332 lines
11 KiB
C
332 lines
11 KiB
C
|
/*
|
||
|
|
* Copyright (c) 2011, Hedde Bosman <heddebosman@incas3.eu>
|
||
|
|
*
|
||
|
|
* I2C communication device drivers for mc1322x
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions
|
||
|
|
* are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer in the
|
||
|
|
* documentation and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||
|
|
* SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
* $Id$
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "i2c.h"
|
||
|
|
|
||
|
|
#include <stdio.h>
|
||
|
|
|
||
|
|
static int8_t tx_byte_ctr;
|
||
|
|
static int8_t rx_byte_ctr;
|
||
|
|
|
||
|
|
static uint8_t* tx_buf_ptr;
|
||
|
|
static uint8_t* rx_buf_ptr;
|
||
|
|
|
||
|
|
|
||
|
|
volatile unsigned int i; // volatile to prevent optimization
|
||
|
|
|
||
|
|
static inline void i2c_send_byte(void) {
|
||
|
|
*I2CDR = *(tx_buf_ptr++); // set new byte, MCF is automatically cleared
|
||
|
|
tx_byte_ctr--;
|
||
|
|
}
|
||
|
|
static inline void i2c_recv_byte(void) {
|
||
|
|
*(rx_buf_ptr++) = *I2CDR;
|
||
|
|
rx_byte_ctr--;
|
||
|
|
}
|
||
|
|
|
||
|
|
//------------------------------------------------------------------------------
|
||
|
|
// void i2c_receiveinit(uint8_t slave_address,
|
||
|
|
// uint8_t prescale)
|
||
|
|
//
|
||
|
|
// This function initializes the USCI module for master-receive operation.
|
||
|
|
//
|
||
|
|
// IN: uint8_t slave_address => Slave Address
|
||
|
|
// uint8_t prescale => SCL clock adjustment
|
||
|
|
//-----------------------------------------------------------------------------
|
||
|
|
//static volatile uint8_t rx_byte_tot = 0;
|
||
|
|
void i2c_receiveinit(uint8_t slave_address, uint8_t byte_ctr, uint8_t *rx_buf) {
|
||
|
|
// wait for bus to be free before setting MSTA (assuming we're in a multi-master environment or still sending something else)
|
||
|
|
while(i2c_busy()) /* wait */;
|
||
|
|
|
||
|
|
// assert: rx_byte_ctr <= 0
|
||
|
|
// assert: tx_byte_ctr <= 0
|
||
|
|
tx_buf_ptr = 0;
|
||
|
|
tx_byte_ctr = 0; // indicate that nothing is to be received
|
||
|
|
rx_byte_ctr = byte_ctr;
|
||
|
|
rx_buf_ptr = rx_buf;
|
||
|
|
|
||
|
|
// clockdiv
|
||
|
|
//*I2CFDR = 0x20; // 150 khz for redbee econotag
|
||
|
|
|
||
|
|
// assume being master, thus no addres has to be set
|
||
|
|
*I2CCR = I2C_MEN |
|
||
|
|
#ifdef I2C_NON_BLOCKING
|
||
|
|
I2C_MIEN |
|
||
|
|
#endif
|
||
|
|
I2C_MSTA | I2C_MTX | I2C_RXAK; // start condition is triggered
|
||
|
|
|
||
|
|
// write out address of slave
|
||
|
|
*I2CDR = (slave_address & 0x7f) <<1 | 0x01;
|
||
|
|
|
||
|
|
#ifndef I2C_NON_BLOCKING
|
||
|
|
i2c_receive();
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
|
||
|
|
//------------------------------------------------------------------------------
|
||
|
|
// void i2c_transmitinit(uint8_t slave_address,
|
||
|
|
// uint8_t prescale)
|
||
|
|
//
|
||
|
|
// Initializes USCI for master-transmit operation.
