osd-contiki/cpu/cc26xx-cc13xx/rf-core/api/ieee_cmd.h

612 lines
41 KiB
C
Raw Permalink Normal View History

/******************************************************************************
* Filename: ieee_cmd.h
* Revised: $ $
* Revision: $ $
*
* Description: CC26xx/CC13xx API for IEEE 802.15.4 commands
*
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef IEEE_CMD_H_
#define IEEE_CMD_H_
#ifndef __RFC_STRUCT
#ifdef __GNUC__
#define __RFC_STRUCT __attribute__ ((aligned (4)))
#else
#define __RFC_STRUCT
#endif
#endif
//! \addtogroup rfc
//! @{
//! \addtogroup ieee_cmd
//! @{
#include <stdint.h>
#include "mailbox.h"
#include "common_cmd.h"
typedef struct __RFC_STRUCT rfc_CMD_IEEE_RX_s rfc_CMD_IEEE_RX_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_ED_SCAN_s rfc_CMD_IEEE_ED_SCAN_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_TX_s rfc_CMD_IEEE_TX_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_CSMA_s rfc_CMD_IEEE_CSMA_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_RX_ACK_s rfc_CMD_IEEE_RX_ACK_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_BG_s rfc_CMD_IEEE_ABORT_BG_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_MOD_CCA_s rfc_CMD_IEEE_MOD_CCA_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_MOD_FILT_s rfc_CMD_IEEE_MOD_FILT_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_MOD_SRC_MATCH_s rfc_CMD_IEEE_MOD_SRC_MATCH_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_FG_s rfc_CMD_IEEE_ABORT_FG_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_STOP_FG_s rfc_CMD_IEEE_STOP_FG_t;
typedef struct __RFC_STRUCT rfc_CMD_IEEE_CCA_REQ_s rfc_CMD_IEEE_CCA_REQ_t;
typedef struct __RFC_STRUCT rfc_ieeeRxOutput_s rfc_ieeeRxOutput_t;
typedef struct __RFC_STRUCT rfc_shortAddrEntry_s rfc_shortAddrEntry_t;
typedef struct __RFC_STRUCT rfc_ieeeRxCorrCrc_s rfc_ieeeRxCorrCrc_t;
//! \addtogroup CMD_IEEE_RX
//! @{
#define CMD_IEEE_RX 0x2801
struct __RFC_STRUCT rfc_CMD_IEEE_RX_s {
uint16_t commandNo; //!< The command ID number 0x2801
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to tune to in the start of the operation<br>
//!< 0: Use existing channel<br>
//!< 11&ndash;26: Use as IEEE 802.15.4 channel, i.e. frequency is (2405 + 5 &times; (channel - 11)) MHz<br>
//!< 60&ndash;207: Frequency is (2300 + channel) MHz<br>
//!< Others: <i>Reserved</i>
struct {
uint8_t bAutoFlushCrc:1; //!< If 1, automatically remove packets with CRC error from Rx queue
uint8_t bAutoFlushIgn:1; //!< If 1, automatically remove packets that can be ignored according to frame filtering from Rx queue
uint8_t bIncludePhyHdr:1; //!< If 1, include the received PHY header field in the stored packet; otherwise discard it
uint8_t bIncludeCrc:1; //!< If 1, include the received CRC field in the stored packet; otherwise discard it
uint8_t bAppendRssi:1; //!< If 1, append an RSSI byte to the packet in the Rx queue
uint8_t bAppendCorrCrc:1; //!< If 1, append a correlation value and CRC result byte to the packet in the Rx queue
uint8_t bAppendSrcInd:1; //!< If 1, append an index from the source matching algorithm
uint8_t bAppendTimestamp:1; //!< If 1, append a timestamp to the packet in the Rx queue
} rxConfig;
dataQueue_t* pRxQ; //!< Pointer to receive queue
rfc_ieeeRxOutput_t *pOutput; //!< Pointer to output structure (NULL: Do not store results)
struct {
uint16_t frameFiltEn:1; //!< \brief 0: Disable frame filtering<br>
//!< 1: Enable frame filtering
uint16_t frameFiltStop:1; //!< \brief 0: Receive all packets to the end<br>
//!< 1: Stop receiving frame once frame filtering has caused the frame to be rejected.
