osd-contiki/cpu/avr/dev/usb/serial/uart_usb_lib.c

313 lines
7.2 KiB
C
Raw Normal View History

2008-10-14 22:16:36 +02:00
/* This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file uart_usb_lib.c *********************************************************************
*
* \brief
* This file controls the UART USB functions.
*
* \addtogroup usbstick
*
* \author
* Atmel Corporation: http://www.atmel.com \n
* Support email: avr@atmel.com
*
******************************************************************************/
/* Copyright (c) 2008 ATMEL Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of the copyright holders nor the names of
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
/*_____ I N C L U D E S ____________________________________________________*/
#include "config.h"
#include "usb_drv.h"
#include "usb_descriptors.h"
#include "serial/uart_usb_lib.h"
#include <stdio.h>
/**
\addtogroup cdctask
@{
*/
/*_____ M A C R O S ________________________________________________________*/
#ifndef USB_CDC_ACM_HOOK_TX_START
#define USB_CDC_ACM_HOOK_TX_START(char)
#endif
#ifndef USB_CDC_ACM_HOOK_TX_END
#define USB_CDC_ACM_HOOK_TX_END(char)
#endif
#ifndef USB_CDC_ACM_HOOK_CLS_CHANGED
#define USB_CDC_ACM_HOOK_CLS_CHANGED(state)
#endif
#ifndef USB_CDC_ACM_HOOK_CONFIGURED
#define USB_CDC_ACM_HOOK_CONFIGURED()
#endif
#ifndef USB_CDC_ACM_CONF_LOCAL_ECHO
#define USB_CDC_ACM_CONF_LOCAL_ECHO 0
#endif
2008-10-14 22:16:36 +02:00
/*_____ D E F I N I T I O N ________________________________________________*/
Uchar tx_counter;
Uchar rx_counter;
S_line_coding line_coding;
/*_____ D E C L A R A T I O N ______________________________________________*/
void uart_usb_configure_endpoints() {
usb_configure_endpoint(
VCP_INT_EP,
TYPE_INTERRUPT,
DIRECTION_IN,
SIZE_32,
ONE_BANK,
NYET_ENABLED
);
usb_configure_endpoint(
VCP_TX_EP,
TYPE_BULK,
DIRECTION_IN,
SIZE_32,
TWO_BANKS,
NYET_ENABLED
);
usb_configure_endpoint(
VCP_RX_EP,
TYPE_BULK,
DIRECTION_OUT,
SIZE_32,
TWO_BANKS,
NYET_ENABLED
);
Usb_reset_endpoint(VCP_INT_EP);
Usb_reset_endpoint(VCP_TX_EP);
Usb_reset_endpoint(VCP_RX_EP);
USB_CDC_ACM_HOOK_CONFIGURED();
}
2008-10-14 22:16:36 +02:00
int usb_stdout_putchar(char c, FILE *stream)
{
// Preserve the currently selected endpoint
uint8_t uenum = UENUM;
// send to USB port
// don't send anything if USB can't accept chars
Usb_select_endpoint(VCP_TX_EP);
if(usb_endpoint_wait_for_write_enabled()!=0)
return 0;
if(c=='\n')
uart_usb_putchar('\r');
if(c!='\r')
uart_usb_putchar(c);
// Restore previously selected endpoint
UENUM = uenum;
2008-10-14 22:16:36 +02:00
return 0;
}
2008-10-14 22:16:36 +02:00
static FILE usb_stdout = FDEV_SETUP_STREAM(usb_stdout_putchar,
NULL,
_FDEV_SETUP_WRITE);
/**
* @brief Initializes the uart_usb library
*/
void uart_usb_init(void)
{
tx_counter = 0;
rx_counter = 0;
}
void uart_usb_set_stdout(void)
{
stdout = &usb_stdout;
}
static uint8_t uart_usb_control_line_state = 0;
uint8_t uart_usb_get_control_line_state(void) {
return uart_usb_control_line_state;
}
void uart_usb_set_control_line_state(uint8_t control_line_state)
{
uart_usb_control_line_state = control_line_state;
USB_CDC_ACM_HOOK_CLS_CHANGED(control_line_state);
}
2008-10-14 22:16:36 +02:00
/**
* @brief This function checks if the USB emission buffer is ready to accept at
* at least 1 byte
*
* @retval TRUE if the firmware can write a new byte to transmit.
