osd-contiki/tests/blink-red.c

#include <mc1322x.h>
#include <board.h>

#define DELAY 400000

#define LED LED_RED

void main(void) {	
	volatile uint32_t i;
	
	*GPIO_PAD_DIR0 = ( 1<< LED );

	while(1) {

		*GPIO_DATA0 = (1 << LED );
		
		for(i=0; i<DELAY; i++) { continue; }

		*GPIO_DATA0 = 0x00000000;

		for(i=0; i<DELAY; i++) { continue; }

	};

}
checkpoint 2010-02-21 16:25:22 +01:00			`#include <mc1322x.h>`
fix blink-red 2010-02-23 21:52:46 +01:00			`#include <board.h>`
updated to use the leds on the RedBee hardware and made it a little more general. Signed-off-by: Mariano Alvira <mar@devl.org> 2009-06-22 18:35:39 +02:00
clean up 2009-11-04 23:30:18 +01:00			`#define DELAY 400000`
preliminary interrupts. looks like it is entering the isr but isn't leaving correctly. 2009-04-21 00:31:13 +02:00
LEDs now indicate bit position (instead of (1 << pos)) which is more consistent with how everything else works 2010-03-07 21:39:56 +01:00			`#define LED LED_RED`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 21:00:10 +01:00
clean up 2009-11-04 23:30:18 +01:00			`void main(void) {`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 21:00:10 +01:00			`volatile uint32_t i;`
clean up 2009-11-04 23:30:18 +01:00
LEDs now indicate bit position (instead of (1 << pos)) which is more consistent with how everything else works 2010-03-07 21:39:56 +01:00			`*GPIO_PAD_DIR0 = ( 1<< LED );`
clean up 2009-11-04 23:30:18 +01:00
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 21:00:10 +01:00			`while(1) {`

LEDs now indicate bit position (instead of (1 << pos)) which is more consistent with how everything else works 2010-03-07 21:39:56 +01:00			`*GPIO_DATA0 = (1 << LED );`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 21:00:10 +01:00
			`for(i=0; i<DELAY; i++) { continue; }`

clean up 2009-11-04 23:30:18 +01:00			`*GPIO_DATA0 = 0x00000000;`
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 21:00:10 +01:00
			`for(i=0; i<DELAY; i++) { continue; }`

			`};`
clean up 2009-11-04 23:30:18 +01:00
initial commit. includes test code that toggles pin 26 and a perl script that loads the code over UART1. 2009-03-27 21:00:10 +01:00			`}`
clean up 2009-11-04 23:30:18 +01:00