osd-contiki/examples/osd/arduino-windsonic/README.md

27 lines
915 B
Markdown
Raw Normal View History

2017-08-08 14:36:44 +02:00
Access to Gill Windsonic Anemometer
===================================
We use the second serial port to receive data from the Gill Windsonic
ultrasonic anemometer:
http://gillinstruments.com/products/anemometer/windsonic.htm
The Windsonic needs to be set up properly to send data periodically
(every two seconds in my setup) in the Polar Format with fixed CSV
sizes at 9600 baud.
I used a MAX3323EEPE to translate the RS232 from Windsonic to Merkurboard
3.3V levels.
The complete setup is driven by a 12V solar charged acid battery. The
/power_supply ressource measures the voltage level on the input.
The voltage is measured by a simple 1M/100k voltage divider directly
connected to the merkurboard.
A small DC/DC converter is used to power the merkurboard.
Next step maybe put the merkurboard and MAX3323 in the Windsonic's case
to have the first open source ipv6 addressable windsonic on earth ;-)