gitolite/conf/example.conf

298 lines
12 KiB
Plaintext

# example conf file for gitolite
# ----------------------------------------------------------------------------
# overall syntax:
# - everything is space-separated; no commas, semicolons, etc (except in
# the description string for gitweb)
# - comments in the normal shell-ish style; no surprises there
# - there are NO continuation lines of any kind
# - user/repo names as simple as possible; they must start with an
# alphanumeric, but after that they can also contain ".", "_", "-".
# - usernames can optionally be followed by an "@" and a domainname
# containing at least one "." (this allows you to use an email
# address as someone's username)
# - reponames can contain "/" characters (this allows you to
# put your repos in a tree-structure for convenience)
# objectives, over and above gitosis:
# - simpler syntax
# - easier gitweb/daemon control
# - specify who can push a branch/tag
# - specify who can rewind a branch/rewrite a tag
# ----------------------------------------------------------------------------
# GROUPS
# ------
# syntax:
# @groupname = [one or more names]
# groups let you club (user or group) names together for convenience
# * a group is like a #define in C except that it can *accumulate* values
# * the config file is parsed in a single-pass, so later *additions* to a
# group name cannot affect earlier *uses* of it
# The following examples should illustrate all this:
# you can have a group of people...
@staff = sitaram some_dev another-dev
# ...or a group of repos
@oss_repos = gitolite linux git perl rakudo entrans vkc
# ...or even a group of refexes
@important = master$ QA_done refs/tags/v[0-9]
