# gitolite installatation

In this document:

  * <a href="#_please_read_this_first">please read this first</a>
      * <a href="#_important_notes">important notes</a>
      * <a href="#_conventions_used">conventions used</a>
      * <a href="#_requirements">requirements</a>
          * <a href="#_client_workstation">client/workstation</a>
          * <a href="#_server">server</a>
          * <a href="#_technical_skills">technical skills</a>
  * <a href="#_installation_and_setup">installation and setup</a>
      * <a href="#_install_methods_and_deciding_which_one_to_use">install methods and deciding which one to use</a>
      * <a href="#_package_method_directly_on_the_server_using_RPM_DEB">(package method) directly on the server, using RPM/DEB</a>
      * <a href="#_root_method_directly_on_the_server_manually_with_root_access">(root method) directly on the server, manually, with root access</a>
      * <a href="#_non_root_method_directly_on_the_server_manually_without_root_access">(non-root method) directly on the server, manually, without root access</a>
      * <a href="#_from_client_method_install_from_the_client_to_the_server">(from-client method) install from the client to the server</a>
  * <a href="#_URLs_for_gitolite_managed_repos">URLs for gitolite-managed repos</a>
  * <a href="#_special_cases_multiple_gitolite_servers">special cases -- multiple gitolite servers</a>
      * <a href="#_package_method_and_root_method">package method and root method</a>
      * <a href="#_from_client_method">from-client method</a>
  * <a href="#_upgrading">upgrading</a>
  * <a href="#_uninstalling">uninstalling</a>
      * <a href="#_cleaning_out_a_botched_install">cleaning out a botched install</a>
      * <a href="#_uninstalling_gitolite_completely">uninstalling gitolite completely</a>

----

<a name="_please_read_this_first"></a>

### please read this first

<a name="_important_notes"></a>

#### important notes

Please make sure you understand the following points first.

  * gitolite runs as a single user on a server, and is invoked via ssh.  Thus,
    every user on the server is a potential "gitolite host".

  * gitolite depends **heavily** on ssh pubkey (passwordless) access.  Do not
    assume you know all about ssh -- most people **don't**.  If in doubt, use
    a dedicated userid on both client and server for installation and
    administration of gitolite.

    To make matters worse, ssh problems in gitolite don't always look like ssh
    problems.  See [doc/ssh-troubleshooting.mkd][doc6] for help.

A gitolite setup has:

  * a server
  * a "hosting user" on the server -- the userid under which gitolite runs.
    You can have any number of "hosting users" on one server; in fact every
    user can host their own gitolite instance
  * an "admin user" -- the user who sets up gitolite and configures it
  * the admin user's client or workstation, from which he does all his work

It is possible to have the server and the client be the same machine, and even
the admin user be also the hosting user, (i.e., `sitaram@server` can install
and administer a gitolite setup running under `sitaram@server`, a situation
that is common with some hosting services).  It's actually fairly easy and
**safe** to do, **as long as you have password access to the server** for
emergency use.  However, I will not be documenting it because (a) if you know
ssh you'll know how to extrapolate my instructions to do this and (b) if you
don't know ssh it'll be a nightmare to support you.

<a name="_conventions_used"></a>

#### conventions used

Throughout the documentation, we use "sitaram" as the admin user, and his
workstation is called "client".  The hosting user is "git", and the server is
called "server".  **Please substitute your values as needed**.

Also, we often say "the rc file".  This means `~/.gitolite.rc` on the server.
And when we say the "access control rules", or "conf file", or "config file",
we mean `conf/gitolite.conf` on your gitolite-admin clone.

<a name="_requirements"></a>

#### requirements

<a name="_client_workstation"></a>

##### client/workstation

  * git version 1.6.2 or greater
      * even msysgit on Windows is fine; please don't ask me for help if
        you're using putty, plink, puttygen, etc., for ssh; I recommend
        msysgit for Windows and the openssh that comes with it
  * if you're using the "from-client" method of install (see below), the bash
    shell is needed
      * again, msysgit on Windows is fine

<a name="_server"></a>

##### server

  * any Unix system with a posix compatible "sh".
      * people using "csh" or derivatives please don't ask me for help -- tell
        your admin csh is not posix compatible
  * git version 1.6.2 or greater
      * can be in a non-PATH location if you are unable to install it
        normally; see the `$GIT_PATH` variable in the "rc" file
  * perl (but since git requires it anyway, you probably have it)
  * openssh or any ssh that can understand the `authorized_keys` file format

<a name="_technical_skills"></a>

##### technical skills

  * if you're installing gitolite, you're a "system admin", like it or not.
    Ssh is therefore a necessary skill.  Please take the time to learn at
    least enough to get passwordless access working.

