrupt
* flag is off, hence we have a chance to run things here. We will wake up
* the chip properly, and then we will enable the global interrupt without
* unpending events so the handlers can fire
*/
wake_up();
}
/*---------------------------------------------------------------------------*/
static void
safe_schedule_rtimer(rtimer_clock_t time, rtimer_clock_t now, int pm)
{
rtimer_clock_t min_sleep;
rtimer_clock_t max_sleep;
min_sleep = now + MINIMAL_SAFE_SCHEDUAL;
max_sleep = now + MAX_SLEEP_TIME;
if(RTIMER_CLOCK_LT(time, min_sleep)) {
/* ensure that we schedule sleep a minimal number of ticks into the
future */
soc_rtc_schedule_one_shot(AON_RTC_CH1, min_sleep);
} else if((pm == LPM_MODE_SLEEP) && RTIMER_CLOCK_LT(max_sleep, time)) {
/* if max_pm is LPM_MODE_SLEEP, we could trigger the watchdog if we slept
for too long. */
soc_rtc_schedule_one_shot(AON_RTC_CH1, max_sleep);
} else {
soc_rtc_schedule_one_shot(AON_RTC_CH1, time);
}
}
/*---------------------------------------------------------------------------*/
static int
setup_sleep_mode(void)
{
rtimer_clock_t et_distance = 0;
lpm_registered_module_t *module;
int max_pm;
int module_pm;
int etimer_is_pending;
rtimer_clock_t now;
rtimer_clock_t et_time;
rtimer_clock_t next_trig;
max_pm = LPM_MODE_MAX_SUPPORTED;
now = RTIMER_NOW();
if((LPM_MODE_MAX_SUPPORTED == LPM_MODE_AWAKE) || process_nevents()) {
return LPM_MODE_AWAKE;
}
etimer_is_pending = etimer_pending();
if(etimer_is_pending) {
et_distance = CLK_TO_RT(etimer_next_expiration_time() - clock_time());
if(RTIMER_CLOCK_LT(et_distance, 1)) {
/* there is an etimer which is already expired; we shouldn't go to
sleep at all */
return LPM_MODE_AWAKE;
}
}
next_trig = soc_rtc_get_next_trigger();
if(RTIMER_CLOCK_LT(next_trig, now + STANDBY_MIN_DURATION)) {
return LPM_MODE_SLEEP;
2015-02-25 13:09:56 +01:00
}
/* Collect max allowed PM permission from interested modules */
for(module = list_head(modules_list); module != NULL;
module = module->next) {
if(module->request_max_pm) {
module_pm = module->request_max_pm();
if(module_pm < max_pm) {
max_pm = module_pm;
}
}
}
/* Reschedule AON RTC CH1 to fire just in time for the next etimer event */
if(etimer_is_pending) {
et_time = soc_rtc_last_isr_time() + et_distance;
2015-02-25 13:09:56 +01:00
safe_schedule_rtimer(et_time, now, max_pm);
2015-02-25 13:09:56 +01:00
} else {
/* set a maximal sleep period if no etimers are queued */
soc_rtc_schedule_one_shot(AON_RTC_CH1, now + DEFAULT_SLEEP_TIME);
}
2015-02-25 13:09:56 +01:00
return max_pm;
}
/*---------------------------------------------------------------------------*/
void
lpm_drop()
{
uint8_t max_pm;
2015-02-25 13:09:56 +01:00
/* Critical. Don't get interrupted! */
ti_lib_int_master_disable();
2015-02-25 13:09:56 +01:00
max_pm = setup_sleep_mode();
2015-02-25 13:09:56 +01:00
/* Drop */
if(max_pm == LPM_MODE_SLEEP) {
lpm_sleep();
} else if(max_pm == LPM_MODE_DEEP_SLEEP) {
deep_sleep();
2015-02-25 13:09:56 +01:00
}
ti_lib_int_master_enable();
2015-02-25 13:09:56 +01:00
}
/*---------------------------------------------------------------------------*/
void
lpm_sleep(void)
{
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
2015-02-25 13:09:56 +01:00
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
/* Just to be on the safe side, explicitly disable Deep Sleep */
HWREG(NVIC_SYS_CTRL) &= ~(NVIC_SYS_CTRL_SLEEPDEEP);
ti_lib_prcm_sleep();
/* Remember IRQ energest for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
2015-02-25 13:09:56 +01:00
}
/*---------------------------------------------------------------------------*/
void
lpm_register_module(lpm_registered_module_t *module)
{
list_add(modules_list, module);
}
/*---------------------------------------------------------------------------*/
void
lpm_unregister_module(lpm_registered_module_t *module)
{
list_remove(modules_list, module);
}
/*---------------------------------------------------------------------------*/
void
2015-02-25 13:09:56 +01:00
lpm_init()
{
list_init(modules_list);
/* Always wake up on any DIO edge detection */
ti_lib_aon_event_mcu_wake_up_set(AON_EVENT_MCU_WU2, AON_EVENT_IO);
2015-02-25 13:09:56 +01:00
}
/*---------------------------------------------------------------------------*/
void
lpm_pin_set_default_state(uint32_t ioid)
{
if(ioid == IOID_UNUSED) {
return;
}
ti_lib_ioc_port_configure_set(ioid, IOC_PORT_GPIO, IOC_STD_OUTPUT);
ti_lib_gpio_dir_mode_set((1 << ioid), GPIO_DIR_MODE_IN);
}
/*---------------------------------------------------------------------------*/
2015-02-25 13:09:56 +01:00
/**
* @}
* @}
*/