osd-contiki/examples/osd/servo-sensor/run.sh

#!/bin/bash
# For the ages-old bootloader (before 2014) you want to use
# BOOTLOADER_GET_MAC=0x0001f3a0 as parameter to make below.
make clean TARGET=osd-merkur
make TARGET=osd-merkur
avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur
avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.hex
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.eep
add servo example 2013-02-22 17:04:19 +01:00			`#!/bin/bash`
Fix run.sh scripts to use jumptable of bootloader Otherwise a crash results with a bootloader compiled with a newer AVR toolchain (e.g. Debian Jessie). If you still have an ages-old bootloader without a jump-table, as a short-term measure you can revert this change in your run.sh. As a long-term fix we recommend you get your bootloader updated! 2016-02-19 17:32:09 +01:00			`# For the ages-old bootloader (before 2014) you want to use`
			`# BOOTLOADER_GET_MAC=0x0001f3a0 as parameter to make below.`
add servo example 2013-02-22 17:04:19 +01:00			`make clean TARGET=osd-merkur`
Fix run.sh scripts to use jumptable of bootloader Otherwise a crash results with a bootloader compiled with a newer AVR toolchain (e.g. Debian Jessie). If you still have an ages-old bootloader without a jump-table, as a short-term measure you can revert this change in your run.sh. As a long-term fix we recommend you get your bootloader updated! 2016-02-19 17:32:09 +01:00			`make TARGET=osd-merkur`
add servo example 2013-02-22 17:04:19 +01:00			`avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur`
			`avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.hex`
			`avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O ihex er-example-server.osd-merkur er-example-server.osd-merkur.eep`