osd-contiki/cpu/cc26xx/dev/cc26xx-rf.h

117 lines
4.4 KiB
C
Raw Normal View History

2015-02-25 13:09:56 +01:00
/*
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc26xx
* @{
*
* \defgroup cc26xx-rf CC26xx RF driver
*
* The CC26xx RF has dual capability: It can operate in IEEE 802.15.4 mode at
* 2.4GHz, but it can also operate in BLE mode. This driver provides a fully
* contiki-compliant .15.4 functionality, but it also provides some very basic
* BLE capability.
*
* @{
*/
/**
* \file
* Header file for the CC26xx RF driver
*/
#ifndef CC26XX_RF_H_
#define CC26XX_RF_H_
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "cc26xx-model.h"
#include "dev/radio.h"
/*---------------------------------------------------------------------------*/
#include <stdint.h>
/*---------------------------------------------------------------------------*/
#ifdef CC26XX_RF_CONF_CHANNEL
#define CC26XX_RF_CHANNEL CC26XX_RF_CONF_CHANNEL
#else
#define CC26XX_RF_CHANNEL 18
#endif /* CC26XX_RF_CONF_CHANNEL */
#ifdef CC26XX_RF_CONF_AUTOACK
#define CC26XX_RF_AUTOACK CC26XX_RF_CONF_AUTOACK
#else
#define CC26XX_RF_AUTOACK 1
#endif /* CC26XX_RF_CONF_AUTOACK */
2015-05-01 17:16:55 +02:00
#if (CC26XX_RF_CONF_BLE_SUPPORT) && (CC26XX_MODEL_CPU_VARIANT == 2650)
2015-02-25 13:09:56 +01:00
#define CC26XX_RF_BLE_SUPPORT CC26XX_RF_CONF_BLE_SUPPORT
#else
#define CC26XX_RF_BLE_SUPPORT 0
#endif
/*---------------------------------------------------------------------------
* RF Config
*---------------------------------------------------------------------------*/
/* Constants */
#define CC26XX_RF_CHANNEL_MIN 11
#define CC26XX_RF_CHANNEL_MAX 26
#define CC26XX_RF_CHANNEL_SPACING 5
#define CC26XX_RF_CHANNEL_SET_ERROR -1
#define CC26XX_RF_MAX_PACKET_LEN 127
#define CC26XX_RF_MIN_PACKET_LEN 4
/*---------------------------------------------------------------------------*/
/**
* \brief Set the device name to use with the BLE advertisement/beacon daemon
* \param interval The interval (ticks) between two consecutive beacon bursts
* \param name The device name to advertise
*
* If name is NULL it will be ignored. If interval==0 it will be ignored. Thus,
* this function can be used to configure a single parameter at a time if so
* desired.
*/
void cc26xx_rf_ble_beacond_config(clock_time_t interval, const char *name);
/**
* \brief Start the BLE advertisement/beacon daemon
* \return 1: Success, 0: Failure
*
* Before calling this function, the name to advertise must first be set by
* calling cc26xx_rf_ble_beacond_set_adv_name(). Otherwise, this function will
* return an error.
*/
uint8_t cc26xx_rf_ble_beacond_start(void);
/**
* \brief Stop the BLE advertisement/beacon daemon
*/
void cc26xx_rf_ble_beacond_stop(void);
/*---------------------------------------------------------------------------*/
#endif /* CC26XX_RF_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/