  * you also need to be somewhat familiar with git itself.  You cannot
    administer a whole bunch of git repositories if you don't know the basics
    of git.

  * some familiarity with Unix and shells is probably required

  * regular expressions are a big part of gitolite in many places but
    familiarity is not necessary to do basic access control.

<a name="_installation_and_setup"></a>

### installation and setup

<a name="methods"></a>

<a name="_install_methods_and_deciding_which_one_to_use"></a>

#### install methods and deciding which one to use

Gitolite has 4 install methods:

  * **package method** if you have a gitolite RPM or a DEB available
  * **root method** if you have root access to the server, and you plan to
    have multiple "hosting users" on it
  * **non-root method** if you don't have root access to the server, but you
    do have at least one account with a password
  * **from-client method** if you are not comfortable with public keys and
    server side commands

Here's how you install using these 3 methods.  Future upgrades are equally
easy -- the steps required for upgrading are marked "(U)".

<a name="_package_method_directly_on_the_server_using_RPM_DEB"></a>

#### (package method) directly on the server, using RPM/DEB

  * from your workstation, copy your `~/.ssh/id_rsa.pub` file to the server.
    Put it in `/tmp/sitaram.pub`.

  * (U) on the server, as root, do the install (urpmi, yum, apt-get, etc.).

  * on the server, "su - git", then as "git" user, run `gl-setup
    /tmp/sitaram.pub`.

  * on the client, run `cd; git clone git@server:gitolite-admin`

<a name="_root_method_directly_on_the_server_manually_with_root_access"></a>

#### (root method) directly on the server, manually, with root access

  * from your workstation, copy your `~/.ssh/id_rsa.pub` file to the server.
    Put it in `/tmp/sitaram.pub`.

  * (U) on the server, as root, do the following:

        cd $HOME
        git clone git://github.com/sitaramc/gitolite gitolite-source
        cd gitolite-source
        # now checkout whatever branch you want; for early adopters I suggest
        # "pu", as in "git checkout -t origin/pu" for recent gits
        mkdir -p /usr/local/share/gitolite/conf /usr/local/share/gitolite/hooks
        src/gl-system-install /usr/local/bin /usr/local/share/gitolite/conf /usr/local/share/gitolite/hooks

  * on the server, "su - git", then as "git" user, run `gl-setup
    /tmp/sitaram.pub`.

  * on the client, run `cd; git clone git@server:gitolite-admin`

<a name="_non_root_method_directly_on_the_server_manually_without_root_access"></a>

#### (non-root method) directly on the server, manually, without root access

WARNING: if you use this method you'd better know enough about ssh to be able
to keep your keys straight, and you'd also better have password access to the
server so that if you screw up the keys you can still get on, or be able to
"su - git" from some other user on the server.

  * from your workstation, copy your `~/.ssh/id_rsa.pub` file to the server.
    Put it in `/tmp/sitaram.pub`.

  * if `$HOME/bin` is not on the default PATH, fiddle with your `.bashrc` or
    `.bash_profile` or similar files and add it somehow.

  * (U) on the server, as "git", do the following:

        cd $HOME
        git clone git://github.com/sitaramc/gitolite gitolite-source
        # now checkout whatever branch you want; for early adopters I suggest
        # "pu", as in "git checkout -t origin/pu" for recent gits
        cd gitolite-source
        mkdir -p $HOME/bin $HOME/share/gitolite/conf $HOME/share/gitolite/hooks
        src/gl-system-install $HOME/bin $HOME/share/gitolite/conf $HOME/share/gitolite/hooks

  * on the server, still as "git", run `gl-setup /tmp/sitaram.pub`.

  * on the client, run `cd; git clone git@server:gitolite-admin`

<a name="fc"></a>

<a name="_from_client_method_install_from_the_client_to_the_server"></a>

#### (from-client method) install from the client to the server

The advantage of this method is that it forces you to solve the ssh pubkey
problem **before** attempting to install.  It works best if you have dedicated
userids, one on the server for installing gitolite, and one the client for
administering it.

Sadly, it also forces the admin to use a different URL to access gitolite
repos than normal users, which seems to confuse a heck of a lot of people who
don't read the prominently displayed messages and/or the documentation.

