osd-contiki/examples/osd/pingtheplug/Makefile

74 lines
2.2 KiB
Makefile
Raw Normal View History

2015-04-22 14:18:10 +02:00
ifeq ($(TARGET), osd-merkur)
PLATFORM_FILES= avr-size er-example-server.osd-merkur.hex \
er-example-server.osd-merkur.eep
endif
2013-05-28 10:55:14 +02:00
2015-04-22 14:18:10 +02:00
all: er-example-server $(PLATFORM_FILES)
# use this target explicitly if requried: er-plugtest-server
2013-05-28 10:55:14 +02:00
2015-04-22 14:18:10 +02:00
CONTIKI=../../..
2013-08-20 11:18:58 +02:00
2015-04-22 14:18:10 +02:00
# Contiki IPv6 configuration
CONTIKI_WITH_IPV6 = 1
2013-05-28 10:55:14 +02:00
2013-08-20 11:18:58 +02:00
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
# pcintkey
PROJECT_SOURCEFILES += pcintkey.c
2014-05-27 11:31:54 +02:00
PROJECT_SOURCEFILES += statusled.c
2013-05-28 10:55:14 +02:00
2013-08-20 11:18:58 +02:00
# variable for Makefile.include
2013-05-28 10:55:14 +02:00
ifneq ($(TARGET), minimal-net)
2013-08-20 11:18:58 +02:00
CFLAGS += -DUIP_CONF_IPV6_RPL=1
2013-05-28 10:55:14 +02:00
else
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
${info INFO: compiling without RPL}
2013-08-20 11:18:58 +02:00
CFLAGS += -DUIP_CONF_IPV6_RPL=0
2013-05-28 10:55:14 +02:00
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
2013-08-20 11:18:58 +02:00
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
2013-05-28 10:55:14 +02:00
endif
# linker optimizations
SMALL=1
2015-04-22 14:18:10 +02:00
# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
APPS += json json-resource
2013-05-28 10:55:14 +02:00
2015-04-22 14:18:10 +02:00
include $(CONTIKI)/Makefile.include
2013-05-28 10:55:14 +02:00
2015-04-22 14:18:10 +02:00
avr-size: er-example-server.osd-merkur
avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur
2013-05-28 10:55:14 +02:00
2015-04-22 14:18:10 +02:00
er-example-server.osd-merkur.hex: er-example-server.osd-merkur
avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur \
er-example-server.osd-merkur.hex
er-example-server.osd-merkur.eep: er-example-server.osd-merkur
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O ihex \
er-example-server.osd-merkur er-example-server.osd-merkur.eep
flash: er-example-server.osd-merkur.hex er-example-server.osd-merkur.eep
avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U \
flash:w:er-example-server.osd-merkur.hex:a -U \
eeprom:w:er-example-server.osd-merkur.eep:a
2013-05-28 10:55:14 +02:00
2015-04-22 14:18:10 +02:00
.PHONY: flash avr-size
2013-05-28 10:55:14 +02:00
2015-04-22 14:18:10 +02:00
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
2013-05-28 10:55:14 +02:00
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
2015-04-22 14:18:10 +02:00
connect-router: $(CONTIKI)/tools/tunslip6
2013-05-28 10:55:14 +02:00
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
2015-04-22 14:18:10 +02:00
connect-router-cooja: $(CONTIKI)/tools/tunslip6
2013-05-28 10:55:14 +02:00
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
2013-08-20 11:18:58 +02:00
connect-minimal:
2013-05-28 10:55:14 +02:00
sudo ip address add fdfd::1/64 dev tap0