|
||
|
|
//
|
||
|
|
// IN: uint8_t slave_address => Slave Address
|
||
|
|
// uint8_t prescale => SCL clock adjustment
|
||
|
|
//------------------------------------------------------------------------------
|
||
|
|
//static volatile uint8_t tx_byte_tot = 0;
|
||
|
|
void i2c_transmitinit(uint8_t slave_address, uint8_t byte_ctr, uint8_t *tx_buf) {
|
||
|
|
// wait for bus to be free before setting MSTA (assuming we're in a multi-master environment or still sending something else)
|
||
|
|
while(i2c_busy()) /* wait */;
|
||
|
|
|
||
|
|
// assert: rx_byte_ctr <= 0
|
||
|
|
// assert: tx_byte_ctr <= 0
|
||
|
|
rx_buf_ptr = 0;
|
||
|
|
rx_byte_ctr = 0; // indicate that nothing is to be received
|
||
|
|
tx_byte_ctr = byte_ctr;
|
||
|
|
tx_buf_ptr = tx_buf;
|
||
|
|
|
||
|
|
// clockdiv
|
||
|
|
//*I2CFDR = 0x20; // 150 khz for redbee econotag
|
||
|
|
|
||
|
|
// assume being master, thus no addres has to be set
|
||
|
|
*I2CCR = I2C_MEN |
|
||
|
|
#ifdef I2C_NON_BLOCKING
|
||
|
|
I2C_MIEN |
|
||
|
|
#endif
|
||
|
|
I2C_MSTA | I2C_MTX ; // start condition is triggered
|
||
|
|
|
||
|
|
// write out address of slave
|
||
|
|
*I2CDR = (slave_address & 0x7f) <<1;
|
||
|
|
|
||
|
|
#ifndef I2C_NON_BLOCKING
|
||
|
|
i2c_transmit();
|
||
|
|
#endif
|
||
|
|
}
|
||
|
|
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
/*- blocking counterparts of interrupt hanlder function ---------------------*/
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
#ifndef I2C_NON_BLOCKING
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
uint8_t i2c_receive() {
|
||
|
|
while(rx_byte_ctr > 0) {
|
||
|
|
// busy wait
|
||
|
|
while(!(*I2CSR & I2C_MCF) || !(*I2CSR & I2C_MIF)) /*wait*/;
|
||
|
|
|
||
|
|
if (rx_byte_ctr == 1) { // receiving next-to-last byte, thus turn off auto-ack for stop condition
|
||
|
|
*I2CCR |= I2C_TXAK;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (*I2CSR & I2C_MCF) {
|
||
|
|
i2c_recv_byte(); // read new byte
|
||
|
|
}
|
||
|
|
|
||
|
|
if (*I2CSR & I2C_MAL) {
|
||
|
|
*I2CSR &= ~I2C_MAL; // should be cleared in software
|
||
|
|
printf("*** ERROR I2C: Arbitration lost\n");
|
||
|
|
// Arbitration lost; ERROR?
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
while(!(*I2CSR & I2C_MCF) || !(*I2CSR & I2C_MIF)) /*wait*/;
|
||
|
|
if (*I2CSR & I2C_RXAK) {
|
||
|
|
// NO acknoledge byte received
|
||
|
|
printf("*** ERROR I2C: No ack received\n");
|
||
|
|
}
|
||
|
|
if (*I2CSR & I2C_MAL) {
|
||
|
|
*I2CSR &= ~I2C_MAL; // should be cleared in software
|
||
|
|
printf("*** ERROR I2C: Arbitration lost\n");
|
||
|
|
// Arbitration lost; ERROR?
|
||
|
|
}
|
||
|
|
|
||
|
|
*I2CCR &= ~I2C_MSTA; // stop condition
|
||
|
|
}
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
void i2c_transmit() {
|
||
|
|
while(tx_byte_ctr > 0) {
|
||
|
|
// busy wait
|
||
|
|
while(!(*I2CSR & I2C_MCF) || !(*I2CSR & I2C_MIF)) /*wait*/;
|
||
|
|
|
||
|
|
if (*I2CSR & I2C_RXAK) {
|
||
|
|
// NO acknoledge byte received
|
||
|
|
printf("*** ERROR I2C: No ack received\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
if (*I2CSR & I2C_MCF) {
|
||
|
|
i2c_send_byte();
|
||
|
|
}
|
||
|
|
|
||
|
|
if (*I2CSR & I2C_MAL) {
|
||
|
|
*I2CSR &= ~I2C_MAL; // should be cleared in software
|
||
|
|
printf("*** ERROR I2C: Arbitration lost\n");
|
||
|
|
// Arbitration lost; ERROR?
|
||
|
|
}
|
||
|
|
|
||
|
|
// clear MIF
|
||
|
|
*I2CSR &= ~I2C_MIF;
|
||
|
|
}
|
||
|
|
|
||
|
|
while(!(*I2CSR & I2C_MCF) || !(*I2CSR & I2C_MIF)) /*wait*/;
|
||
|
|
if (*I2CSR & I2C_RXAK) {
|
||
|
|
// NO acknoledge byte received
|
||
|
|
printf("*** ERROR I2C: No ack received\n");
|
||
|
|
}
|
||
|
|
if (*I2CSR & I2C_MAL) {
|
||
|
|
*I2CSR &= ~I2C_MAL; // should be cleared in software
|
||
|
|
printf("*** ERROR I2C: Arbitration lost\n");
|
||
|
|
// Arbitration lost; ERROR?
|
||
|
|
}
|
||
|
|
|
||
|
|
*I2CCR &= ~I2C_MSTA; // stop condition
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
|
||
|
|
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
/* force SCL to become bus master when sda is still low (can occur after sys reset */
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
void i2c_force_reset(void) {
|
||
|
|
uint8_t tmp;
|
||
|
|
*I2CCR = 0x20;
|
||
|
|
*I2CCR = 0xA0;
|
||
|
|
tmp = *I2CDR;
|
||
|
|
// return to module state Master?
