# assorted faqs, tips, and notes on gitolite In this document: * common errors and mistakes * other errors, warnings, notes... * cloning an empty repo * `@all` syntax for repos * features * syntax and normal usage * one user, many keys * security, access control, and auditing * two levels of access rights checking * better logging * delegating parts of the config file * convenience features * what repos do I have access to? * support for git installed outside default PATH * "personal" branches * custom hooks and custom git config * bypassing gitolite * gl-admin-push: bypassing gitolite for the gitolite-admin repo * disabling write access to take backups * INconvenience features * deleting a repo * renaming a repo * helping with gitweb * easier to link gitweb authorisation with gitolite * umask setting * advanced features * repos named with wildcards * admin defined commands * access control for external commands * svnserve * odds and ends * "poking" the admin repo to force a compile * design choices * keeping the parser and the access control separate ---- ### common errors and mistakes * adding `repositories/` at the start of the repo name in the `git clone`. This error is typically made by the *admin* himself -- because he knows what `$REPO_BASE` is set to and thinks he has to provide that prefix on the client side also :-) In fact gitolite prepends `$REPO_BASE` internally, so you shouldn't also do the same thing! * being able to clone but getting errors on push. Most likely caused by a combination of: * you already have shell access to the server, not just "gitolite" access, *and* * you cloned using `git clone git@server:repositories/repo.git` (notice there's an extra "repositories/" in there?) In other words, you used a key that completely bypassed gitolite and went straight to the shell to do the clone. Please see doc/ssh-troubleshooting.mkd for what all this means. ### other errors, warnings, notes... #### cloning an empty repo Cloning an empty repo is only possible with clients greater than 1.6.2. So at least one of your clients needs to have a recent git. Once at least one commit has been made, older clients can also use it When you clone an empty repo, git seems to complain about `fatal: The remote end hung up unexpectedly`. However, you can ignore this, since it doesn't seem to hurt anything. [Update 2009-09-14; this has been fixed in git 1.6.4.3] #### `@all` syntax for repos There *is* a way to use the `@all` syntax for repos also, as described in `doc/gitolite.conf.mkd`. However, there are a couple of minor cautions: * don't use `NAME/` or such restrictions on the special `@all` repo. Due to the potential for defeating a crucial optimisation and slowing down *all* access, we do not support this. ### features Apart from the big ones listed in the top level README, and subjective ones like "better config file format", gitolite has evolved to have many useful features than the original goal of branch-level access control. #### syntax and normal usage ##### one user, many keys If you have a user who has more than one pubkey (like from different machines) the simplest way to deal with it is to add subdirectories and add keys there. For example, I might have these files in `keydir/`: sitaram.pub home/sitaram.pub laptop/sitaram.pub The older method will continue to work, simply because I prefer it. But I am not going to document it except for the example below, nor am I going to support it in terms of questions. Sorry. Apparently it was too complex to understand, even for some smart folks I know. This tells me it was probably ill thought out and should have been obsoleted as soon as e0fe73a was pushed. Anyway, here's *all* the documentation for it -- some sample pubkey filenames and the corresponding derived usernames: * plain username, no multikey sitaramc.pub sitaramc * plain username, with multikeys sitaramc@laptop.pub sitaramc sitaramc@desktop.pub sitaramc * email address as username, no multikey sitaramc@gmail.com.pub sitaramc@gmail.com * email address as username, with multikeys sitaramc@gmail.com@laptop.pub sitaramc@gmail.com sitaramc@gmail.com@desktop.pub sitaramc@gmail.com #### security, access control, and auditing ##### two levels of access rights checking Gitolite has two levels of access checks. The **first check** is what I will call the **pre-git** level. At this stage, the `gl-auth-command` has been invoked by `sshd`, and it knows just three things: * who, * what repository, and * what type of access (R or W) Note that at this point no git program has entered the picture, and we have no way of knowing what **ref** (branch, tag, etc) he is trying to update, even if it is a "write" operation. For a "read" operation to pass this check, the username (or `@all` users) must have read permission (i.e., R, RW, RW+, etc.) on at least one branch of the repo (or `@all` repos). For a "write" operation, there is an additional restriction: lines specifying only `R` (read access) don't count. *The user must have write access to **some** ref in the repo in order to pass this stage!