osd-contiki/examples/osd/arduino-sketch/sketch.pde

44 lines
1.4 KiB
Plaintext
Raw Normal View History

/*
* Sample arduino sketch using contiki features.
* We turn the LED on and off and allow setting the interval and the
* brightness of the LED via coap.
* Unfortunately sleeping for long times in loop() isn't currently
* possible, something turns off the CPU (including PWM outputs) if a
* Proto-Thread is taking too long. We need to find out how to sleep in
* a Contiki-compatible way.
* Note that for a normal arduino sketch you won't have to include any
* of the contiki-specific files here, the sketch should just work.
*/
extern "C" {
#include <stdio.h>
#include "led_pwm.h"
#define LED_PIN 5
uint8_t pwm = 128;
uint8_t period_100ms = 10; /* one second */
uint16_t analog1_voltage = 0;
uint16_t analog5_voltage = 0;
}
void setup (void)
{
rest_init_engine ();
rest_activate_resource (&resource_led_pwm);
rest_activate_resource (&resource_led_period);
rest_activate_resource (&resource_analog1_voltage);
rest_activate_resource (&resource_analog5_voltage);
}
void loop (void)
{
/* Use 255 - pwm, LED on merkur-board is wired to +3.3V */
analogWrite (LED_PIN, 255 - pwm);
analog1_voltage = analogRead (1) * 1600L / 1023L;
analog5_voltage = analogRead (5) * 1600L / 1023L;
printf ("clock : %u\nmillis: %lu\n", clock_time (), millis ());
delay (period_100ms * 100);
analogWrite (LED_PIN, 255); /* OFF: LED on merkur-board is wired to +3.3V */
delay (period_100ms * 100);
}