osd-contiki/cpu/avr/dev/clock.c

337 lines
9.7 KiB
C
Raw Normal View History

#include "sys/clock.h"
#include "dev/clock-avr.h"
#include "sys/etimer.h"
#include <avr/io.h>
#include <avr/interrupt.h>
/*
CLOCK_SECOND is the number of ticks per second.
It is defined through CONF_CLOCK_SECOND in the contiki-conf.h for each platform.
The usual AVR defaults are 128 or 125 ticks per second, counting a prescaled CPU clock
using the 8 bit timer0.
As clock_time_t is an unsigned 16 bit data type, intervals up to 512 or 524 seconds
can be measured with ~8 millisecond precision.
For longer intervals a 32 bit global is incremented every second.
clock-avr.h contains the specific setup code for each mcu.
*/
/* count is a 16 bit tick counter that wraps every ~10 minutes, returned by clock_time() */
static volatile clock_time_t count;
/* scount is the 8 bit counter that counts ticks modulo CLOCK_SECONDS */
static volatile uint8_t scount;
/* seconds is the number of seconds since startup, returned by clock_seconds() */
volatile unsigned long seconds;
/* sleepseconds is the number of seconds sleeping since startup, available globally */
long sleepseconds;
/* Set RADIOSTATS to monitor radio on time (must also be set in the radio driver) */
2011-07-24 17:43:17 +02:00
#if RF230BB && AVR_WEBSERVER
#define RADIOSTATS 1
#endif
#if RADIOSTATS
static volatile uint8_t rcount;
volatile unsigned long radioontime;
extern uint8_t RF230_receive_on;
#endif
2011-08-13 17:38:38 +02:00
/* Set RADIO_CONF_CALIBRATE_INTERVAL for periodic calibration of the PLL during extended radio on time.
* The RF230 data sheet suggests every 5 minutes if the temperature is fluctuating.
* At present the specified interval is ignored, and an 8 bit counter gives 256 second intervals.
* Actual calibration is done by the driver on the next transmit request.
*/
2011-08-13 17:38:38 +02:00
#if RADIO_CONF_CALIBRATE_INTERVAL
extern volatile uint8_t rf230_calibrate;
static uint8_t calibrate_interval;
#endif
#if 0
/*---------------------------------------------------------------------------*/
/* This routine can be called to add seconds to the clock after a sleep
* of an integral number of seconds.
*/
void clock_adjust_seconds(uint8_t howmany) {
seconds += howmany;
sleepseconds +=howmany;
count += howmany * CLOCK_SECOND;
#if RADIOSTATS
if (RF230_receive_on) radioontime += howmany;
#endif
}
#endif
/*---------------------------------------------------------------------------*/
/* This routine can be called to add ticks to the clock after a sleep.
* Leap ticks or seconds can (rarely) be introduced if the ISR is not blocked.
*/
void clock_adjust_ticks(uint16_t howmany) {
// uint8_t sreg = SREG;cli();
count += howmany;
howmany+= scount;
while(howmany >= CLOCK_SECOND) {
howmany -= CLOCK_SECOND;
seconds++;
sleepseconds++;
#if RADIOSTATS
if (RF230_receive_on) radioontime += 1;
#endif
}
scount = howmany;
// SREG=sreg;
}
/*---------------------------------------------------------------------------*/
//SIGNAL(SIG_OUTPUT_COMPARE0)
ISR(AVR_OUTPUT_COMPARE_INT)
{
2009-04-06 15:08:42 +02:00
count++;
if(++scount >= CLOCK_SECOND) {
2009-04-06 15:08:42 +02:00
scount = 0;
seconds++;
}
#if F_CPU == 0x800000 && USE_32K_CRYSTAL
/* Special routine to phase lock CPU to 32768 watch crystal.
We are interrupting 128 times per second.
If RTIMER_ARCH_SECOND is a multiple of 128 we can use the residual modulo
128 to determine whether the clock is too fast or too slow.
E.g. for 8192 the phase should be constant modulo 0x40
OSCCAL is started in the lower range at 90, allowed to stabilize, then
rapidly raised or lowered based on the phase comparison.
It gives less phase noise to do this every tick and doesn't seem to hurt anything.