* The **second check** is via a git `update hook`. This check only happens for write operations. By this time we know what "ref" he is trying to update, as well as the old and the new SHAs of that ref (by which we can also deduce whether it's a rewind or not). This is where the "per-branch" permissions come into play. Each refex that allows `W` access (or `+` if this is a rewind) for *this* user, on *this* repo, is matched against the actual refname being updated. If any of the refexes match, the push succeeds. If none of them match, it fails. Gitolite also allows "exclude" or "deny" rules. See later in this document for details. ##### better logging If you have been too liberal with the permission to rewind, it has built-in logging as an emergency fallback if someone goes too far, or for audit purposes [`*`]. The logfile names and location are configurable, and can include the year/month/day etc in the filename for easy archival or further processing. The log file even tells you which pattern in the config file matched to allow that specific access to proceed. > [`*`] setting `core.logAllRefUpdates true` does provide a safety net > against over-zealous rewinds, but it does not tell you "who". And > strangely, management does not seem to share the view that "blame" is just > a synonym for "annotate" ;-)] The log lines look like this: 2009-09-19.10:24:37 + b4e76569659939 4fb16f2a88d8b5 myrepo refs/heads/master user2 refs/heads/master The "+" at the start indicates a non-fast forward update, in this case from b4e76569659939 to 4fb16f2a88d8b5. So b4e76569659939 is the one to restore! Can it get easier? The other parts of the log line are the name of the repo, the refname being updated, the user updating it, and the refex pattern (from the config file) that matched, in case you need to debug the config file itself. ##### delegating parts of the config file You can now split up the config file and delegate the authority to specify access control for their own pieces. See [delegation][] for details. #### convenience features ##### what repos do I have access to? Sometimes there are too many repos, maybe even named similarly, or with the potential for typos, confusion about hyphens/underscores or upper/lower case, etc. You'd just like a simple way to know what repos you have access to. Gitolite provides two commands (`info` and `expand`) to help you find this information; please check [doc/report-output.mkd][repout] for details. ##### support for git installed outside default PATH The normal solution is to add to the system default PATH somehow, either by munging `/etc/profile` or by enabling `PermitUserEnvironment` in `/etc/ssh/sshd_config` and then setting the PATH in `~/.ssh/.environment`. All these are security risks because they allow a lot more than just you and your git install :-) And if you don't have root, you can't do this anyway. The only solution till now has been to ask every client to set the config parameters `remote..receivepack` and `remote..uploadpack`. But telling *every* client to do so is a pain... Gitolite lets you specify the directory in which git binaries are to be found, via a new variable (`$GIT_PATH`) in the "rc" file. If this variable is non-empty, it will be appended to the PATH environment variable before attempting to run git stuff. Very easy, very simple, and completely transparent to the users :-) **Note**: sometimes you have a system that already has an older "git" installed in one of the system PATHs, but you've installed a newer git in some non-standard location and want that picked up. Because of security reasons, gitolite will not prepend `GIT_PATH` to the PATH variable, so the older git comes first and it gets kinda frustrating! Here's a simple workaround. Ignore the `GIT_PATH` variable, and directly set the full PATH in the rc file, like so: $ENV{PATH} = "/home/sitaram/bin:$ENV{PATH}"; ##### "personal" branches "personal" branches are great for corporate environments, where unauthenticated pull/clone is a no-no. Since a dev workstation cannot do authentication, even work shared just between 2 devs has to go *via* the server. This causes the same branch name clutter as in a centralised VCS, plus setting up permissions for this becomes a chore for the admin. gitolite lets you define a "personal" or "scratch" namespace prefix for each developer (e.g., `refs/personal//*`). Just add a line like: RW+ personal/USER/ = @userlist This means I (user "sitaram") can do anything to any branch whose name starts with `personal/sitaram/` assuming I'm in "userlist". You can have any number of such lines with different prefixes (for example, using topic names instead of "personal") or even suffixes if you like. The important thing is that the "branch" name should contain `/USER/` (including the slashes). At runtime this will match whoever is the current user. Access is still determined by the right hand side of course. ##### custom hooks and custom git config You can specify hooks that you want to propagate to all repos, as well as per-repo "gitconfig" settings. Please see `doc/2-admin.mkd` and `doc/gitolite.conf.mkd` for details. ##### bypassing gitolite Sometimes you'll need to access one of the gitolite-managed repos directly on the server, without going through gitolite. Reasons may be some automatic updates or some other ad hoc purposes you can dream up. Cloning a gitolite-controlled repo is easy enough -- just use the full path (typically `~/repositories/reponame.git`) instead of just `reponame`, to compensate for gitolite not sitting in between and adding those things to the repo path. But when you push, the update hook (which git will invoke anyway) will fail because it needs all sorts of access control info that it now doesn't have, because the push was invoked without going through gitolite. In order to bypass the update hook, just set the `GL_BYPASS_UPDATE_HOOK` environment variable to "1" or something, export it, and push. I prefer not to set that variable permanently, preferring this mode instead: GL_BYPASS_UPDATE_HOOK=1 git push ##### gl-admin-push: bypassing gitolite for the gitolite-admin repo The method described in the previous section (setting `GL_BYPASS_UPDATE_HOOK`) will work for all the repos managed by gitolite, **except** for the special `gitolite-admin` repo. For that you will need some extra magic, because there is also a `post-update` hook that runs here, and this needs additional information which is NOT available if you bypass gitolite. Use the `gl-admin-push` program to make changes to the admin repo directly on the server. Here's how: * clone the repo to some safe location and cd to it: cd /tmp git clone ~/repositories/gitolite-admin.git cd gitolite-admin * make whatever changes you want to that clone and commit. You can add new keys, change the conf file, or anything at all that needs fixing up. You can even reset to an older commit (rewind) if that is the simplest way to fix up some config problem that may have lost you your access. * when done, instead of `git push `, use this program instead, like so: gl-admin-push Note that this method will work for *any* repo, not just the special admin repo. ##### disabling write access to take backups If you want to take normal, OS-level, backups of the system, you might want git to be quiescent during that time, so that the backup is clean. The best way to do this is to disable write-access to the server for the duration of the backup. Here's how: cd $HOME # if running as "git" user, else "cd ~git" or whatever echo writes disabled during backup window > .gitolite.down # << RUN YOUR BACKUP COMMAND(s) HERE >> rm .gitolite.down I leave it to you to * make sure that if the backup script fails, the `.gitolite.down` file is still removed (or not; maybe your policy is that if the backup failed, no further writes are allowed. Whatever...) * if you're extremely paranoid (even I wouldn't worry about this!) make sure that no push is *in progress* by checking for any `git-receive-pack` processes in a `ps` output. #### INconvenience features ##### deleting a repo By design, there is no code in gitolite to *delete* a repo if the repo was specified by name in the config file. (Wildcard repos *can* be deleted by the user; see [here][rmrepo] for details). If you *do* want to permanently delete a *non*-wildcard repo, here's what you do: * remove the repo from the gitolite-admin repo clone's `conf/gitolite.conf` file. "add" the change, commit, and push. * *then* remove the repo from `~/repositories` on the server (or whatever you set `$GL_REPO_BASE` to in the `~/.gitolite.rc`) ##### renaming a repo This is similar; there's no code to do this in gitolite. What you do is: * log on to the server, `cd $REPO_BASE` (default: `cd ~/repositories`), and `mv old-name.git new-name.git` * back on your gitolite-admin clone, edit `conf/gitolite.conf` and replace all occurrences of `old-name` with `new-name`. Then add, commit, and push as usual. The order of these 2 steps is important; do not reverse them :-) #### helping with gitweb Although gitweb is a completely separate program, gitolite can do quite a lot to help you manage gitweb access as well; once the initial setup is complete, you can do it all from within the gitolite config file! If you just want gitweb to show some repositories, see [gwd] for how to specify which repos to show. Other