gitolite/README.txt
Sitaram Chamarty 49580fe4b3 doc split :(
Background

  * I needed to have the documentation under CC-BY-NC-SA (something
    happened to force me to choose)

  * Distros don't like the NC part.  They'd rather drop the
    documentation entirely instead

  * I don't like that; it bothers me that even a clueful guy won't be
    able to do a basic install with what comes in the package.

  * Meanwhile, I have always had the occasional "TL;DR" complaint about
    my docs

Taking all this into account, it seemed like the best way was:

  * Create a brand new README.txt that is crisp enough for someone to
    glance through and quickly get started.  At more then 300 lines, it
    covers enough ground that probably 60% of sites don't need more.

    Put this under the CC-BY-SA license, which is on the "good" list for
    Fedora (and also Debian, I am told).

  * Move the current documents to a new "gitolite-doc" repo that distros
    can simply ignore, but anyone who has trouble can go to.

    Make sure the online pages have the same content at the same URLs as
    they do now, getting it instead from this new repo.

    Link to the main URL in the new README.txt
2012-06-26 20:58:51 +05:30

361 lines
11 KiB
Plaintext

Github-users: click the 'wiki' link before sending me anything via github.
Existing users: this is gitolite v3.x. If you are upgrading from v2.x this
file will not suffice; you *must* check the online docs (see below for URL).
------------------------------------------------------------------------
DOCUMENTATION FOR GITOLITE
==========================
This file contains basic documentation for a fresh, ssh-based, installation of
gitolite and basic usage of its most important features.
If you need more details on any of the topics covered here, or help with some
troubleshooting, or just wish to read about the advanced features not covered
here, please check the gitolite online documentation at:
http://sitaramc.github.com/gitolite/master-toc.html
This file contains the following sections:
INSTALLATION AND SETUP
ADDING USERS AND REPOS
HELP FOR YOUR USERS
BASIC SYNTAX
ACCESS RULES
GROUPS
COMMANDS
THE 'rc' FILE
GIT-CONFIG
GIT-DAEMON
GITWEB
CONTACT
LICENSE
------------------------------------------------------------------------
INSTALLATION AND SETUP
----------------------
Server requirements:
* any unix system
* sh
* git 1.6.6+
* perl 5.8.8+
* openssh 5.0+
* a dedicated userid to host the repos (in this document, we assume it
is 'git'), with shell access ONLY by 'su - git' from some other userid
on the same server.
Steps to install:
* login as 'git' as described above
* make sure ~/.ssh/authorized_keys is empty or non-existent
* make sure your ssh public key from your workstation is available at
$HOME/YourName.pub
* run the following commands:
git clone git://github.com/sitaramc/gitolite
mkdir -p $HOME/bin
gitolite/install -to $HOME/bin
gitolite setup -pk YourName.pub
If the last command doesn't run perhaps 'bin' in not in your 'PATH'.
You can either add it, or just run:
$HOME/bin/gitolite setup -pk YourName.pub
ADDING USERS AND REPOS
----------------------
Do NOT add new repos or users manually on the server. Gitolite users,
repos, and access rules are maintained by making changes to a special repo
called 'gitolite-admin' and pushing those changes to the server.
----
To administer your gitolite installation, start by doing this on your
workstation (if you have not already done so):
git clone git@host:gitolite-admin
**NOTE**: if you are asked for a password, something has gone wrong.
Now if you 'cd gitolite-admin', you will see two subdirectories in it:
'conf' and 'keydir'.
To add new users alice, bob, and carol, obtain their public keys and add
them to 'keydir' as alice.pub, bob.pub, and carol.pub respectively.
To add a new repo 'foo' and give different levels of access to these
users, edit the file 'conf/gitolite.conf' and add lines like this:
repo foo
RW+ = alice
RW = bob
R = carol
See the 'ACCESS RULES' section later for more details.
Once you have made these changes, do something like this:
git add conf
git add keydir
git commit -m 'added foo, gave access to alice, bob, carol'
git push
When the push completes, gitolite will add the new users to
~/.ssh/authorized_keys on the server, as well as create a new, empty, repo
called 'foo'.
HELP FOR YOUR USERS
-------------------
Once a user has sent you their public key and you have added them as
specified above and given them access, you have to tell them what URL to
access their repos at. This is usually 'git clone git@host:reponame'; see
man git-clone for other forms.
**NOTE**: again, if they are asked for a password, something is wrong.
If they need to know what repos they have access to, they just have to run
'ssh git@host info'; see 'COMMANDS' section later for more on this.
BASIC SYNTAX
------------
The basic syntax of the conf file is very simple.
* Everything is space separated; there are no commas, semicolons, etc.,
in the syntax.
* Comments are in the usual perl/shell style.
* User and repo names are as simple as possible; they must start with an
alphanumeric, but after that they can also contain '.', '_', or '-'.
Usernames can optionally be followed by an '@' and a domainname
containing at least one '.'; this allows you to use an email address
as someone's username.
Reponames can contain '/' characters; this allows you to put your