uint16_t autoAckEn:1; //!< \brief 0: Disable auto ACK<br>
//!< 1: Enable auto ACK.
uint16_t slottedAckEn:1; //!< \brief 0: Non-slotted ACK<br>
//!< 1: Slotted ACK.
uint16_t autoPendEn:1; //!< \brief 0: Auto-pend disabled<br>
//!< 1: Auto-pend enabled
uint16_t defaultPend:1; //!< The value of the pending data bit in auto ACK packets that are not subject to auto-pend
uint16_t bPendDataReqOnly:1; //!< \brief 0: Use auto-pend for any packet<br>
//!< 1: Use auto-pend for data request packets only
uint16_t bPanCoord:1; //!< \brief 0: Device is not PAN coordinator<br>
//!< 1: Device is PAN coordinator
uint16_t maxFrameVersion:2; //!< Reject frames where the frame version field in the FCF is greater than this value
uint16_t fcfReservedMask:3; //!< Value to be AND-ed with the reserved part of the FCF; frame rejected if result is non-zero
uint16_t modifyFtFilter:2; //!< \brief Treatment of MSB of frame type field before frame-type filtering:<br>
//!< 0: No modification<br>
//!< 1: Invert MSB<br>
//!< 2: Set MSB to 0<br>
//!< 3: Set MSB to 1
uint16_t bStrictLenFilter:1; //!< \brief 0: Accept acknowledgement frames of any length >= 5<br>
//!< 1: Accept only acknowledgement frames of length 5
} frameFiltOpt; //!< Frame filtering options
struct {
uint8_t bAcceptFt0Beacon:1; //!< \brief Treatment of frames with frame type 000 (beacon):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt1Data:1; //!< \brief Treatment of frames with frame type 001 (data):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt2Ack:1; //!< \brief Treatment of frames with frame type 010 (ACK):<br>
//!< 0: Reject, unless running ACK receive command<br>
//!< 1: Always accept
uint8_t bAcceptFt3MacCmd:1; //!< \brief Treatment of frames with frame type 011 (MAC command):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt4Reserved:1; //!< \brief Treatment of frames with frame type 100 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt5Reserved:1; //!< \brief Treatment of frames with frame type 101 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt6Reserved:1; //!< \brief Treatment of frames with frame type 110 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt7Reserved:1; //!< \brief Treatment of frames with frame type 111 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
} frameTypes; //!< Frame types to receive in frame filtering
struct {
uint8_t ccaEnEnergy:1; //!< Enable energy scan as CCA source
uint8_t ccaEnCorr:1; //!< Enable correlator based carrier sense as CCA source
uint8_t ccaEnSync:1; //!< Enable sync found based carrier sense as CCA source
uint8_t ccaCorrOp:1; //!< \brief Operator to use between energy based and correlator based CCA<br>
//!< 0: Report busy channel if either ccaEnergy or ccaCorr are busy<br>
//!< 1: Report busy channel if both ccaEnergy and ccaCorr are busy
uint8_t ccaSyncOp:1; //!< \brief Operator to use between sync found based CCA and the others<br>
//!< 0: Always report busy channel if ccaSync is busy<br>
//!< 1: Always report idle channel if ccaSync is idle
uint8_t ccaCorrThr:2; //!< Threshold for number of correlation peaks in correlator based carrier sense
} ccaOpt; //!< CCA options
int8_t ccaRssiThr; //!< RSSI threshold for CCA
uint8_t __dummy0;
uint8_t numExtEntries; //!< Number of extended address entries
uint8_t numShortEntries; //!< Number of short address entries
uint32_t* pExtEntryList; //!< Pointer to list of extended address entries
rfc_shortAddrEntry_t *pShortEntryList;//!< Pointer to list of short address entries
uint64_t localExtAddr; //!< The extended address of the local device
uint16_t localShortAddr; //!< The short address of the local device
uint16_t localPanID; //!< The PAN ID of the local device
uint16_t __dummy1;
uint8_t __dummy2;
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the Rx operation
