osd-contiki/cpu/arm/aducrf101/Common/GCC/crt0.S

174 lines
5.3 KiB
ArmAsm
Raw Permalink Normal View History

2014-06-22 04:35:42 +02:00
/**
* Copyright (c) 2014, Analog Devices, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted (subject to the limitations in the
* disclaimer below) provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* - Neither the name of Analog Devices, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
* GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
* HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
.equ SCB_VTOR, 0xE000ED08
/* Vector table */
.macro handler name
.long \name\()
.weak \name\()
.set \name\(), unhandled_vector
.endm
.macro handler_reserved
.long 0
.endm
.section .vectors, "a", %progbits
vectors:
.long stack_end
.long Reset_Handler
/* Cortex-M3 core interrupts */
handler NMI_Handler
handler HardFault_Handler
handler MemManage_Handler
handler BusFault_Handler
handler UsageFault_Handler
handler_reserved
handler_reserved
handler_reserved
handler_reserved
handler SVC_Handler
handler DebugMon_Handler
handler_reserved
handler PendSV_Handler
handler SysTick_Handler
/* ADuCRF101 external interrupts */
handler WakeUp_Int_Handler
handler Ext_Int0_Handler
handler Ext_Int1_Handler
handler Ext_Int2_Handler
handler Ext_Int3_Handler
handler Ext_Int4_Handler
handler Ext_Int5_Handler
handler Ext_Int6_Handler
handler Ext_Int7_Handler
handler Ext_Int8_Handler
handler WDog_Tmr_Int_Handler
handler_reserved
handler GP_Tmr0_Int_Handler
handler GP_Tmr1_Int_Handler
handler ADC0_Int_Handler
handler Flsh_Int_Handler
handler UART_Int_Handler
handler SPI0_Int_Handler
handler SPI1_Int_Handler
handler I2C0_Slave_Int_Handler
handler I2C0_Master_Int_Handler
handler_reserved
handler_reserved
handler DMA_Err_Int_Handler
handler DMA_SPI1_TX_Int_Handler
handler DMA_SPI1_RX_Int_Handler
handler DMA_UART_TX_Int_Handler
handler DMA_UART_RX_Int_Handler
handler DMA_I2C0_STX_Int_Handler
handler DMA_I2C0_SRX_Int_Handler
handler DMA_I2C0_MTX_Int_Handler
handler DMA_I2C0_MRX_Int_Handler
handler_reserved
handler_reserved
handler_reserved
handler DMA_ADC_Int_Handler
handler DMA_SPI0_TX_Int_Handler
handler DMA_SPI0_RX_Int_Handler
handler PWMTrip_Int_Handler
handler PWM0_Int_Handler
handler PWM1_Int_Handler
handler PWM2_Int_Handler
handler PWM3_Int_Handler
/* Reset handler */
.section .text
.syntax unified
.code 16
.global Reset_Handler
.thumb_func
Reset_Handler:
/* Set up some basics, in case we came here from a call
rather than system reset. */
/* Disable interrupts */
cpsid i
/* Privileged mode, main stack, no floating point */
mov r0, #0
msr control, r0
isb
/* Point vector table to the right place */
ldr r0, =__vectors_start
ldr r1, =SCB_VTOR
str r0, [r1]
/* Load initial stack pointer */
ldr r0, =stack_end
mov sp, r0
isb
/* Clear BSS */
mov r0, #0
ldr r1, =__bss_start
ldr r2, =__bss_end
zero_bss_loop:
cmp r1, r2
it lt
strlt r0, [r1], #4
blt zero_bss_loop
/* Copy initialized data from flash to RAM */
ldr r0, =__data_flash_start
ldr r1, =__data_start
ldr r2, =__data_end
copy_data_loop:
ldr r3, [r0], #4
cmp r1, r2
it lt
strlt r3, [r1], #4
blt copy_data_loop
/* We can run C code now */
bl main
/* If main returned, just loop */
b .
/* Handler for otherwise unhandled vectors */
.section .text,"ax",%progbits
.thumb_func
unhandled_vector:
b unhandled_vector