# assorted faqs, tips, and notes on gitolite In this document: * common errors and mistakes * git version dependency * other errors, warnings, notes... * ssh-copy-id * cloning an empty repo * `@all` syntax for repos * umask setting * getting a tar file from a clone * features * syntax and normal usage * simpler syntax * one user, many keys * security, access control, and auditing * two levels of access rights checking * better logging * "exclude" (or "deny") rules * separating delete and rewind rights * file/dir NAME based restrictions * delegating parts of the config file * convenience features * what repos do I have access to? * error checking the config file * including config lines from other files * support for git installed outside default PATH * "personal" branches * custom hooks and custom git config * helping with gitweb * easier to specify gitweb "description" and gitweb/daemon access * easier to link gitweb authorisation with gitolite * advanced features * repos named with wildcards * admin defined commands * access control for external commands * design choices * keeping the parser and the access control separate ## common errors and mistakes * adding `repositories/` at the start of the repo name in the `git clone`. This error is typically made by the *admin* himself -- because he knows what `$REPO_BASE` is set to and thinks he has to provide that prefix on the client side also :-) In fact gitolite prepends `$REPO_BASE` internally, so you shouldn't also do the same thing! * being able to clone but getting errors on push. Most likely caused by a combination of: * you already have shell access to the server, not just "gitolite" access, *and* * you cloned using `git clone git@server:repositories/repo.git` (notice there's an extra "repositories/" in there?) In other words, you used a key that completely bypassed gitolite and went straight to the shell to do the clone. Please see doc/6-ssh-troubleshooting.mkd for what all this means. ## git version dependency Gitolite (on the server) now refuses to run if git is not at least 1.6.2. ## other errors, warnings, notes... ### ssh-copy-id don't have `ssh-copy-id`? This is broadly what that command does, if you want to replicate it manually. The input is your pubkey, typically `~/.ssh/id_rsa.pub` from your client/workstation. * it copies it to the server as some file * it appends that file to `~/.ssh/authorized_keys` on the server (creating it if it doesn't already exist) * it then makes sure that all these files/directories have go-w perms set (assuming user is "git"): /home/git/.ssh/authorized_keys /home/git/.ssh /home/git [Actually, `sshd` requires that even directories *above* `~` (`/`, `/home`, typically) also must be `go-w`, but that needs root. And typically they're already set that way anyway. (Or if they're not, you've got bigger problems than gitolite install not working!)] ### cloning an empty repo Cloning an empty repo is only possible with clients greater than 1.6.2. So at least one of your clients needs to have a recent git. Once at least one commit has been made, older clients can also use it When you clone an empty repo, git seems to complain about `fatal: The remote end hung up unexpectedly`. However, you can ignore this, since it doesn't seem to hurt anything. [Update 2009-09-14; this has been fixed in git 1.6.4.3] ### `@all` syntax for repos There *is* a way to use the `@all` syntax for repos also, as described in `conf/example.conf`. However, there are a couple of minor cautions: * don't use `NAME/` or such restrictions on the special `@all` repo. Due to the potential for defeating a crucial optimisation and slowing down *all* access, we do not support this. * don't try giving `@all` users some permission for `@all` repos ### umask setting Gitweb not able to read your repos? You can change the umask for newly created repos to something more relaxed -- see the `~/.gitolite.rc` file ## getting a tar file from a clone You can clone the repo from github or indefero, then execute a make command to extract a tar file of the branch you want. Please use the make command, not a plain "git archive", because the Makefile adds a file called `.GITOLITE-VERSION` that will help you identify which version you are using. git clone git://github.com/sitaramc/gitolite.git # (OR) git clone git://sitaramc.indefero.net/sitaramc/gitolite.git cd gitolite make master.tar # or maybe "make pu.tar" ## features Apart from the big ones listed in the top level README, and subjective ones like "better config file format", gitolite has evolved to have many useful fearures than the original goal of "gitosis + branch-level access control". ### syntax and normal usage #### simpler syntax The basic syntax is simpler and cleaner but it goes beyond that: **you can specify access in bits and pieces**, even if they overlap. Some access needs are best grouped by repo, some by username, and some by both. So just do all of them, and gitolite will combine all the access lists! Here's an example: # define groups of people @bosses = phb1 phb2 phb3 @devs = dev1 dev2 dev3 @interns = int1 int2 int3 # define groups of projects @open = git gitolite linux rakudo @closed = c1 c2 c3 @topsecret = ts1 ts2 ts3 # all bosses have read access to all projects repo @open @closed @topsecret R = @bosses # everyone has read access to "open" projects repo @open R = @bosses @devs @interns [...or any other combination you want...] # later in the file: # specify access for individual repos (like RW, RW+, etc) repo c1 [...] [...etc...] If you notice that `@bosses` are given read access to `@open` via both rules, do not worry that this causes some duplication or inefficiency. It doesn't :-) See the "specify gitweb/daemon access" section below for one more example. #### one user, many keys I have a laptop and a desktop I need to access the server from. I have different private keys on them, but as far as gitolite is concerned both of them should be treated as "sitaram". How does this work? In gitosis, the admin creates a single "sitaram.pub" containing one line for each of my pubkeys. In gitolite, we keep them separate: "sitaram@laptop.pub" and "sitaram@desktop.pub". The part before the "@" is the username, so gitolite knows these two keys belong to the same person. Note that you don't say "sitaram@laptop" and so on in the **config** file -- as far as the config file is concerned there's just **one** user called "sitaram" -- so you only say "sitaram" there. I think this is easier to maintain if you have to delete or change one of those keys. However, now that `sitaramc@gmail.com` is also a valid username, we need to distinguish between `sitaramc@gmail.com.pub` and `sitaramc@desktop.pub`. We do that by requiring that the multi-key suffix you use (like "desktop" and "laptop") should not have a `"."