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the Rx
//!< operation
};
//! @}
//! \addtogroup CMD_IEEE_ED_SCAN
//! @{
#define CMD_IEEE_ED_SCAN 0x2802
struct __RFC_STRUCT rfc_CMD_IEEE_ED_SCAN_s {
uint16_t commandNo; //!< The command ID number 0x2802
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t channel; //!< \brief Channel to tune to in the start of the operation<br>
//!< 0: Use existing channel<br>
//!< 11&ndash;26: Use as IEEE 802.15.4 channel, i.e. frequency is (2405 + 5 &times; (channel - 11)) MHz<br>
//!< 60&ndash;207: Frequency is (2300 + channel) MHz<br>
//!< Others: <i>Reserved</i>
struct {
uint8_t ccaEnEnergy:1; //!< Enable energy scan as CCA source
uint8_t ccaEnCorr:1; //!< Enable correlator based carrier sense as CCA source
uint8_t ccaEnSync:1; //!< Enable sync found based carrier sense as CCA source
uint8_t ccaCorrOp:1; //!< \brief Operator to use between energy based and correlator based CCA<br>
//!< 0: Report busy channel if either ccaEnergy or ccaCorr are busy<br>
//!< 1: Report busy channel if both ccaEnergy and ccaCorr are busy
uint8_t ccaSyncOp:1; //!< \brief Operator to use between sync found based CCA and the others<br>
//!< 0: Always report busy channel if ccaSync is busy<br>
//!< 1: Always report idle channel if ccaSync is idle
uint8_t ccaCorrThr:2; //!< Threshold for number of correlation peaks in correlator based carrier sense
} ccaOpt; //!< CCA options
int8_t ccaRssiThr; //!< RSSI threshold for CCA
uint8_t __dummy0;
int8_t maxRssi; //!< The maximum RSSI recorded during the ED scan
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the Rx operation
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the Rx
//!< operation
};
//! @}
//! \addtogroup CMD_IEEE_TX
//! @{
#define CMD_IEEE_TX 0x2C01
struct __RFC_STRUCT rfc_CMD_IEEE_TX_s {
uint16_t commandNo; //!< The command ID number 0x2C01
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
struct {
uint8_t bIncludePhyHdr:1; //!< \brief 0: Find PHY header automatically<br>
//!< 1: Insert PHY header from the buffer
uint8_t bIncludeCrc:1; //!< \brief 0: Append automatically calculated CRC<br>
//!< 1: Insert FCS (CRC) from the buffer
uint8_t :1;
uint8_t payloadLenMsb:5; //!< \brief Most significant bits of payload length. Should only be non-zero to create long
//!< non-standard packets for test purposes
} txOpt;
uint8_t payloadLen; //!< Number of bytes in the payload
uint8_t* pPayload; //!< Pointer to payload buffer of size <code>payloadLen</code>
ratmr_t timeStamp; //!< Time stamp of transmitted frame
};
//! @}
//! \addtogroup CMD_IEEE_CSMA
//! @{
#define CMD_IEEE_CSMA 0x2C02
struct __RFC_STRUCT rfc_CMD_IEEE_CSMA_s {
uint16_t commandNo; //!< The command ID number 0x2C02
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint16_t randomState; //!< The state of the pseudo-random generator
uint8_t macMaxBE; //!< The IEEE 802.15.4 MAC parameter <i>macMaxBE</i>
uint8_t macMaxCSMABackoffs; //!< The IEEE 802.15.4 MAC parameter <i>macMaxCSMABackoffs</i>
struct {
uint8_t initCW:5; //!< The initialization value for the CW parameter
uint8_t bSlotted:1; //!< \brief 0: non-slotted CSMA<br>
//!< 1: slotted CSMA
uint8_t rxOffMode:2; //!< \brief 0: RX stays on during CSMA backoffs<br>
//!< 1: The CSMA-CA algorithm will suspend the receiver if no frame is being received<br>
//!< 2: The CSMA-CA algorithm will suspend the receiver if no frame is being received,
//!< or after finishing it (including auto ACK) otherwise<br>
//!< 3: The CSMA-CA algorithm will suspend the receiver immediately during back-offs
} csmaConfig;
uint8_t NB; //!< The NB parameter from the IEEE 802.15.4 CSMA-CA algorithm
uint8_t BE; //!< The BE parameter from the IEEE 802.15.4 CSMA-CA algorithm
uint8_t remainingPeriods; //!< The number of remaining periods from a paused backoff countdown