This method is verbosely documented in this [transcript][], including
*outputs* of the commands concerned.

<a name="_URLs_for_gitolite_managed_repos"></a>

### URLs for gitolite-managed repos

The URL for normal users (i.e., users other than the admin) is always of the
form "git@server:reponame".  So, for instance, `git clone git@server:testing`
gets any valid user a copy of the "testing" repo.

In the first 3 install methods, the admin user will also use the same URL
format, like `git clone git@server:gitolite-admin`.

However, in the fourth ("from-client") method, the admin user needs a
different URL (`gitolite:reponame`) to gain access to the gitolite
repositories.  Check [here][twokeys] for why.

<a name="_special_cases_multiple_gitolite_servers"></a>

### special cases -- multiple gitolite servers

<a name="_package_method_and_root_method"></a>

#### package method and root method

With the first two methods of installation, it's trivial to create multiple
gitolite instances (say one for each department, on some mega company-wide
server).  You can even do this without giving shell access to the admins.
Here's an example with just two "departments", and their admins Alice and Bob:

  * create userids `webbrowser_repos` and `webserver_repos`
  * ask Alice and Bob for their pubkeys; copy them to the respective home
    directories for convenience
  * run `su - webbrowser_repos`, then `gl-setup alice.pub`
  * (similarly with `webserver_repos` and `bob.pub`, and so on for others)

That's it.  The URL for all web browser projects is now something like
`webbrowser_repos@server:reponame`, and similarly for the others.

Notice that you only have to do this once for each "department", and it's
really just one command after creating the userid.  None of these admins need
to have a command line on the server, so don't give them the passwords if you
don't need to -- the pubkey will allow them to be gitolite admins on their
domain, and that's quite enough for normal operations.

<a name="_from_client_method"></a>

#### from-client method

Thanks to Matt Perzel, the easy-install command now takes an optional 4th
parameter, which is the "nickname" of the gitolite server.  It gets defined in
`~/.ssh/config`, and if not used it defaults to "gitolite".

So if you used the following command to install gitolite to 2 different
servers:

    ./src/gl-easy-install -q git my.1st.git.server admin_user1 gitolite_server_1
    ./src/gl-easy-install -q git my.2nd.git.server admin_user1 gitolite_server_2

you will find that `~/gitolite_server_1-admin` and `~/gitolite_server_2-admin`
have been created as respective clones.  Or you can re-clone elsewhere:

    cd ~/admin1; git clone gitolite_server_1:gitolite-admin.git
    cd ~/admin2; git clone gitolite_server_2:gitolite-admin.git

<a name="_upgrading"></a>

### upgrading

Upgrading gitolite is easy.  In each method above, just re-do the step that is
marked "(U)".  Also, if you're using either of the two methods that use the
`src/gl-system-install` command, please make sure you give it the same
arguments!

If you've added any new hooks, please also run the next step (`gl-setup`)
also.

Also, remember that some new features may require additional settings in your
`~/.gitolite.rc` file.

<a name="_uninstalling"></a>

### uninstalling

<a name="_cleaning_out_a_botched_install"></a>

#### cleaning out a botched install

When people have trouble installing gitolite, they often try to change a bunch
of things manually on the server.  This usually makes things worse ;-) so
here's how to clean the slate.

  * client-side
      * edit `~/.ssh/config` and delete the paragraph starting with `host
        gitolite`, if present.
      * remove `~/gitolite-admin`
  * server-side
      * edit `~/.ssh/authorized_keys` and delete all lines between `# gitolite
        start` and `# gitolite end` inclusive.
      * remove `~/.gitolite`, `~/.gitolite.rc` and
        `~/repositories/gitolite-admin.git`

<a name="_uninstalling_gitolite_completely"></a>

#### uninstalling gitolite completely

There's some duplication between this and the previous section, but
uninstalling gitolite is described in great detail in
[doc/uninstall.mkd][doc9unin]

----

[doc6]: http://github.com/sitaramc/gitolite/blob/pu/doc/ssh-troubleshooting.mkd
[doc9unin]: http://github.com/sitaramc/gitolite/blob/pu/doc/uninstall.mkd
[twokeys]: http://github.com/sitaramc/gitolite/blob/pu/doc/ssh-troubleshooting.mkd#twokeys
[transcript]: http://github.com/sitaramc/gitolite/blob/pu/doc/install-transcript.mkd