* @retval FALSE otherwise
*/
bit uart_usb_tx_ready(void)
{
Usb_select_endpoint(VCP_TX_EP);
2008-10-14 22:16:36 +02:00
if (!Is_usb_write_enabled())
{
return FALSE;
}
return TRUE;
}
/**
* @brief This function fills the USB transmit buffer with the new data. This buffer
* is sent if complete. To flush this buffer before waiting full, launch
* the uart_usb_flush() function.
*
* @param data_to_send Data to send
*
* @return data_to_send Data that was sent
*/
int uart_usb_putchar(int data_to_send)
{
// Preserve the currently selected endpoint
uint8_t uenum = UENUM;
USB_CDC_ACM_HOOK_TX_START(data_to_send);
Usb_select_endpoint(VCP_TX_EP);
if(!uart_usb_tx_ready()) {
data_to_send=-1;
goto bail;
}
2008-10-14 22:16:36 +02:00
Usb_write_byte(data_to_send);
tx_counter++;
//If Endpoint full -> flush
if(!Is_usb_write_enabled())
uart_usb_flush();
USB_CDC_ACM_HOOK_TX_END(data_to_send);
bail:
// Restore previously selected endpoint
UENUM = uenum;
2008-10-14 22:16:36 +02:00
return data_to_send;
}
/**
* @brief This function checks if a character has been received on the USB bus.
*
* @return bit (true if a byte is ready to be read)
*/
bit uart_usb_test_hit(void)
{
if (!rx_counter)
{
// Preserve the currently selected endpoint
uint8_t uenum = UENUM;
2008-10-14 22:16:36 +02:00
Usb_select_endpoint(VCP_RX_EP);
if (Is_usb_receive_out())
{
rx_counter = Usb_byte_counter();
if (!rx_counter)
{
Usb_ack_receive_out();
}
}
// Restore previously selected endpoint
UENUM = uenum;
2008-10-14 22:16:36 +02:00
}
return (rx_counter!=0);
}
/**
* @brief This function reads one byte from the USB bus
*
* If one byte is present in the USB fifo, this byte is returned. If no data
* is present in the USB fifo, this function waits for USB data.
*
* @return U8 byte received
*/
char uart_usb_getchar(void)
{
register Uchar data_rx;
// Preserve the currently selected endpoint
uint8_t uenum = UENUM;
2008-10-14 22:16:36 +02:00
Usb_select_endpoint(VCP_RX_EP);
if (!rx_counter) while (!uart_usb_test_hit());
data_rx=Usb_read_byte();
rx_counter--;
if (!rx_counter) Usb_ack_receive_out();
#if USB_CDC_ACM_CONF_LOCAL_ECHO
//Local echo
uart_usb_putchar(data_rx);
#endif
// Restore previously selected endpoint
UENUM = uenum;
2008-10-14 22:16:36 +02:00
return data_rx;
}
/**
* @brief This function sends the data stored in the USB transmit buffer.
* This function does nothing if there is no data in the buffer.
*/
void uart_usb_flush (void)
{
// Preserve the currently selected endpoint
uint8_t uenum = UENUM;
Usb_select_endpoint(VCP_TX_EP);
Usb_send_in();
2008-10-14 22:16:36 +02:00
tx_counter = 0;
usb_endpoint_wait_for_write_enabled();
// Restore previously selected endpoint
UENUM = uenum;
2008-10-14 22:16:36 +02:00
}
/** @} */