repos in a tree-structure for convenience.
* There are no continuation lines.
ACCESS RULES
------------
This section is mostly 'by example'.
Gitolite's access rules are very powerful. The simplest use was already
shown above. Here is a slightly more detailed example:
repo foo
RW+ = alice
- master = bob
- refs/tags/v[0-9] = bob
RW = bob
RW refs/tags/v[0-9] = carol
R = dave
For clones and fetches, as long as the user is listed with an R, RW
or RW+ in at least one rule, he is allowed to read the repo.
For pushes, rules are processed in sequence until a rule is found
where the user, the permission (see note 1), and the refex (note 2)
*all* match. At that point, if the permission on the matched rule
was '-', the push is denied, otherwise it is allowed. If no rule
matches, the push is denied.
Note 1: permission matching:
* a permission of RW matches only a fast-forward push or create
* a permission of RW+ matches any type of push
* a permission or '-' matches any type of push
Note 2: refex matching:
(refex = optional regex to match the ref being pushed)
* an empty refex is treated as 'refs/.*'
* a refex that does not start with 'refs/' is prefixed with 'refs/heads/'
* finally, a '^' is prefixed
* the ref being pushed is matched against this resulting refex
With all that background, here's what the example rules say:
* alice can do anything to any branch or tag -- create, push,
delete, rewind/overwrite etc.
* bob can create or fast-forward push any branch whose name does
not start with 'master' and create any tag whose name does not
start with 'v'+digit.
* carol can create tags whose names start with 'v'+digit.
* dave can clone/fetch.
GROUPS
------
Gitolite allows you to groups users or repos for convenience. Here's an
example that creates two groups of users:
@staff = alice bob carol
@interns = ashok
repo secret
RW = @staff
repo foss
RW+ = @staff
RW = @interns
Group lists accumulate. The following two lines have the same effect as
the earlier definition of @staff above:
@staff = alice bob
@staff = carol
You can also use group names in other group names:
@all-devs = @staff @interns
Finally, @all is a special group name that is often convenient to use if
you really mean 'all repos' or 'all users'.
COMMANDS
--------
Users can run certain commands remotely, using ssh. For example:
ssh git@host help
prints a list of available commands.
The most commonly used command is 'info'. All commands respond to a
single argument of '-h' with suitable information.
If you have shell on the server, you have a lot more commands available to
you; try running 'gitolite help'.
THE 'rc' FILE
--------------
Some of the instructions below may require you to edit the rc file
(~/.gitolite.rc on the server).
The rc file is perl code, but you do NOT need to know perl to edit it.
Just mind the commas, use single quotes unless you know what you're doing,
and make sure the brackets and braces stay matched up.
GIT-CONFIG
----------
Gitolite lets you set git-config values for individual repos without
having to log on to the server and run 'git config' commands:
repo foo
config hooks.mailinglist = foo-commits@example.tld
config hooks.emailprefix = '[foo] '
config foo.bar = ''
config foo.baz =
**WARNING**
The last syntax shown above is the *only* way to *delete* a config
variable once you have added it. Merely removing it from the conf
file will *not* delete it from the repo.git/config file.
**SECURITY NOTE**
Some git-config keys allow arbitrary code to be run on the server.
If all of your gitolite admins already have shell access to the server
account hosting it, you can edit the rc file (~/.gitolite.rc) on the
server, and change the GIT_CONFIG_KEYS line to look like this:
GIT_CONFIG_KEYS => '.*',
Otherwise, give it a space-separated list of regular expressions that
define what git-config keys are allowed. For example, this one allows
only variables whose names start with 'gitweb' or with 'gc' to be
defined:
GIT_CONFIG_KEYS => 'gitweb\..* gc\..*',
GIT-DAEMON
----------
Gitolite creates the 'git-daemon-export-ok' file for any repo that is
readable by a special user called 'daemon', like so:
repo foo
R = daemon
GITWEB
------
Any repo that is readable by a special user called 'gitweb' will be added
to the projects.list file.
repo foo
R = gitweb
Or you can set one or more of the following config variables instead:
repo foo
config gitweb.owner = some person's name
config gitweb.description = some description
config gitweb.category = some category
**NOTE**
You will probably need to change the UMASK in the rc file from the
default (0077) to 0027 and add whatever user your gitweb is running as
to the 'git' group. After that, you need to run a one-time 'chmod -R'
on the already created files and directories.
------------------------------------------------------------------------
CONTACT
-------
Author: sitaramc@gmail.com, sitaram@atc.tcs.com
Mailing list: gitolite@googlegroups.com
List subscribe address : gitolite+subscribe@googlegroups.com
IRC: #git and #gitolite on freenode. Note that I live in India (UTC+0530
time zone).
LICENSE
-------
The gitolite *code* is released under GPL v2. See COPYING for details.
This documentation, which is part of the source code repository, is
provided under a Creative Commons Attribution-ShareAlike 3.0 Unported
License -- see http://creativecommons.org/licenses/by-sa/3.0/