osd-contiki/cpu/cc26xx-cc13xx/rf-core/smartrf-settings.c

206 lines
6.7 KiB
C
Raw Permalink Normal View History

/*
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
#include "rf-core/api/mailbox.h"
#include "rf-core/api/common_cmd.h"
#include "rf-core/api/prop_cmd.h"
/*---------------------------------------------------------------------------*/
/* Overrides for CMD_PROP_RADIO_DIV_SETUP */
uint32_t overrides[] =
{
/* override_synth.xml */
HW32_ARRAY_OVERRIDE(0x6088, 1),
(uint32_t)0x0000001A,
ADI_HALFREG_OVERRIDE(0, 61, 0xF, 0xD),
HW32_ARRAY_OVERRIDE(0x4038, 1),
(uint32_t)0x0000003A,
HW_REG_OVERRIDE(0x4020, 0x7F00),
HW_REG_OVERRIDE(0x4064, 0x0040),
(uint32_t)0x684A3,
(uint32_t)0xC0040141,
(uint32_t)0x0533B107,
(uint32_t)0xA480583,
(uint32_t)0x7AB80603,
ADI_REG_OVERRIDE(1, 4, 0x1F),
ADI_HALFREG_OVERRIDE(1, 7, 0x4, 0x4),
HW_REG_OVERRIDE(0x6084, 0x35F1),
(uint32_t)0x00038883,
(uint32_t)0x00FB88A3,
/* TX power override */
ADI_REG_OVERRIDE(0, 12, 0xF9),
/* Overrides for CRC16 functionality */
(uint32_t)0x943,
(uint32_t)0x963,
(uint32_t)0xFFFFFFFF,
};
/*---------------------------------------------------------------------------*/
/* CMD_PROP_RADIO_DIV_SETUP */
rfc_CMD_PROP_RADIO_DIV_SETUP_t smartrf_settings_cmd_prop_radio_div_setup =
{
.commandNo = 0x3807,
.status = 0x0000,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = 0x0,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = 0x1,
.condition.nSkip = 0x0,
.modulation.modType = 0x1,
.modulation.deviation = 0x64,
.symbolRate.preScale = 0xf,
.symbolRate.rateWord = 0x8000,
.rxBw = 0x24,
.preamConf.nPreamBytes = 0x3,
.preamConf.preamMode = 0x0,
.formatConf.nSwBits = 0x18,
.formatConf.bBitReversal = 0x0,
.formatConf.bMsbFirst = 0x1,
.formatConf.fecMode = 0x0,
/* 7: .4g mode with dynamic whitening and CRC choice */
.formatConf.whitenMode = 0x7,
.config.frontEndMode = 0x0, /* Differential mode */
.config.biasMode = 0x1, /* External bias*/
.config.bNoFsPowerUp = 0x0,
.txPower = 0x00, /* Driver sets correct value */
.pRegOverride = overrides,
.intFreq = 0x8000,
.centerFreq = 868,
.loDivider = 0x05,
};
/*---------------------------------------------------------------------------*/
/* CMD_FS */
rfc_CMD_FS_t smartrf_settings_cmd_fs =
{
.commandNo = 0x0803,
.status = 0x0000,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = 0x0,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = 0x1,
.condition.nSkip = 0x0,
.frequency = 868,
.fractFreq = 0x0000,
.synthConf.bTxMode = 0x0,
.synthConf.refFreq = 0x0,
.__dummy0 = 0x00,
.midPrecal = 0x00,
.ktPrecal = 0x00,
.tdcPrecal = 0x0000,
};
/*---------------------------------------------------------------------------*/
/* CMD_PROP_TX_ADV */
rfc_CMD_PROP_TX_ADV_t smartrf_settings_cmd_prop_tx_adv =
{
.commandNo = 0x3803,
.status = 0x0000,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = 0x0,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = 0x1,
.condition.nSkip = 0x0,
.pktConf.bFsOff = 0x0,
.pktConf.bUseCrc = 0x1,
.pktConf.bCrcIncSw = 0x0, /* .4g mode */
.pktConf.bCrcIncHdr = 0x0, /* .4g mode */
.numHdrBits = 0x10 /* 16: .4g mode */,
.pktLen = 0x0000,
.startConf.bExtTxTrig = 0x0,
.startConf.inputMode = 0x0,
.startConf.source = 0x0,
.preTrigger.triggerType = TRIG_REL_START,
.preTrigger.bEnaCmd = 0x0,
.preTrigger.triggerNo = 0x0,
.preTrigger.pastTrig = 0x1,
.preTime = 0x00000000,
.syncWord = 0x0055904e,
.pPkt = 0,
};
/*---------------------------------------------------------------------------*/
/* CMD_PROP_RX_ADV */
rfc_CMD_PROP_RX_ADV_t smartrf_settings_cmd_prop_rx_adv =
{
.commandNo = 0x3804,
.status = 0x0000,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = 0x0,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = 0x1,
.condition.nSkip = 0x0,
.pktConf.bFsOff = 0x0,
.pktConf.bRepeatOk = 0x1,
.pktConf.bRepeatNok = 0x1,
.pktConf.bUseCrc = 0x1,
.pktConf.bCrcIncSw = 0x0, /* .4g mode */
.pktConf.bCrcIncHdr = 0x0, /* .4g mode */
.pktConf.endType = 0x0,
.pktConf.filterOp = 0x1,
.rxConf.bAutoFlushIgnored = 0x1,
.rxConf.bAutoFlushCrcErr = 0x1,
.rxConf.bIncludeHdr = 0x0,
.rxConf.bIncludeCrc = 0x0,
.rxConf.bAppendRssi = 0x1,
.rxConf.bAppendTimestamp = 0x0,
.rxConf.bAppendStatus = 0x1,
.syncWord0 = 0x0055904e,
.syncWord1 = 0x00000000,
.maxPktLen = 0x0000, /* To be populated by the driver. */
.hdrConf.numHdrBits = 0x10, /* 16: .4g mode */
.hdrConf.lenPos = 0x0, /* .4g mode */
.hdrConf.numLenBits = 0x0B, /* 11 = 0x0B .4g mode */
.addrConf.addrType = 0x0,
.addrConf.addrSize = 0x0,
.addrConf.addrPos = 0x0,
.addrConf.numAddr = 0x0,
.lenOffset = -4, /* .4g mode */
.endTrigger.triggerType = TRIG_NEVER,
.endTrigger.bEnaCmd = 0x0,
.endTrigger.triggerNo = 0x0,
.endTrigger.pastTrig = 0x0,
.endTime = 0x00000000,
.pAddr = 0,
.pQueue = 0,
.pOutput = 0,
};
/*---------------------------------------------------------------------------*/