int8_t lastRssi; //!< RSSI measured at the last CCA operation
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to end the CSMA-CA operation
ratmr_t lastTimeStamp; //!< Time of the last CCA operation
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to end the
//!< CSMA-CA operation
};
//! @}
//! \addtogroup CMD_IEEE_RX_ACK
//! @{
#define CMD_IEEE_RX_ACK 0x2C03
struct __RFC_STRUCT rfc_CMD_IEEE_RX_ACK_s {
uint16_t commandNo; //!< The command ID number 0x2C03
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
uint8_t seqNo; //!< Sequence number to expect
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} endTrigger; //!< Trigger that causes the device to give up acknowledgement reception
ratmr_t endTime; //!< \brief Time used together with <code>endTrigger</code> that causes the device to give up
//!< acknowledgement reception
};
//! @}
//! \addtogroup CMD_IEEE_ABORT_BG
//! @{
#define CMD_IEEE_ABORT_BG 0x2C04
struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_BG_s {
uint16_t commandNo; //!< The command ID number 0x2C04
uint16_t status; //!< \brief An integer telling the status of the command. This value is
//!< updated by the radio CPU during operation and may be read by the
//!< system CPU at any time.
rfc_radioOp_t *pNextOp; //!< Pointer to the next operation to run after this operation is done
ratmr_t startTime; //!< Absolute or relative start time (depending on the value of <code>startTrigger</code>)
struct {
uint8_t triggerType:4; //!< The type of trigger
uint8_t bEnaCmd:1; //!< \brief 0: No alternative trigger command<br>
//!< 1: CMD_TRIGGER can be used as an alternative trigger
uint8_t triggerNo:2; //!< The trigger number of the CMD_TRIGGER command that triggers this action
uint8_t pastTrig:1; //!< \brief 0: A trigger in the past is never triggered, or for start of commands, give an error<br>
//!< 1: A trigger in the past is triggered as soon as possible
} startTrigger; //!< Identification of the trigger that starts the operation
struct {
uint8_t rule:4; //!< Condition for running next command: Rule for how to proceed
uint8_t nSkip:4; //!< Number of skips if the rule involves skipping
} condition;
};
//! @}
//! \addtogroup CMD_IEEE_MOD_CCA
//! @{
#define CMD_IEEE_MOD_CCA 0x2001
struct __RFC_STRUCT rfc_CMD_IEEE_MOD_CCA_s {
uint16_t commandNo; //!< The command ID number 0x2001
struct {
uint8_t ccaEnEnergy:1; //!< Enable energy scan as CCA source
uint8_t ccaEnCorr:1; //!< Enable correlator based carrier sense as CCA source
uint8_t ccaEnSync:1; //!< Enable sync found based carrier sense as CCA source
uint8_t ccaCorrOp:1; //!< \brief Operator to use between energy based and correlator based CCA<br>
//!< 0: Report busy channel if either ccaEnergy or ccaCorr are busy<br>
//!< 1: Report busy channel if both ccaEnergy and ccaCorr are busy
uint8_t ccaSyncOp:1; //!< \brief Operator to use between sync found based CCA and the others<br>
//!< 0: Always report busy channel if ccaSync is busy<br>
//!< 1: Always report idle channel if ccaSync is idle
uint8_t ccaCorrThr:2; //!< Threshold for number of correlation peaks in correlator based carrier sense
} newCcaOpt; //!< New value of <code>ccaOpt</code> for the running background level operation
int8_t newCcaRssiThr; //!< New value of <code>ccaRssiThr</code> for the running background level operation
};
//! @}
//! \addtogroup CMD_IEEE_MOD_FILT
//! @{
#define CMD_IEEE_MOD_FILT 0x2002
struct __RFC_STRUCT rfc_CMD_IEEE_MOD_FILT_s {
uint16_t commandNo; //!< The command ID number 0x2002
struct {
uint16_t frameFiltEn:1; //!< \brief 0: Disable frame filtering<br>
//!< 1: Enable frame filtering
uint16_t frameFiltStop:1; //!< \brief 0: Receive all packets to the end<br>
//!< 1: Stop receiving frame once frame filtering has caused the frame to be rejected.
