osd-contiki/platform/stm32nucleo-spirit1/Makefile.stm32nucleo-spirit1

247 lines
7.5 KiB
Makefile
Raw Permalink Normal View History

2015-07-24 16:30:10 +02:00
CONTIKI_TARGET_DIRS = .
ifeq ($(BOARD),)
BOARD=ids01a4
${info ***************************************************}
${info BOARD not specified, default to ids01a4 (868 MHz)!}
${info ***************************************************}
else ifeq ($(BOARD),ids01a4)
${info ***************************************************}
${info Using ids01a4 SPIRIT1 expansion board (868 MHz)}
${info ***************************************************}
else ifeq ($(BOARD),ids01a5)
${info ***************************************************}
${info Using ids01a5 SPIRIT1 expansion board (915 MHz)}
${info ***************************************************}
2015-07-24 16:30:10 +02:00
else
${info ***************************************************}
${info You must specify a valid SPIRIT1 board to use:}
${info make BOARD=ids01a4 for X-NUCLEO-IDS01A4 (868 MHz)}
${info make BOARD=ids01a5 for X-NUCLEO-IDS01A5 (915 MHz)}
${info ***************************************************}
${error }
2015-07-24 16:30:10 +02:00
endif
### Include the board-specific makefile
PLATFORM_ROOT_DIR = $(CONTIKI)/platform/$(TARGET)
-include $(PLATFORM_ROOT_DIR)/Makefile.$(BOARD)
2015-07-24 16:30:10 +02:00
ifeq ($(SENSORBOARD),iks01a1)
${info Compiling with X-NUCLEO-IKS01A1 sensors files}
${info ***************************************************}
-include $(PLATFORM_ROOT_DIR)/Makefile.$(SENSORBOARD)
else ifeq ($(SENSORBOARD),)
${info NOT compiling files for any sensors expansion board}
${info ***************************************************}
2015-07-24 16:30:10 +02:00
else
${info Error: SENSORBOARD can be: iks01a1}
${info ***************************************************}
2015-07-24 16:30:10 +02:00
${error }
endif
2015-07-24 16:30:10 +02:00
#Currently we support only GCC
GCC=1
CONTIKI_TARGET_DIRS += dev
CONTIKI_TARGET_DIRS += stm32cube-lib/stm32cube-prj/Src
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/stm32l1xx_nucleo
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/x_nucleo_ids01ax
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/Common
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/spirit1/src stm32cube-lib/drivers/spirit1/inc
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/CMSIS
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/STM32L1xx_HAL_Driver
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/STM32L1xx_HAL_Driver/Src
CONTIKI_TARGET_DIRS += stm32cube-lib/drivers/STM32L1xx_HAL_Driver/Inc
2015-07-24 16:30:10 +02:00
2015-09-07 19:59:03 +02:00
ARCH_DEV = button-sensor.c leds-arch.c radio-sensor.c
2015-07-24 16:30:10 +02:00
ARCH_NUCLEOSPIRIT1 = contiki-spirit1-main.c uart-msg.c spirit1-arch.c spirit1.c node-id.c
ARCH_NUCLEOSPIRIT1_STM32CUBEHAL = spirit1_appli.c stm32l1xx_hal_msp.c stm32l1xx_it.c stm32cube_hal_init.c
ARCH_DRIVERS_STM32L1xx = stm32l1xx_nucleo.c
ARCH_DRIVERS_IDS01AX = radio_gpio.c radio_shield_config.c radio_spi.c
ARCH_DRIVERS_SPIRIT1 = \
SPIRIT1_Util.c \
SPIRIT_Aes.c \
SPIRIT_Calibration.c \
SPIRIT_Commands.c \
SPIRIT_Csma.c \
SPIRIT_DirectRF.c \
SPIRIT_General.c \
SPIRIT_Gpio.c \
SPIRIT_Irq.c \
SPIRIT_LinearFifo.c \
SPIRIT_Management.c \
SPIRIT_PktBasic.c \
SPIRIT_PktCommon.c \
SPIRIT_PktMbus.c \
SPIRIT_PktStack.c \
SPIRIT_Qi.c \
SPIRIT_Radio.c \
SPIRIT_Timer.c \
SPIRIT_Types.c
STM32L1XX_HAL =\
stm32l1xx_hal.c\
stm32l1xx_hal_adc_ex.c\
stm32l1xx_hal_adc.c\
stm32l1xx_hal_comp.c\
stm32l1xx_hal_cortex.c\
stm32l1xx_hal_crc.c\
stm32l1xx_hal_cryp_ex.c\
stm32l1xx_hal_cryp.c\
stm32l1xx_hal_dac_ex.c\
stm32l1xx_hal_dac.c\
stm32l1xx_hal_dma.c\
stm32l1xx_hal_flash_ex.c\
stm32l1xx_hal_flash.c\
stm32l1xx_hal_flash_ramfunc.c\
stm32l1xx_hal_gpio.c\
stm32l1xx_hal_i2c.c\
stm32l1xx_hal_i2s.c\
stm32l1xx_hal_irda.c\
stm32l1xx_hal_iwdg.c\
stm32l1xx_hal_lcd.c\
stm32l1xx_hal_nor.c\
stm32l1xx_hal_opamp_ex.c\
stm32l1xx_hal_opamp.c\
