osd-contiki/platform/msb430/doc/msb430.txt

52 lines
1.7 KiB
Plaintext
Raw Normal View History

2008-09-26 20:14:12 +02:00
/** \addtogroup platform
* @{
**/
/**
\defgroup msb430 The Modular Sensor Board
The Modular Sensor Board (MSB430) was developed by FU-Berlin and was
added as a platform in Contiki in the spring of 2007. In its basic form,
2009-05-26 16:34:22 +02:00
this board consists of a Texas Instruments MSP430f1612 processor, a
2008-09-26 20:14:12 +02:00
Chipcon CC1020 radio chip, an MMA7260Q accelerometer, and a Sensirion
2009-05-26 16:34:22 +02:00
SHT11 temperature and humidity sensor. The MSB also has an SD device,
which makes it suitable for storage-centric sensor networks. There are
also extended versions of the board that are equipped with a GPRS-modem
and a GPS-receiver.
2008-09-26 20:14:12 +02:00
\section msb430-programming Programming the MSB430
The msb430 port requires an installation of mspgcc
(http://mspgcc.sourceforge.net) to compile. Once the compilation tools
have been installed, you can compile your software and Contiki with
three main target types:
<file>.firmware - A system image in ELF format.
<file>.ihex - A firmware file converted to the Intel Hex format.
<file>.u - Direct upload to a node.
2009-05-26 16:34:22 +02:00
Before compiling your system, you may want to look at the configuration
options in platform/msb430/configure-conf.h.
2008-09-26 20:14:12 +02:00
The node is typically programmed by typing
make TARGET=msb430 <program name>.u
Alternatively, a ready .ihex file can be uploaded to the node by running
msp430-jtag -l <parallell port identifier> -e -I <ihex file>
2009-05-26 16:34:22 +02:00
Platform-specific example programs are included in platform/msb430/apps
and can be compiled and uploaded from platform/msb430. A larger set of
examples for Contiki in general are in the examples/ directory.
2008-09-26 20:14:12 +02:00
More information about the MSB430 platform can be found at
Scatterweb: http://www.scatterweb.com/content/products/MSB_en.html
@{
*/
/** @} */
/** @} */