osd-contiki/examples/zolertia/z1/ipv6/z1-websense/README.md

Z1 websense
===========

This example features a simple webserver running on top of the IPv6 contiki
stack on Zolertia Z1 motes to provide sensor values, and with a RPL border
router to bridge the sensor network to Internet.


To test the example in COOJA under Linux
----------------------------------------

1. Start COOJA and load the simulation "example-z1-websense.csc"

    make TARGET=cooja example-z1-websense.csc

2. Connect to the COOJA simulation using tunslip6:

    make connect-router-cooja

3. You should now be able to browse to the nodes using your web browser:

   Router: http://[fd00::0212:7401:0001:0101]/
   Node 2: http://[fd00::0212:7402:0002:0202]/


To run the example on real nodes under Linux
--------------------------------------------

1. Program the nodes with the websense application

    make TARGET=z1 z1-websense.upload

2. Disconnect the nodes and program one node with the RPL border router

    cd examples/ipv6/rpl-border-router && make TARGET=z1 border-router.upload

3. Connect to the border router using tunslip6:

    make connect-router

4. Reboot the router and note the router IP address

5. You should now be able to browse to your router node using your web
   browser: http://[<ROUTER IPv6 ADDRESS>]/. On this page you should
   see a list of all accessible nodes with their IP adresses.