uint16_t autoAckEn:1; //!< \brief 0: Disable auto ACK<br>
//!< 1: Enable auto ACK.
uint16_t slottedAckEn:1; //!< \brief 0: Non-slotted ACK<br>
//!< 1: Slotted ACK.
uint16_t autoPendEn:1; //!< \brief 0: Auto-pend disabled<br>
//!< 1: Auto-pend enabled
uint16_t defaultPend:1; //!< The value of the pending data bit in auto ACK packets that are not subject to auto-pend
uint16_t bPendDataReqOnly:1; //!< \brief 0: Use auto-pend for any packet<br>
//!< 1: Use auto-pend for data request packets only
uint16_t bPanCoord:1; //!< \brief 0: Device is not PAN coordinator<br>
//!< 1: Device is PAN coordinator
uint16_t maxFrameVersion:2; //!< Reject frames where the frame version field in the FCF is greater than this value
uint16_t fcfReservedMask:3; //!< Value to be AND-ed with the reserved part of the FCF; frame rejected if result is non-zero
uint16_t modifyFtFilter:2; //!< \brief Treatment of MSB of frame type field before frame-type filtering:<br>
//!< 0: No modification<br>
//!< 1: Invert MSB<br>
//!< 2: Set MSB to 0<br>
//!< 3: Set MSB to 1
uint16_t bStrictLenFilter:1; //!< \brief 0: Accept acknowledgement frames of any length >= 5<br>
//!< 1: Accept only acknowledgement frames of length 5
} newFrameFiltOpt; //!< New value of <code>frameFiltOpt</code> for the running background level operation
struct {
uint8_t bAcceptFt0Beacon:1; //!< \brief Treatment of frames with frame type 000 (beacon):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt1Data:1; //!< \brief Treatment of frames with frame type 001 (data):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt2Ack:1; //!< \brief Treatment of frames with frame type 010 (ACK):<br>
//!< 0: Reject, unless running ACK receive command<br>
//!< 1: Always accept
uint8_t bAcceptFt3MacCmd:1; //!< \brief Treatment of frames with frame type 011 (MAC command):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt4Reserved:1; //!< \brief Treatment of frames with frame type 100 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt5Reserved:1; //!< \brief Treatment of frames with frame type 101 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt6Reserved:1; //!< \brief Treatment of frames with frame type 110 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
uint8_t bAcceptFt7Reserved:1; //!< \brief Treatment of frames with frame type 111 (reserved):<br>
//!< 0: Reject<br>
//!< 1: Accept
} newFrameTypes; //!< New value of <code>frameTypes</code> for the running background level operation
};
//! @}
//! \addtogroup CMD_IEEE_MOD_SRC_MATCH
//! @{
#define CMD_IEEE_MOD_SRC_MATCH 0x2003
struct __RFC_STRUCT rfc_CMD_IEEE_MOD_SRC_MATCH_s {
uint16_t commandNo; //!< The command ID number 0x2003
struct {
uint8_t bEnable:1; //!< \brief 0: Disable entry<br>
//!< 1: Enable entry
uint8_t srcPend:1; //!< New value of the pending bit for the entry
uint8_t entryType:1; //!< \brief 0: Extended address<br>
//!< 1: Short address
