osd-contiki/cpu/cc26xx/dev/rfc-api/ble_mailbox.h

120 lines
5.8 KiB
C
Raw Normal View History

2015-02-25 13:09:56 +01:00
/******************************************************************************
* Filename: ble_mailbox.h
* Revised: $ $
* Revision: $ $
*
* Description: Definitions for BLE interface
*
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef _BLE_MAILBOX_H
#define _BLE_MAILBOX_H
#include "mailbox.h"
/// \name CPE interrupt definitions for BLE
/// Interrupt masks for the CPE interrupt in RDBELL. These are new names for interrupts in mailbox.h,
/// used for compartibility with previous versions with separate interrupt numbers.
///@{
#define IRQN_BLE_TX_DONE IRQN_TX_DONE
#define IRQN_BLE_TX_ACK IRQN_TX_ACK
#define IRQN_BLE_TX_CTRL IRQN_TX_CTRL
#define IRQN_BLE_TX_CTRL_ACK IRQN_TX_CTRL_ACK
#define IRQN_BLE_TX_CTRL_ACK_ACK IRQN_TX_CTRL_ACK_ACK
#define IRQN_BLE_TX_RETRANS IRQN_TX_RETRANS
#define IRQN_BLE_TX_ENTRY_DONE IRQN_TX_ENTRY_DONE
#define IRQN_BLE_TX_BUFFER_CHANGED IRQN_TX_BUFFER_CHANGED
#define IRQN_BLE_RX_OK IRQN_RX_OK
#define IRQN_BLE_RX_NOK IRQN_RX_NOK
#define IRQN_BLE_RX_IGNORED IRQN_RX_IGNORED
#define IRQN_BLE_RX_EMPTY IRQN_RX_EMPTY
#define IRQN_BLE_RX_CTRL IRQN_RX_CTRL
#define IRQN_BLE_RX_CTRL_ACK IRQN_RX_CTRL_ACK
#define IRQN_BLE_RX_BUF_FULL IRQN_RX_BUF_FULL
#define IRQN_BLE_RX_ENTRY_DONE IRQN_RX_ENTRY_DONE
#define IRQ_BLE_TX_DONE (1U << IRQN_BLE_TX_DONE)
#define IRQ_BLE_TX_ACK (1U << IRQN_BLE_TX_ACK)
#define IRQ_BLE_TX_CTRL (1U << IRQN_BLE_TX_CTRL)
#define IRQ_BLE_TX_CTRL_ACK (1U << IRQN_BLE_TX_CTRL_ACK)
#define IRQ_BLE_TX_CTRL_ACK_ACK (1U << IRQN_BLE_TX_CTRL_ACK_ACK)
#define IRQ_BLE_TX_RETRANS (1U << IRQN_BLE_TX_RETRANS)
#define IRQ_BLE_TX_ENTRY_DONE (1U << IRQN_BLE_TX_ENTRY_DONE)
#define IRQ_BLE_TX_BUFFER_CHANGED (1U << IRQN_BLE_TX_BUFFER_CHANGED)
#define IRQ_BLE_RX_OK (1U << IRQN_BLE_RX_OK)
#define IRQ_BLE_RX_NOK (1U << IRQN_BLE_RX_NOK)
#define IRQ_BLE_RX_IGNORED (1U << IRQN_BLE_RX_IGNORED)
#define IRQ_BLE_RX_EMPTY (1U << IRQN_BLE_RX_EMPTY)
#define IRQ_BLE_RX_CTRL (1U << IRQN_BLE_RX_CTRL)
#define IRQ_BLE_RX_CTRL_ACK (1U << IRQN_BLE_RX_CTRL_ACK)
#define IRQ_BLE_RX_BUF_FULL (1U << IRQN_BLE_RX_BUF_FULL)
#define IRQ_BLE_RX_ENTRY_DONE (1U << IRQN_BLE_RX_ENTRY_DONE)
///@}
/// \name Radio operation status
/// Radio operation status format:
/// Bits 15:12: Protocol
/// 0001: BLE
/// Bits 11:10: Type
/// 00: Not finished
/// 01: Done successfully
/// 10: Done with error
/// Bits 9:0: Identifier
/// \name Operation finished normally
///@{
#define BLE_DONE_OK 0x1400 ///< Operation ended normally
#define BLE_DONE_RXTIMEOUT 0x1401 ///< Timeout of first Rx of slave operation or end of scan window
#define BLE_DONE_NOSYNC 0x1402 ///< Timeout of subsequent Rx
#define BLE_DONE_RXERR 0x1403 ///< Operation ended because of receive error (CRC or other)
#define BLE_DONE_CONNECT 0x1404 ///< CONNECT_REQ received or transmitted
#define BLE_DONE_MAXNACK 0x1405 ///< Maximum number of retransmissions exceeded
#define BLE_DONE_ENDED 0x1406 ///< Operation stopped after end trigger
#define BLE_DONE_ABORT 0x1407 ///< Operation aborted by command
#define BLE_DONE_STOPPED 0x1408 ///< Operation stopped after stop command
///@}
/// \name Operation finished with error
///@{
#define BLE_ERROR_PAR 0x1800 ///< Illegal parameter
#define BLE_ERROR_RXBUF 0x1801 ///< No available Rx buffer (Advertiser, Scanner, Initiator)
#define BLE_ERROR_NO_SETUP 0x1802 ///< Operation using Rx or Tx attemted when not in BLE mode
#define BLE_ERROR_NO_FS 0x1803 ///< Operation using Rx or Tx attemted without frequency synth configured
#define BLE_ERROR_SYNTH_PROG 0x1804 ///< Synthesizer programming failed to complete on time
#define BLE_ERROR_RXOVF 0x1805 ///< Receiver overflowed during operation
#define BLE_ERROR_TXUNF 0x1806 ///< Transmitter underflowed during operation
///@}
///@}
#endif