stm32l1xx_hal_pcd_ex.c\
stm32l1xx_hal_pcd.c\
stm32l1xx_hal_pwr_ex.c\
stm32l1xx_hal_pwr.c\
stm32l1xx_hal_rcc_ex.c\
stm32l1xx_hal_rcc.c\
stm32l1xx_hal_rtc_ex.c\
stm32l1xx_hal_rtc.c\
stm32l1xx_hal_sd.c\
stm32l1xx_hal_smartcard.c\
stm32l1xx_hal_spi_ex.c\
stm32l1xx_hal_spi.c\
stm32l1xx_hal_sram.c\
stm32l1xx_hal_tim_ex.c\
stm32l1xx_hal_tim.c\
stm32l1xx_hal_uart.c\
stm32l1xx_hal_usart.c\
stm32l1xx_hal_wwdg.c\
stm32l1xx_ll_fsmc.c\
stm32l1xx_ll_sdmmc.c
2015-07-24 16:30:10 +02:00
ARCH+=$(ARCH_DEV)
ARCH+=$(ARCH_NUCLEOSPIRIT1)
ARCH+=$(ARCH_NUCLEOSPIRIT1_STM32CUBEHAL)
ARCH+=$(ARCH_DRIVERS_STM32L1xx)
ARCH+=$(ARCH_DRIVERS_IDS01AX)
ARCH+=$(ARCH_DRIVERS_SPIRIT1)
ARCH+=$(STM32L1XX_HAL)
2015-07-24 16:30:10 +02:00
CFLAGS += -DUSE_STM32L152_EVAL \
-DSTM32L152xE \
-DUSE_STM32L1XX_NUCLEO \
-DUSE_HAL_DRIVER \
-DUSE_STDPERIPH_DRIVER \
-DNO_EEPROM \
-DSPIRIT1_ST_SHIELD \
-DSPIRIT_MODULE \
-DUSE_SPIRIT1_DEFAULT
CFLAGS += -I. \
-I$(CONTIKI)/platform/$(TARGET)/ \
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/stm32cube-prj/Inc \
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/Common \
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/spirit1/inc \
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/CMSIS \
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-lib/drivers/STM32L1xx_HAL_Driver/Inc \
2015-07-24 16:30:10 +02:00
-I$(CONTIKI)/cpu/arm/stm32l152 \
-I$(CONTIKI)/core \
-I$(CONTIKI)/platform/$(TARGET)/dev
ifdef UIP_CONF_IPV6
CFLAGS += -DWITH_UIP6=1
endif
ifndef CONTIKI_TARGET_MAIN
CONTIKI_TARGET_MAIN = contiki-spirit1-main.c
endif
CONTIKI_TARGET_SOURCEFILES += $(ARCH) $(CONTIKI_TARGET_MAIN)
MCU=stm32l152
CONTIKI_CPU=$(CONTIKI)/cpu/arm/stm32l152
include $(CONTIKI)/cpu/arm/stm32l152/Makefile.stm32l152
MODULES+=core/net \
core/net/mac core/net/mac/contikimac \
core/net/llsec
# build rules ------------------------------------
CLEAN += *.stm32nucleo-spirit1 symbols.c symbols.h contiki-stm32nucleo-spirit1.log
contiki-$(TARGET).a: ${addprefix $(OBJECTDIR)/,symbols.o}
help:
@echo A few useful make commands:
@echo make help - shows this help
@echo make TARGET=stm32nucleo-spirit1 savetarget - stores selection of target to avoid using TARGET= on every make invokation
@echo make program.upload - compiles and uploads program to connected board
@echo make program.upload IAR=1 - uses the IAR compiler instead of gcc (not implemented yet)
@echo make program.upload NODEID=x - uploads with node_id set to x
# Serialdump rules
ifeq ($(HOST_OS),Windows)
SERIALDUMP = serialdump-windows
# this ID is a string with which the node identifies itself as, and is used to
# find the proper /dev/comX-port in Cygwin to connect to.
CYGWIN_DEV_ID="stm32nucleo-spirit1 Spirit1 Platform"
# include $(CONTIKI)/tools/cygwin/Makefile.cygwin
endif
ifeq ($(HOST_OS),Darwin)
SERIALDUMP = serialdump-macos
endif
ifndef SERIALDUMP
# Assume Linux
SERIALDUMP = serialdump-linux
endif
# IAR/windows/cygwin only for now; after GCC port, see if stm32flash works with Linux
STLINKCLI=ST-LINK_CLI.exe
%.upload: %.hex
#Note: this command only uploads to a single connected device
#$(STLINKCLI) -ME || $(STLINKCLI) -ME || $(STLINKCLI) -ME || $(STLINKCLI) -ME
$(STLINKCLI) -Q -P $*.hex -V -Run
# devcon requires WinDriverKit, downloadable from microsoft.com
DEVCON=devcon.exe
DEVCON_ALLDEVS=$(shell $(DEVCON) find =USB | grep "STMicroelectronics STLink dongle" | cut -d " " -f 1)
devcon_enableonly:
devcon disable =USB @"USB\VID_0483&PID_3748\*"
devcon enable =USB @"$(ID)"
%.uploadall: %.hex
$(foreach D,$(DEVCON_ALLDEVS), echo D IS "$(D)" && make devcon_enableonly ID="$(D)" && make $*.upload && ) echo "Done"
devcon enable =USB @"USB\VID_0483&PID_3748\*"
login:
@echo "Connecting to $(COMPORT)"
$(CONTIKI)/tools/sky/$(SERIALDUMP) -b115200 $(COMPORT)
%.ramusage: %.$(TARGET)
$(NM) -S $< --size-sort --line-numbers | grep -v " T " | grep -v " t "
%.romusage: %.$(TARGET)
$(NM) -S $< --size-sort --line-numbers | grep -v " b " | grep -v " B " | grep -v " d " | grep -v " D "