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
/*- check if we're still in the process of sending something ----------------*/
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
uint8_t i2c_transferred(void) {
|
||
|
|
return (!i2c_busy() && rx_byte_ctr == 0 && tx_byte_ctr == 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
/* check if there is communication in progress on the i2c bus. */
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
uint8_t i2c_busy(void) {
|
||
|
|
return ((*I2CSR & I2C_MBB) > 0); // bit 5 high = busy
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
/* Setup ports and pins for I2C use. */
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
void i2c_enable(void) {
|
||
|
|
// enable clock signal to i2c module
|
||
|
|
*I2CCKER = I2C_CKEN; // enable
|
||
|
|
|
||
|
|
enable_irq(I2C);
|
||
|
|
|
||
|
|
*I2CFDR = 0x20; // clockdiv: 150 khz for redbee econotag
|
||
|
|
*I2CADR = 0x01; // our slave address (not used; we're master)
|
||
|
|
// then enable i2c module
|
||
|
|
*I2CCR |= I2C_MEN | // module-enable, auto-ack = on
|
||
|
|
#ifdef I2C_NON_BLOCKING
|
||
|
|
I2C_MIEN | //module-interrupt-enable
|
||
|
|
#endif
|
||
|
|
0;
|
||
|
|
|
||
|
|
// then switch gpio pins to i2c
|
||
|
|
*GPIO_FUNC_SEL0 |= (0x01 << (I2C_SCL*2)) | (0x01 << (I2C_SDA*2)); // GPIO 12, 13 to i2c
|
||
|
|
// and enable pull-up resistors
|
||
|
|
*GPIO_PAD_PU_EN0 |= (0x01 << I2C_SCL) | (0x01 << I2C_SDA); // Activate internal pull-up/-down resistors
|
||
|
|
*GPIO_PAD_PU_SEL0 |= (0x01 << I2C_SCL) | (0x01 << I2C_SDA); // select pull-up resistors for ports
|
||
|
|
}
|
||
|
|
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
/* Reset ports and pins for GPIO use. */
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
void i2c_disable(void) {
|
||
|
|
// all control values are set off
|
||
|
|
*I2CCR = 0;
|
||
|
|
// clock is turned off
|
||
|
|
*I2CCKER = ~I2C_CKEN;
|
||
|
|
|
||
|
|
// then switch gpio pins to gpio
|
||
|
|
*GPIO_FUNC_SEL0 &= ~(0x01 << (I2C_SCL*2)) | (0x01 << (I2C_SDA*2)); // GPIO 12, 13 to i2c
|
||
|
|
// and disable resistors
|
||
|
|
*GPIO_PAD_PU_EN0 &= ~(0x01 << I2C_SCL) | (0x01 << I2C_SDA); // Deactivate internal pull-up/-down resistors
|
||
|
|
|
||
|
|
disable_irq(I2C);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
/*- i2c interrupt handler --------------------------------------------------*/
|
||
|
|
/*----------------------------------------------------------------------------*/
|
||
|
|
#ifdef I2C_NON_BLOCKING
|
||
|
|
void i2c_isr (void) {
|
||
|
|
uint8_t dummy;
|
||
|
|
if (*I2CSR & I2C_MIF) { // interrupt is from i2c
|
||
|
|
if (*I2CSR & I2C_MCF) { // one byte transferred/received. will be cleared automatically when I2CDR is written or I2CSR read
|
||
|
|
if (tx_buf_ptr != 0) { // we're sending
|
||
|
|
if (*I2CSR & I2C_RXAK) {
|
||
|
|
// NO acknoledge byte received
|
||
|
|
printf("*** ERROR I2C: No ack received\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
if (tx_byte_ctr > 0) { // tx
|
||
|
|
i2c_send_byte(); // set new byte, MCF is automatically cleared
|
||
|
|
} else {
|
||
|
|
*I2CCR &= ~I2C_MSTA; // generate stop condition
|
||
|
|
}
|
||
|
|
} else { //if (rx_buf_ptr != 0) { // receive
|
||
|
|
if (rx_byte_ctr == 1) { // receiving next-to-last byte, thus turn off auto-ack for stop condition
|
||
|
|
*I2CCR |= I2C_TXAK;
|
||
|
|
}
|
||
|
|
if (*I2CCR & I2C_MTX) { // address byte was just sent
|
||
|
|
*I2CCR &= ~I2C_MTX; // switch to receive mode
|
||
|
|
dummy = *I2CDR; // dummy read to throw away the address from register
|
||
|
|
|
||
|
|
} else if (rx_byte_ctr > 0) {
|
||
|
|
i2c_recv_byte(); // read new byte
|
||
|
|
} else {
|
||
|
|
*I2CCR &= ~I2C_MSTA; // generate stop condition
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
}
|
||
|
|
if (*I2CSR & I2C_MAL) {
|
||
|
|
*I2CSR &= ~I2C_MAL; // should be cleared in software
|
||
|
|
printf("*** ERROR I2C: Arbitration lost\n");
|
||
|
|
// Arbitration lost; reset..
|
||
|
|
rx_byte_ctr = tx_byte_ctr = 0;
|
||
|
|
*I2CCR &= ~I2C_MSTA; // generate stop condition
|
||
|
|
}
|
||
|
|
|
||
|
|
// clear MIF
|
||
|
|
*I2CSR &= ~I2C_MIF;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif
|