osd-contiki/examples/osd/powerbox/run.sh

#!/bin/bash
# For the ages-old bootloader (before 2014) you want to use
# BOOTLOADER_GET_MAC=0x0001f3a0 as parameter to make below.
make clean TARGET=osd-merkur-128
make TARGET=osd-merkur-128
initial upload 2013-11-22 16:34:13 +01:00			`#!/bin/bash`
Fix run.sh scripts to use jumptable of bootloader Otherwise a crash results with a bootloader compiled with a newer AVR toolchain (e.g. Debian Jessie). If you still have an ages-old bootloader without a jump-table, as a short-term measure you can revert this change in your run.sh. As a long-term fix we recommend you get your bootloader updated! 2016-02-19 17:32:09 +01:00			`# For the ages-old bootloader (before 2014) you want to use`
			`# BOOTLOADER_GET_MAC=0x0001f3a0 as parameter to make below.`
Multi-platform support, osd-merkur-{128,256} Rename guhRF platform to osd-merkur-256, previous osd-merkur platform is now osd-merkur-128. Also check that everything is consistent. Add both platforms to the regression tests. Move redundant files in platform dev directory of both platforms to cpu/avr/dev. Note that this probably needs some rework. Already discovered some inconsistency in io definitions of both devices in the avr/io.h includes. Added a workaround in the obvious cases. The platform makefiles now set correct parameters for bootloader and for reading mac-address from flash memory. Factor the flash programming into cpu/avr and platform/osd-merkur* and rework all osd example makefiles to use the new settings. Also update all the flash.sh and run.sh to use the new settings. The suli ledstrip modules (and osd example) have also been removed. 2016-04-22 17:51:59 +02:00			`make clean TARGET=osd-merkur-128`
			`make TARGET=osd-merkur-128`