} options;
uint8_t entryNo; //!< Index of entry to enable or disable
};
//! @}
//! \addtogroup CMD_IEEE_ABORT_FG
//! @{
#define CMD_IEEE_ABORT_FG 0x2401
struct __RFC_STRUCT rfc_CMD_IEEE_ABORT_FG_s {
uint16_t commandNo; //!< The command ID number 0x2401
};
//! @}
//! \addtogroup CMD_IEEE_STOP_FG
//! @{
#define CMD_IEEE_STOP_FG 0x2402
struct __RFC_STRUCT rfc_CMD_IEEE_STOP_FG_s {
uint16_t commandNo; //!< The command ID number 0x2402
};
//! @}
//! \addtogroup CMD_IEEE_CCA_REQ
//! @{
#define CMD_IEEE_CCA_REQ 0x2403
struct __RFC_STRUCT rfc_CMD_IEEE_CCA_REQ_s {
uint16_t commandNo; //!< The command ID number 0x2403
int8_t currentRssi; //!< The RSSI currently observed on the channel
int8_t maxRssi; //!< The maximum RSSI observed on the channel since Rx was started
struct {
uint8_t ccaState:2; //!< \brief Value of the current CCA state<br>
//!< 0: Idle<br>
//!< 1: Busy<br>
//!< 2: Invalid
uint8_t ccaEnergy:2; //!< \brief Value of the current energy detect CCA state<br>
//!< 0: Idle<br>
//!< 1: Busy<br>
//!< 2: Invalid
uint8_t ccaCorr:2; //!< \brief Value of the current correlator based carrier sense CCA state<br>
//!< 0: Idle<br>
//!< 1: Busy<br>
//!< 2: Invalid
uint8_t ccaSync:1; //!< \brief Value of the current sync found based carrier sense CCA state<br>
//!< 0: Idle<br>
//!< 1: Busy
} ccaInfo;
};
//! @}
//! \addtogroup ieeeRxOutput
//! @{
//! Output structure for CMD_IEEE_RX
struct __RFC_STRUCT rfc_ieeeRxOutput_s {
uint8_t nTxAck; //!< Total number of transmitted ACK frames
uint8_t nRxBeacon; //!< Number of received beacon frames
uint8_t nRxData; //!< Number of received data frames
uint8_t nRxAck; //!< Number of received acknowledgement frames
uint8_t nRxMacCmd; //!< Number of received MAC command frames
uint8_t nRxReserved; //!< Number of received frames with reserved frame type
uint8_t nRxNok; //!< Number of received frames with CRC error
uint8_t nRxIgnored; //!< Number of frames received that are to be ignored
uint8_t nRxBufFull; //!< Number of received frames discarded because the Rx buffer was full
int8_t lastRssi; //!< RSSI of last received frame
int8_t maxRssi; //!< Highest RSSI observed in the operation
uint8_t __dummy0;
ratmr_t beaconTimeStamp; //!< Time stamp of last received beacon frame
};
//! @}
//! \addtogroup shortAddrEntry
//! @{
//! Structure for short address entries
struct __RFC_STRUCT rfc_shortAddrEntry_s {
uint16_t shortAddr; //!< Short address
uint16_t panId; //!< PAN ID
};
//! @}
//! \addtogroup ieeeRxCorrCrc
//! @{
//! Receive status byte that may be appended to message in receive buffer
struct __RFC_STRUCT rfc_ieeeRxCorrCrc_s {
struct {
uint8_t corr:6; //!< The correlation value
uint8_t bIgnore:1; //!< 1 if the packet should be rejected by frame filtering, 0 otherwise
uint8_t bCrcErr:1; //!< 1 if the packet was received with CRC error, 0 otherwise
} status;
};
//! @}
//! @}
//! @}
#endif /* IEEE_CMD_H_ */