59 lines
3 KiB
Markdown
59 lines
3 KiB
Markdown
|
This is a library for the Adafruit BME280 Humidity, Barometric Pressure + Temp sensor
|
||
|
|
|
||
|
|
Designed specifically to work with the Adafruit BME280 Breakout
|
||
|
|
* http://www.adafruit.com/products/2652
|
||
|
|
|
||
|
|
These sensors use I2C or SPI to communicate, up to 4 pins are required to interface
|
||
|
|
|
||
|
|
Use of this library also requires [Adafruit_Sensor](https://github.com/adafruit/Adafruit_Sensor)
|
||
|
|
to be installed on your local system.
|
||
|
|
|
||
|
|
Adafruit invests time and resources providing this open source code,
|
||
|
|
please support Adafruit and open-source hardware by purchasing
|
||
|
|
products from Adafruit!
|
||
|
|
|
||
|
|
Check out the links above for our tutorials and wiring diagrams
|
||
|
|
|
||
|
|
Written by Limor Fried/Ladyada for Adafruit Industries.
|
||
|
|
BSD license, all text above must be included in any redistribution
|
||
|
|
|
||
|
|
To download. click the DOWNLOAD ZIP button, rename the uncompressed folder Adafruit_BME280.
|
||
|
|
Check that the Adafruit_BME280 folder contains Adafruit_BME280.cpp and Adafruit_BME280.h
|
||
|
|
|
||
|
|
Place the Adafruit_BME280 library folder your arduinosketchfolder/libraries/ folder.
|
||
|
|
You may need to create the libraries subfolder if its your first library. Restart the IDE.
|
||
|
|
|
||
|
|
We also have a great tutorial on Arduino library installation at:
|
||
|
|
http://learn.adafruit.com/adafruit-all-about-arduino-libraries-install-use
|
||
|
|
<!-- START COMPATIBILITY TABLE -->
|
||
|
|
|
||
|
|
## Compatibility
|
||
|
|
|
||
|
|
MCU | Tested Works | Doesn't Work | Not Tested | Notes
|
||
|
|
------------------ | :----------: | :----------: | :---------: | -----
|
||
|
|
Atmega328 @ 16MHz | X | | |
|
||
|
|
Atmega328 @ 12MHz | X | | |
|
||
|
|
Atmega32u4 @ 16MHz | X | | | Use SDA/SCL on pins D2 & D3
|
||
|
|
Atmega32u4 @ 8MHz | X | | | Use SDA/SCL on pins D2 & D3
|
||
|
|
ESP8266 | X | | | SDA/SCL default to pins 4 & 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL)
|
||
|
|
Atmega2560 @ 16MHz | X | | | Use SDA/SCL on pins 20 & 21
|
||
|
|
ATSAM3X8E | X | | | Use SDA/SCL on pins 20 & 21
|
||
|
|
ATSAM21D | X | | |
|
||
|
|
ATtiny85 @ 16MHz | | X | |
|
||
|
|
ATtiny85 @ 8MHz | | X | |
|
||
|
|
Intel Curie @ 32MHz | | | X |
|
||
|
|
STM32F2 | | | X |
|
||
|
|
|
||
|
|
* ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
|
||
|
|
* ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
|
||
|
|
* ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
|
||
|
|
* ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
|
||
|
|
* ESP8266 : Adafruit Huzzah
|
||
|
|
* ATmega2560 @ 16MHz : Arduino Mega
|
||
|
|
* ATSAM3X8E : Arduino Due
|
||
|
|
* ATSAM21D : Arduino Zero, M0 Pro
|
||
|
|
* ATtiny85 @ 16MHz : Adafruit Trinket 5V
|
||
|
|
* ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V
|
||
|
|
|
||
|
|
<!-- END COMPATIBILITY TABLE -->
|