deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
osd-contiki/examples/osd/arduino-sketch/Makefile

59 lines
1.5 KiB
Makefile
Raw Normal View History

Add Arduino compatibility layer We can now directly compile arduino sketches (.pde) files. Arduino compatible analogWrite works now. But there is still a long way to go, serial I/O and timer stuff (delay, millis etc) currently don't work (not tested but I don't expect this to work). It can be used in an arduino sketch or in a normal contiki program. We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's Arduino compatible. If you need different frequencies see native timer usage in examples/osd/pwm-example In a contiki program you have to call arduino_pwm_timer_init to initialize the timer before pwm works. The arduino sketch wrapper already does this. For running a sketch, see examples/osd/arduino-sketch
2014-06-26 11:00:01 +02:00
# Set this to the name of your sketch (without extension .pde)
SKETCH=sketch
Multi-platform support, osd-merkur-{128,256} Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework *all* osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:51:59 +02:00
EXE=arduino-example
Add Arduino compatibility layer We can now directly compile arduino sketches (.pde) files. Arduino compatible analogWrite works now. But there is still a long way to go, serial I/O and timer stuff (delay, millis etc) currently don't work (not tested but I don't expect this to work). It can be used in an arduino sketch or in a normal contiki program. We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's Arduino compatible. If you need different frequencies see native timer usage in examples/osd/pwm-example In a contiki program you have to call arduino_pwm_timer_init to initialize the timer before pwm works. The arduino sketch wrapper already does this. For running a sketch, see examples/osd/arduino-sketch
2014-06-26 11:00:01 +02:00
Multi-platform support, osd-merkur-{128,256} Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework *all* osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:51:59 +02:00
all: $(EXE)
Add Arduino compatibility layer We can now directly compile arduino sketches (.pde) files. Arduino compatible analogWrite works now. But there is still a long way to go, serial I/O and timer stuff (delay, millis etc) currently don't work (not tested but I don't expect this to work). It can be used in an arduino sketch or in a normal contiki program. We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's Arduino compatible. If you need different frequencies see native timer usage in examples/osd/pwm-example In a contiki program you have to call arduino_pwm_timer_init to initialize the timer before pwm works. The arduino sketch wrapper already does this. For running a sketch, see examples/osd/arduino-sketch
2014-06-26 11:00:01 +02:00
CONTIKI=../../..
Factor/Fix generic resources Now the old GENERIC_RESOURCE macros works again (but usage has changed). Common resources (battery, leds, radio) are now in resources-common.
2015-01-21 15:09:31 +01:00
# Contiki IPv6 configuration
CONTIKI_WITH_IPV6 = 1
Add Arduino compatibility layer We can now directly compile arduino sketches (.pde) files. Arduino compatible analogWrite works now. But there is still a long way to go, serial I/O and timer stuff (delay, millis etc) currently don't work (not tested but I don't expect this to work). It can be used in an arduino sketch or in a normal contiki program. We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's Arduino compatible. If you need different frequencies see native timer usage in examples/osd/pwm-example In a contiki program you have to call arduino_pwm_timer_init to initialize the timer before pwm works. The arduino sketch wrapper already does this. For running a sketch, see examples/osd/arduino-sketch
2014-06-26 11:00:01 +02:00
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
PROJECT_SOURCEFILES += resource_led_pwm.c ${SKETCH}.cpp
# variable for Makefile.include
ifneq ($(TARGET), minimal-net)
CFLAGS += -DUIP_CONF_IPV6_RPL=1
else
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
${info INFO: compiling without RPL}
CFLAGS += -DUIP_CONF_IPV6_RPL=0
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
endif
# linker optimizations
SMALL=1
Factor/Fix generic resources Now the old GENERIC_RESOURCE macros works again (but usage has changed). Common resources (battery, leds, radio) are now in resources-common.
2015-01-21 15:09:31 +01:00
# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
APPS += time json arduino json-resource
Add Arduino compatibility layer We can now directly compile arduino sketches (.pde) files. Arduino compatible analogWrite works now. But there is still a long way to go, serial I/O and timer stuff (delay, millis etc) currently don't work (not tested but I don't expect this to work). It can be used in an arduino sketch or in a normal contiki program. We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's Arduino compatible. If you need different frequencies see native timer usage in examples/osd/pwm-example In a contiki program you have to call arduino_pwm_timer_init to initialize the timer before pwm works. The arduino sketch wrapper already does this. For running a sketch, see examples/osd/arduino-sketch
2014-06-26 11:00:01 +02:00
include $(CONTIKI)/Makefile.include
include $(CONTIKI)/apps/arduino/Makefile.include
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
connect-minimal:
sudo ip address add fdfd::1/64 dev tap0
Multi-platform support, osd-merkur-{128,256} Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework *all* osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed.
2016-04-22 17:51:59 +02:00
avr-size: $(EXE).$(TARGET).sz
flash: $(EXE).$(TARGET).u $(EXE).$(TARGET).eu
.PHONY: flash avr-size
.PRECIOUS: $(EXE).$(TARGET).hex $(EXE).$(TARGET).eep
Reference in a new issue Copy permalink