*/
#include "rtimer-arch.h"
{
volatile static uint8_t lockcount;
volatile static int16_t last_phase;
volatile static uint8_t osccalhigh,osccallow;
if (seconds < 60) { //give a minute to stabilize
if(++lockcount >= 8192UL*128/RTIMER_ARCH_SECOND) {
lockcount=0;
rtimer_phase = TCNT3 & 0x0fff;
if (seconds < 2) OSCCAL=100;
if (last_phase > rtimer_phase) osccalhigh=++OSCCAL; else osccallow=--OSCCAL;
last_phase = rtimer_phase;
}
} else {
#if TICK_MODULO
static uint8_t lock_clock;
if (++lock_clock>=TICK_MODULO) {
lock_clock=0;
#endif
uint8_t error = (TCNT3 - last_phase) & 0x3f;
if (error == 0) {
} else if (error<32) {
OSCCAL=osccallow-1;
} else {
OSCCAL=osccalhigh+1;
}
#if TICK_MODULO
}
#endif
}
}
#endif
2011-08-13 17:38:38 +02:00
#if RADIO_CONF_CALIBRATE_INTERVAL
if (++calibrate_interval==0) {
rf230_calibrate=1;
2009-04-06 15:08:42 +02:00
}
#endif
#if RADIOSTATS
if (RF230_receive_on) {
if (++rcount >= CLOCK_SECOND) {
rcount=0;
radioontime++;
}
}
#endif
#if 1
/* gcc will save all registers on the stack if an external routine is called */
if(etimer_pending()) {
etimer_request_poll();
}
#else
/* doing this locally saves 9 pushes and 9 pops, but these etimer.c and process.c variables have to lose the static qualifier */
extern struct etimer *timerlist;
extern volatile unsigned char poll_requested;
#define PROCESS_STATE_NONE 0
#define PROCESS_STATE_RUNNING 1
#define PROCESS_STATE_CALLED 2
if (timerlist) {
if(etimer_process.state == PROCESS_STATE_RUNNING ||
etimer_process.state == PROCESS_STATE_CALLED) {
etimer_process.needspoll = 1;
poll_requested = 1;
}
}
#endif
}
/*---------------------------------------------------------------------------*/
void
clock_init(void)
{
cli ();
OCRSetup();
//scount = count = 0;
sei ();
}
/*---------------------------------------------------------------------------*/
clock_time_t
clock_time(void)
{
2009-04-06 15:08:42 +02:00
clock_time_t tmp;
do {
tmp = count;
} while(tmp != count);
return tmp;
}
#if 0
/*---------------------------------------------------------------------------*/
/**
* Delay the CPU for a multiple of TODO
*/
void
clock_delay(unsigned int i)
{
for (; i > 0; i--) { /* Needs fixing XXX */
unsigned j;
for (j = 50; j > 0; j--)
asm volatile("nop");
}
}
/*---------------------------------------------------------------------------*/
/**
* Wait for a number of clock ticks.
*
*/
void
clock_wait(int i)
{
clock_time_t start;
start = clock_time();
while(clock_time() - start < (clock_time_t)i);
}
/*---------------------------------------------------------------------------*/
void
clock_set_seconds(unsigned long sec)
{
seconds = sec;
}
#endif
unsigned long
clock_seconds(void)
{
2009-04-06 15:08:42 +02:00
unsigned long tmp;
do {
tmp = seconds;
} while(tmp != seconds);
return tmp;
}
#ifdef HANDLE_UNSUPPORTED_INTERRUPTS
/* Ignore unsupported interrupts, optionally hang for debugging */
/* BADISR is a gcc weak symbol that matches any undefined interrupt */
ISR(BADISR_vect) {
//static volatile uint8_t x;while (1) x++;
}
#endif
#ifdef HANG_ON_UNKNOWN_INTERRUPT
/* Hang on any unsupported interrupt */
/* Useful for diagnosing unknown interrupts that reset the mcu.
* Currently set up for 12mega128rfa1.
* For other mcus, enable all and then disable the conflicts.
