osd-contiki/examples/osd/arduino-roomalert/Makefile

87 lines
2.6 KiB
Makefile
Raw Normal View History

2014-11-14 10:46:30 +01:00
# Set this to the name of your sketch (without extension .pde)
SKETCH=sketch
all: arduino-example \
arduino-example.osd-merkur.hex arduino-example.osd-merkur.eep
2014-12-07 21:39:46 +01:00
CONTIKI=../../..
2014-11-14 10:46:30 +01:00
2014-12-07 21:39:46 +01:00
# Contiki IPv6 configuration
CONTIKI_WITH_IPV6 = 1
2014-11-14 10:46:30 +01:00
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
2014-12-07 21:39:46 +01:00
PROJECT_SOURCEFILES += ${SKETCH}.cpp
# automatically build RESTful resources
REST_RESOURCES_DIR = ./resources
ifndef TARGET
REST_RESOURCES_FILES = $(notdir $(shell find $(REST_RESOURCES_DIR) -name '*.c'))
else
ifeq ($(TARGET), native)
REST_RESOURCES_FILES = $(notdir $(shell find $(REST_RESOURCES_DIR) -name '*.c'))
else
REST_RESOURCES_FILES = $(notdir $(shell find $(REST_RESOURCES_DIR) -name '*.c' ! -name 'res-plugtest*'))
endif
endif
PROJECTDIRS += $(REST_RESOURCES_DIR)
PROJECT_SOURCEFILES += $(REST_RESOURCES_FILES)
2014-11-14 10:46:30 +01:00
# variable for Makefile.include
ifneq ($(TARGET), minimal-net)
CFLAGS += -DUIP_CONF_IPV6_RPL=1
else
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
${info INFO: compiling without RPL}
CFLAGS += -DUIP_CONF_IPV6_RPL=0
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
endif
# linker optimizations
SMALL=1
2014-12-07 21:39:46 +01:00
# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
APPS += arduino
2014-11-14 10:46:30 +01:00
include $(CONTIKI)/Makefile.include
include $(CONTIKI)/apps/arduino/Makefile.include
2014-12-07 21:39:46 +01:00
arduino-example: arduino-example.osd-merkur
avr-size -C --mcu=MCU=atmega128rfa1 arduino-example.osd-merkur
2014-11-14 10:46:30 +01:00
arduino-example.osd-merkur.hex: arduino-example.osd-merkur
avr-objcopy -j .text -j .data -O ihex arduino-example.osd-merkur \
arduino-example.osd-merkur.hex
arduino-example.osd-merkur.eep: arduino-example.osd-merkur
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O ihex \
arduino-example.osd-merkur arduino-example.osd-merkur.eep
flash: arduino-example.osd-merkur.hex arduino-example.osd-merkur.eep
avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U \
flash:w:arduino-example.osd-merkur.hex:a -U \
eeprom:w:arduino-example.osd-merkur.eep:a
.PHONY: flash
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
connect-minimal:
sudo ip address add fdfd::1/64 dev tap0