osd-contiki/platform/zoul/dev/adc-sensors.c

232 lines
7.1 KiB
C
Raw Normal View History

/*
* Copyright (c) 2016, Zolertia - http://www.zolertia.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup zoul-adc-sensors
* @{
*
* \file
* Generic driver for the Zoul ADC wrapper for analogue sensors
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "sys/clock.h"
#include "dev/ioc.h"
#include "dev/gpio.h"
#include "dev/adc.h"
#include "adc-sensors.h"
#include "adc-zoul.h"
#include "zoul-sensors.h"
#include <stdio.h>
#include <stdint.h>
/*---------------------------------------------------------------------------*/
#define DEBUG 0
#if DEBUG
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
typedef struct {
int type;
uint8_t pin_mask;
uint8_t vdd3;
} adc_info_t;
typedef struct {
uint8_t sensors_num;
uint8_t sensors_ports;
adc_info_t sensor[ADC_SENSORS_MAX];
} adc_wrapper_t;
static adc_wrapper_t sensors;
/*---------------------------------------------------------------------------*/
static uint16_t
convert_to_value(uint8_t index)
{
uint32_t value;
value = adc_zoul.value(sensors.sensor[index].pin_mask);
if(value == ZOUL_SENSORS_ERROR) {
PRINTF("ADC sensors: failed retrieving data\n");
return ADC_WRAPPER_ERROR;
}
/* Default voltage divisor relation is 5/3 aprox, change at adc_wrapper.h,
* calculations below assume a decimation rate of 512 (12 bits ENOB) and
* AVVD5 voltage reference of 3.3V
*/
if(!sensors.sensor[index].vdd3) {
value *= ADC_WRAPPER_EXTERNAL_VREF;
value /= ADC_WRAPPER_EXTERNAL_VREF_CROSSVAL;
}
switch(sensors.sensor[index].type) {
case ANALOG_GROVE_LIGHT:
/* Light dependant resistor (LDR) resistance value*/
value = (10230 - (value * 10)) / value;
/* TODO: With the resistance we could calculate the lux as 63*R^(-0.7) */
return (uint16_t)value;
case ANALOG_GROVE_LOUDNESS:
/* Based on the LM2904 amplifier (blue version with potentiometer) */
return (uint16_t)value;
case ANALOG_PHIDGET_ROTATION_1109:
/* Linear sensor with 0-300º, 300/33000 = 0.00909 */
value *= 909;
value /= 100000;
return (uint16_t)value;
/* VDD+5 sensors */
case ANALOG_VAC_SENSOR:
/* Linear sensor from 0 to 5 V; 0.0088 resolution*/
value *= 88;
value /= 10000;
return (uint16_t)value;
case ANALOG_AAC_SENSOR:
/* Linear sensor from 0 to 5 V;*/
return (uint16_t)value;
default:
return ADC_WRAPPER_ERROR;
}
return ADC_WRAPPER_ERROR;
}
/*---------------------------------------------------------------------------*/
static uint8_t
is_sensor_in_list(int type)
{
uint8_t i;
for(i = 0; i <= sensors.sensors_num; i++) {
if(sensors.sensor[i].type == type) {
return i + 1;
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
uint8_t index;
uint16_t sensor_value;
index = is_sensor_in_list(type);
if(!index) {
PRINTF("ADC sensors: sensor not registered\n");
return ADC_WRAPPER_SUCCESS;
}
/* Restore index value after the check */
index -= 1;
sensor_value = convert_to_value(index);
return sensor_value;
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
uint8_t pin_mask = GPIO_PIN_MASK(value);
if((type != ANALOG_GROVE_LIGHT) && (type != ANALOG_PHIDGET_ROTATION_1109) &&
(type != ANALOG_GROVE_LOUDNESS) && (type != ANALOG_VAC_SENSOR) &&
(type != ANALOG_AAC_SENSOR) ) {
PRINTF("ADC sensors: sensor not supported, check adc_wrapper.h header\n");
return ADC_WRAPPER_ERROR;
}
if(sensors.sensors_num >= ADC_SENSORS_MAX) {
PRINTF("ADC sensors: all adc channels available have been assigned\n");
return ADC_WRAPPER_ERROR;
}
if((value < 0x01) || (value > 0x07) || ((value == BUTTON_USER_PIN) && (ADC_SENSORS_ADC6_PIN < 0))) {
PRINTF("ADC sensors: invalid pin value, (PA0-PA1, PA3) are reserved\n");
return ADC_WRAPPER_ERROR;
}
if(sensors.sensors_ports & pin_mask) {
PRINTF("ADC sensors: a sensor has been already assigned to this pin\n");
return ADC_WRAPPER_ERROR;
}
switch(type) {
/* V+3.3 sensors */
case ANALOG_GROVE_LIGHT:
case ANALOG_GROVE_LOUDNESS:
case ANALOG_PHIDGET_ROTATION_1109:
if(adc_zoul.configure(SENSORS_HW_INIT, pin_mask) == ZOUL_SENSORS_ERROR) {
return ADC_WRAPPER_ERROR;
}
sensors.sensor[sensors.sensors_num].type = type;
sensors.sensor[sensors.sensors_num].pin_mask = pin_mask;
sensors.sensor[sensors.sensors_num].vdd3 = 1;
break;
/*V+5 sensors*/
case ANALOG_VAC_SENSOR:
case ANALOG_AAC_SENSOR:
if(adc_zoul.configure(SENSORS_HW_INIT, pin_mask) == ZOUL_SENSORS_ERROR) {
return ADC_WRAPPER_ERROR;
}
sensors.sensor[sensors.sensors_num].type = type;
sensors.sensor[sensors.sensors_num].pin_mask = pin_mask;
sensors.sensor[sensors.sensors_num].vdd3 = 0;
break;
default:
return ADC_WRAPPER_ERROR;
}
PRINTF("ADC sensors: type %u mask 0x%02X vdd3 %u\n",
sensors.sensor[sensors.sensors_num].type,
sensors.sensor[sensors.sensors_num].pin_mask,
sensors.sensor[sensors.sensors_num].vdd3);
sensors.sensors_num++;
sensors.sensors_ports |= pin_mask;
return ADC_WRAPPER_SUCCESS;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(adc_sensors, ADC_SENSORS, value, configure, NULL);
/*---------------------------------------------------------------------------*/
/** @} */