# (see later for what "refex"s are; I'm only mentioning it
# here to emphasise that you can group them too)
# even sliced and diced differently
@admins = sitaram admin2
# notice that sitaram is in 2 groups (staff and admins)
# if you repeat a group name in another definition line, the
# new ones get added to the old ones (they accumulate)
@staff = au.thor
# so now "@staff" expands to all 4 names
# groups can include other groups, and the included group will
# be expanded to whatever value it currently has
@interns = indy james
@staff = bob @interns
# "@staff" expands to 7 names now
@interns = han
# "@interns" now has 3 names in it, but note that this does
# not change @staff
# REPO AND BRANCH PERMISSIONS
# ---------------------------
# syntax:
# start line:
# repo [one or more repos and/or repo groups]
# followed by one or more permissions lines:
# (C|R|RW|RW+|RWC|RW+C|RWD|RW+D|RWCD|RW+CD) [zero or more refexes] = [one or more users]
# there are 6 types of permissions: R, RW, and RW+ are simple (the "+" means
# permission to "rewind" -- force push a non-fast forward to -- a branch).
# The *standalone* C permission pertains to creating a REPO and is described
# in doc/wildcard-repositories.mkd. The C and D *suffixes* to the RW/RW+
# permissions pertain to creating or deleting a BRANCH, and are described in
# doc/3-faq-tips-etc.mkd, in the sections on "separating push and create
# rights" and "separating delete and rewind rights" respectively.
# how permissions are matched:
# - user, repo, and access (W or +) are known. For that combination, if
# any of the refexes match the refname being updated, the push succeeds.
# If none of them match, it fails
# what's a refex? a regex to match against the ref being updated (get it?)
# See next section for more on refexes
# BASIC PERMISSIONS (repo level only; apply to all branches/tags in repo)
# most important rule of all -- specify who can make changes
# to *this* file take effect
repo gitolite-admin
RW+ = @admins
# "@all" is a special, predefined, group name of all users
# (everyone who has a pubkey in keydir)
repo testing
RW+ = @all
# this repo is visible to staff but only sitaram can write to it
repo gitolite
R = @staff
RW+ = sitaram
# you can split up access rules for a repo for convenience
# (notice that @oss_repos contains gitolite also)
repo @oss_repos
R = @all
# set permissions to all repos. *Please* do see
# doc/3-faq-tips-etc.mkd for notes on this feature
repo @all
RW+ = @admins
# SPECIFYING AND USING A REFEX
# - refexes are specified in perl regex syntax
# - refexes are prefix-matched (they are internally anchored with "^"
# before being used), which means a refex like "refs/tags/v[0-9]"
# matches anything *starting with* that pattern. There may be text
# after it (example: refs/tags/v4-r3/p7), and it will still match
# ADVANCED PERMISSIONS USING REFEXES
# - if no refex appears, the rule applies to all refs in that repo
# - a refex is automatically prefixed by "refs/heads/" if it doesn't start
# with "refs/" (so tags have to be explicitly named as
# refs/tags/pattern)
# here's the example from
# Documentation/howto/update-hook-example.txt:
# refs/heads/master junio
# +refs/heads/pu junio
# refs/heads/cogito$ pasky
# refs/heads/bw/.* linus
# refs/heads/tmp/.* .*
# refs/tags/v[0-9].* junio
# and here're the equivalent gitolite refexes
repo git
RW master = junio
RW+ pu = junio
RW cogito$ = pasky
RW bw/ = linus
RW tmp/ = @all
RW refs/tags/v[0-9] = junio
# DENY/EXCLUDE RULES
# ***IMPORTANT NOTES ABOUT "DENY" RULES***:
# - deny rules do NOT affect read access. They only apply to write access.
#
# - when using deny rules, the order of your rules starts to matter, where
# earlier it did not. The first matching rule applies, where "matching" is
# defined as either permitting the operation you're attempting (`W` or `+`),
# which results in success, or a "deny" (`-`), which results in failure.
# (As before, a fallthrough also results in failure).
# in the example above, you cannot easily say "anyone can write any tag,
# except version tags can only be written by junio". The following might look
# like it works but it doesn't:
# RW refs/tags/v[0-9] = junio
# RW refs/tags/ = junio linus pasky @others
# if you use "deny" rules, however, you can do this (a "deny" rule just uses
# "-" instead of "R" or "RW" or "RW+" in the permission field)
RW refs/tags/v[0-9] = junio
- refs/tags/v[0-9] = linus pasky @others
RW refs/tags/ = junio linus pasky @others
# FILE/DIR NAME BASED RESTRICTIONS
# --------------------------------
# Here's a hopefully self-explanatory example. Assume the project has the
# following contents at the top level: a README, a "doc/" directory, and an
# "src/" directory.
repo foo
RW+ = lead_dev # rule 1
RW = dev1 dev2 dev3 dev4 # rule 2
RW NAME/ = lead_dev # rule 3
RW NAME/doc/ = dev1 dev2 # rule 4
RW NAME/src/ = dev1 dev2 dev3 dev4 # rule 5
# Notes
# - the "NAME/" is part of the syntax; think of it as a keyword if you like.
# The rest of it is treated as a refex to match against each file being
# touched (see "SPECIFYING AND USING A REFEX" above for details)
# - file/dir NAME-based restrictions are *in addition* to normal (branch-name
# based) restrictions; they are not a *replacement* for them. This is why
# rule #2 (or something like it, maybe with a more specific branch-name) is
# needed; without it, dev1/2/3/4 cannot push any branches.
# - if a repo has *any* NAME/ rules, then NAME-based restrictions are checked
# for *all* users. This is why rule 3 is needed, even though we don't
# actually have any NAME-based restrictions on lead_dev. Notice the pattern
# on rule 3.
# - *each* file touched by the commits being pushed is checked against those
# rules. So, lead_dev can push changes to any files, dev1/2 can push
# changes to files in "doc/" and "src/" (but not the top level README), and
# dev3/4 can only push changes to files in "src/".
# GITWEB AND DAEMON STUFF
# -----------------------
# No specific syntax for gitweb and daemon access; just make the repo readable
# ("R" access) to the special users "gitweb" and "daemon"
# make "@oss_repos" (all 7 of them!) accessible via git daemon
repo @oss_repos
R = daemon
# make the two *large* repos accessible via gitweb
repo linux perl
R = gitweb
# REPO OWNER/DESCRIPTION LINE FOR GITWEB
# syntax, one of:
# reponame = "some description string in double quotes"
# reponame "owner name" = "some description string in double quotes"
# note: setting a description also gives gitweb access; you do not have to
# give gitweb access as described above if you're specifying a description
gitolite "Sitaram Chamarty" = "fast, secure, access control for git in a corporate environment"
# REPO SPECIFIC GITCONFIG
# -----------------------
# update 2010-02-06; this won't work unless the rc file has the right
# settings; please see comments around the variable $GL_GITCONFIG_KEYS in
# conf/example.gitolite.rc for details and security information.
# (Thanks to teemu dot matilainen at iki dot fi)
# this should be specified within a "repo" stanza
# syntax:
# config sectionname.keyname = [optional value_string]
# example usage: if you placed a hook in hooks/common that requires
# configuration information that is specific to each repo, you could do this:
repo gitolite
config hooks.mailinglist = gitolite-commits@example.tld
config hooks.emailprefix = "[gitolite] "
config foo.bar = ""
config foo.baz =
# This does either a plain "git config section.key value" (for the first 3
# examples above) or "git config --unset-all section.key" (for the last
# example). Other forms (--add, the value_regex, etc) are not supported.
# INCLUDE SOME OTHER FILE
# -----------------------
include "foo.conf"
# this includes the contents of $GL_ADMINDIR/conf/foo.conf here
# Notes:
# - the include statement is not allowed inside delegated fragments for
# security reasons.
# - you can also use an absolute path if you like, although in the interests
# of cloning the admin-repo sanely you should avoid doing this!
# EXTERNAL COMMAND HELPERS -- RSYNC
# ---------------------------------
# If $RSYNC_BASE is non-empty, the following config entries come into play
# (otherwise they are ignored):
# a "fake" git repository to collect rsync rules. Gitolite does not
# auto-create any repo whose name starts with EXTCMD/
repo EXTCMD/rsync
# grant permissions to files/dirs within the $RSYNC_BASE tree. A leading
# NAME/ is required as a prefix; the actual path starts after that. Matching
# follows the same rules as given in "FILE/DIR NAME BASED RESTRICTIONS" above
RW NAME/ = sitaram
RW NAME/foo/ = user1
R NAME/bar/ = user2
# just to remind you that these are perl regexes, not shell globs
RW NAME/baz/.*/*.c = user3