*/
static volatile uint8_t x;
ISR( _VECTOR(0)) {while (1) x++;}
ISR( _VECTOR(1)) {while (1) x++;}
ISR( _VECTOR(2)) {while (1) x++;}
ISR( _VECTOR(3)) {while (1) x++;}
ISR( _VECTOR(4)) {while (1) x++;}
ISR( _VECTOR(5)) {while (1) x++;}
ISR( _VECTOR(6)) {while (1) x++;}
ISR( _VECTOR(7)) {while (1) x++;}
ISR( _VECTOR(8)) {while (1) x++;}
ISR( _VECTOR(9)) {while (1) x++;}
ISR( _VECTOR(10)) {while (1) x++;}
ISR( _VECTOR(11)) {while (1) x++;}
ISR( _VECTOR(12)) {while (1) x++;}
ISR( _VECTOR(13)) {while (1) x++;}
ISR( _VECTOR(14)) {while (1) x++;}
ISR( _VECTOR(15)) {while (1) x++;}
ISR( _VECTOR(16)) {while (1) x++;}
ISR( _VECTOR(17)) {while (1) x++;}
ISR( _VECTOR(18)) {while (1) x++;}
ISR( _VECTOR(19)) {while (1) x++;}
//ISR( _VECTOR(20)) {while (1) x++;}
//ISR( _VECTOR(21)) {while (1) x++;}
ISR( _VECTOR(22)) {while (1) x++;}
ISR( _VECTOR(23)) {while (1) x++;}
ISR( _VECTOR(24)) {while (1) x++;}
//ISR( _VECTOR(25)) {while (1) x++;}
ISR( _VECTOR(26)) {while (1) x++;}
//ISR( _VECTOR(27)) {while (1) x++;}
ISR( _VECTOR(28)) {while (1) x++;}
ISR( _VECTOR(29)) {while (1) x++;}
ISR( _VECTOR(30)) {while (1) x++;}
ISR( _VECTOR(31)) {while (1) x++;}
//ISR( _VECTOR(32)) {while (1) x++;}
ISR( _VECTOR(33)) {while (1) x++;}
ISR( _VECTOR(34)) {while (1) x++;}
ISR( _VECTOR(35)) {while (1) x++;}
//ISR( _VECTOR(36)) {while (1) x++;}
ISR( _VECTOR(37)) {while (1) x++;}
//ISR( _VECTOR(38)) {while (1) x++;}
ISR( _VECTOR(39)) {while (1) x++;}
ISR( _VECTOR(40)) {while (1) x++;}
ISR( _VECTOR(41)) {while (1) x++;}
ISR( _VECTOR(42)) {while (1) x++;}
ISR( _VECTOR(43)) {while (1) x++;}
ISR( _VECTOR(44)) {while (1) x++;}
ISR( _VECTOR(45)) {while (1) x++;}
ISR( _VECTOR(46)) {while (1) x++;}
ISR( _VECTOR(47)) {while (1) x++;}
ISR( _VECTOR(48)) {while (1) x++;}
ISR( _VECTOR(49)) {while (1) x++;}
ISR( _VECTOR(50)) {while (1) x++;}
ISR( _VECTOR(51)) {while (1) x++;}
ISR( _VECTOR(52)) {while (1) x++;}
ISR( _VECTOR(53)) {while (1) x++;}
ISR( _VECTOR(54)) {while (1) x++;}
ISR( _VECTOR(55)) {while (1) x++;}
ISR( _VECTOR(56)) {while (1) x++;}
//ISR( _VECTOR(57)) {while (1) x++;}
//ISR( _VECTOR(58)) {while (1) x++;}
//ISR( _VECTOR(59)) {while (1) x++;}
//ISR( _VECTOR(60)) {while (1) x++;}
ISR( _VECTOR(61)) {while (1) x++;}
ISR( _VECTOR(62)) {while (1) x++;}
ISR( _VECTOR(63)) {while (1) x++;}
ISR( _VECTOR(64)) {while (1) x++;}
ISR( _VECTOR(65)) {while (1) x++;}
ISR( _VECTOR(66)) {while (1) x++;}
ISR( _VECTOR(67)) {while (1) x++;}
ISR( _VECTOR(68)) {while (1) x++;}
ISR( _VECTOR(69)) {while (1) x++;}
ISR( _VECTOR(70)) {while (1) x++;}
ISR( _VECTOR(71)) {while (1) x++;}
ISR( _VECTOR(72)) {while (1) x++;}
ISR( _VECTOR(73)) {while (1) x++;}
ISR( _VECTOR(74)) {while (1) x++;}
ISR( _VECTOR(75)) {while (1) x++;}
ISR( _VECTOR(76)) {while (1) x++;}
ISR( _VECTOR(77)) {while (1) x++;}
ISR( _VECTOR(78)) {while (1) x++;}
ISR( _VECTOR(79)) {while (1) x++;}
#endif