advanced uses are described here. [gwd]: http://sitaramc.github.com/gitolite/doc/2-admin.html#gwd ##### easier to link gitweb authorisation with gitolite Over and above whether a repo is even *shown* by gitweb, you may want to further restrict people, allowing them to view *only* those repos for which they have been given read access by gitolite. This requires that: * you have to have some sort of HTTP auth on your web server (out of my scope, sorry!) * the HTTP auth should use the same username (like "sitaram") as used in the gitolite config (for the corresponding user) Normally a superuser sets up passwords for users using the "htpasswd" command, but this is an administrative chore. Robin Smidsrød had the *great* idea that, since each user already has pubkey access to `git@server`, this gives us a very neat way of using gitolite to let the users *manage their own HTTP passwords*. Here's how: * setup apache so that the htaccess file it looks for is owned by the "git" user * in the `~/.gitolite.rc` file, look for the variable `$HTPASSWD_FILE` and point it to this file * tell your users to type in `ssh git@server htpasswd` to set or change their HTTP passwords Of course some other authentication method can be used (e.g. `mod_ldap`) as long as the usernames match. Gitweb allows you to specify a subroutine to decide on access. We use that feature and tie it to gitolite. Configuration example can be found in `contrib/gitweb/`. ##### umask setting Gitweb not able to read your repos? You can change the umask for newly created repos to something more relaxed -- see the `REPO_UMASK` setting in the [`~/.gitolite.rc`][rc] file. [rc]: http://sitaramc.github.com/gitolite/doc/gitolite.rc.html #### advanced features ##### repos named with wildcards Please see `doc/wildcard-repositories.mkd` for all the details. ##### admin defined commands This requires the wildcards feature to be enabled, but is then an extremely powerful feature. See `doc/admin-defined-commands.mkd`. ##### access control for external commands Gitolite now has a mechanism for allowing access control for arbitrary external commands, as long as they are invoked via ssh and present a server-side command that contains enough information to make an access control decision. Note that this is incompatible with giving people shell access as described in `doc/ssh-troubleshooting.mkd` -- people who have shell access are not subject to this mechanism (it wouldn't make sense to try and control someone who has shell access anyway). In general, external commands require changes in one or both the config files; the sample files in `conf/` double as documentation, so you should look there for examples and usage. Commands implemented so far are: * rsync * svnserve (see next section for a brief description; this has been contributed by Simon and Vladimir) ###### svnserve If you are transitioning from SVN to gitolite, and have a lot of users using public-key authentication with SVN, this feature may be useful to you. Once you migrate all users' public keys into gitolite, you can set the `$SVNSERVE` variable in `~/.gitolite.rc` to tie `svnserve` with gitolite's authentication system. Assuming you installed gitolite to the same user as the one you used for SVN, SVN connectivity will be retained, and users will be able to use both SVN and git using the same SSH configuration. ### odds and ends #### "poking" the admin repo to force a compile Sometimes you need to force a compile, as if you pushed the gitolite-admin repo. I have a git alias that looks like this: [alias] poke = !git ls-remote origin | grep -w refs/heads/poke && git push origin :poke || git push origin master:poke so I just run `git poke`. This toggles between deleting and creating a dummy branch called "poke". Either operation will trigger the hooks. ### design choices #### keeping the parser and the access control separate There are two programs concerned with access control: * `gl-auth-command`, the program that is run via `~/.ssh/authorized_keys`; this decides whether git should even be allowed to run (basic R/W/no access). (This one cannot decide on the branch-level access; it is not known at this point what branch is being accessed) * the update-hook on each repo, which decides the per-branch permissions I have chosen to keep the relatively complex task of parsing the config file out of them to keep them simpler (and faster). So any changes to the config have to be first "compiled", and the access control programs use this "compiled" version of the config. (The compile step also refreshes `~/.ssh/authorized_keys`). [repout]: http://sitaramc.github.com/gitolite/doc/report-output.html [delegation]: http://sitaramc.github.com/gitolite/doc/delegation.html [rmrepo]: http://sitaramc.github.com/gitolite/doc/admin-defined-commands.html#rmrepo