osd-contiki/examples/osd/triggerbaord/sketch.pde

/*
 * Sample arduino sketch using contiki features.
 * We turn the LED off 
 * We allow read the moisture sensor
 * Unfortunately sleeping for long times in loop() isn't currently
 * possible, something turns off the CPU (including PWM outputs) if a
 * Proto-Thread is taking too long. We need to find out how to sleep in
 * a Contiki-compatible way.
 * Note that for a normal arduino sketch you won't have to include any
 * of the contiki-specific files here, the sketch should just work.
 */

extern "C" {
#include "arduino-process.h"
#include "rest-engine.h"
#include "er-coap-engine.h"
#include "net/netstack.h"
#include "dev/button-sensor.h"

extern resource_t 
    res_led,
    res_bled, 
    res_battery, 
    res_cputemp,
    res_event,
    res_separate,
    res_server;

uint8_t led_pin=4;
uint8_t led_status;
uint8_t bled_pin=7;
uint8_t bled_status;
}

#define REMOTE_PORT UIP_HTONS(COAP_DEFAULT_PORT)
// should be the same :-)
#define UIP_NTOHS(x) UIP_HTONS(x)
#define SERVER_NODE(ip) \
    uip_ip6addr(ip,0xfe80,0,0,0,0,0,0,0x01)

uip_ipaddr_t server_ipaddr, tmp_addr;
char         server_resource [20] = "button";

extern int32_t event_counter; 
   
void setup (void)
{
    // switch off the led
    pinMode(led_pin, OUTPUT);
    digitalWrite(led_pin, HIGH);
    led_status=0;
    // switch off the bled
    pinMode(bled_pin, OUTPUT);
    digitalWrite(bled_pin, LOW);
    bled_status=0;
    // sensors
    SENSORS_ACTIVATE(button_sensor);
    // init coap resourcen
    rest_init_engine ();
    SERVER_NODE (&server_ipaddr);
    #pragma GCC diagnostic ignored "-Wwrite-strings"
    rest_activate_resource (&res_led, "s/led");
    rest_activate_resource (&res_bled, "s/bled");
    rest_activate_resource (&res_battery, "s/battery");
    rest_activate_resource (&res_cputemp, "s/cputemp");
    rest_activate_resource(&res_event, "s/button");         
    #pragma GCC diagnostic pop

//    mcu_sleep_set(64);
    NETSTACK_MAC.off(1);
}

int coap_server_post(void)
{
    static coap_packet_t request [1]; /* Array: treat as pointer */
    char buf [9];
    coap_transaction_t *transaction;
    int buttonstate = button_sensor.value(0);
    sprintf (buf, "state=%d&event=%lu",buttonstate,event_counter);
//  printf ("%s\n", buf);
    coap_init_message (request, COAP_TYPE_NON, COAP_PUT, 0);
    coap_set_header_uri_path (request, server_resource);
    coap_set_header_content_format (request, REST.type.TEXT_PLAIN);
    coap_set_payload (request, buf, strlen (buf));
    request->mid = coap_get_mid ();
    transaction = coap_new_transaction
        (request->mid, &server_ipaddr, REMOTE_PORT);
    transaction->packet_len = coap_serialize_message
        (request, transaction->packet);
    coap_send_transaction (transaction);
    return 0;
}

void loop (void)
{

}