` in it. If it does, it looks like an email address. The following table lists sample pubkey filenames and the corresponding derived usernames (which is what goes into the `conf/gitolite.conf` file): * old style multikeys; not mistaken for emails because there is no "." in hostname part sitaramc.pub sitaramc sitaramc@laptop.pub sitaramc sitaramc@desktop.pub sitaramc * new style, email keys; there is a "." in hostname part; so it's an email address sitaramc@gmail.com.pub sitaramc@gmail.com * multikeys *with* email address sitaramc@gmail.com@laptop.pub sitaramc@gmail.com sitaramc@gmail.com@desktop.pub sitaramc@gmail.com ### security, access control, and auditing #### two levels of access rights checking Gitolite has two levels of access checks. The **first check** is what I will call the **pre-git** level (this is the only check that gitosis has). At this stage, the `gl-auth-command` has been invoked by `sshd`, and it knows just three things: * who, * what repository, and * what type of access (R or W) Note that at this point no git program has entered the picture, and we have no way of knowing what **ref** (branch, tag, etc) he is trying to update, even if it is a "write" operation. For a "read" operation to pass this check, the username (or `@all`) must have read permission (i.e., R, RW, or RW+) on at least one branch of the repo. For a "write" operation, there is an additional restriction: lines specifying only `R` (read access) don't count. *The user must have write access to **some** ref in the repo in order to pass this stage!* The **second check** is via a git `update hook`. This check only happens for write operations. By this time we know what "ref" he is trying to update, as well as the old and the new SHAs of that ref (by which we can also deduce whether it's a rewind or not). This is where the "per-branch" permissions come into play. Each refex that allows `W` access (or `+` if this is a rewind) for *this* user, on *this* repo, is matched against the actual refname being updated. If any of the refexes match, the push succeeds. If none of them match, it fails. Gitolite also allows "exclude" or "deny" rules. See later in this document for details. #### better logging If you have been too liberal with the permission to rewind, it has built-in logging as an emergency fallback if someone goes too far, or for audit purposes [`*`]. The logfile names and location are configurable, and can include the year/month/day etc in the filename for easy archival or further processing. The log file even tells you which pattern in the config file matched to allow that specific access to proceed. > [`*`] setting `core.logAllRefUpdates true` does provide a safety net > against over-zealous rewinds, but it does not tell you "who". And > strangely, management does not seem to share the view that "blame" is just > a synonym for "annotate" ;-)] The log lines look like this: 2009-09-19.10:24:37 + b4e76569659939 4fb16f2a88d8b5 myrepo refs/heads/master user2 refs/heads/master The "+" at the start indicates a non-fast forward update, in this case from b4e76569659939 to 4fb16f2a88d8b5. So b4e76569659939 is the one to restore! Can it get easier? The other parts of the log line are the name of the repo, the refname being updated, the user updating it, and the refex pattern (from the config file) that matched, in case you need to debug the config file itself. #### "exclude" (or "deny") rules Here is an illustrative explanation of "deny" rules. However, please be sure to read the "DENY/EXCLUDE RULES" section in `conf/example.conf` for important notes/caveats before using "deny" rules. Take a look at the following snippet, which *seems* to say that "bruce" can write versioned tags (anything containing `refs/tags/v[0-9]`), but the other staffers can't: @staff = bruce whitfield martin [... and later ...] RW refs/tags/v[0-9] = bruce RW refs/tags = @staff But that's not how the matching works. As long as any refex matches the refname being updated, it's a "yes". Since the second refex (which says "anything containing `refs/tags`") is a superset of the first one, it lets anyone on `@staff` create versioned tags, not just Bruce. One way to fix this is to allow "excludes" -- some changes in syntax, combined with a rigorous, ordered, interpretation would do it. Let's recap the **existing semantics**: > the first matching refex that has the permission you're looking for (`W` > or `+`), results in success. A fallthrough results in failure Here are the **new semantics**, with changes from the "main" one in bold: > the first matching refex that has the permission you're looking for (`W` > or `+`) **or a minus (`-`)**, results in success **or failure, > respectively**. A fallthrough **also** results in failure So the example we started with becomes, if you use "deny" rules: RW refs/tags/v[0-9] = bruce - refs/tags/v[0-9] = @staff RW refs/tags = @staff And here's how it works: * for non-version tags, only the 3rd rule matches, so anyone on staff can push them * for version tags by bruce, the first rule matches so he can push them * for version tags by staffers *other than bruce*, the second rule matches before the third one, and it has a `-` as the permission, so the push fails #### separating delete and rewind rights Since the beginning, `RW+` meant being able to rewind *or* delete a ref. My stand is that these two are fairly similar, and infact a rewind is almost the same as a delete+push (the only difference I can see is if you had core.logAllRefUpdates set, which is *not* a default setting). However, there seem to be cases where it is useful to distinguish them -- situations where one of them should be restricted more than the other. ([Arguments][sdrr] exist for both sides: restrict delete more than rewind, and vice versa). So we now allow these two rights to be separated. Here's how: * branch deletion is permitted by using `RWD` or `RW+D` -- essentially the current branch permissions with a `D` suffixed * if a repo has a rule containing such a `D`, all `RW+` permissions (for that repo) cease to permit deletion of the ref matched. This provides the *greatest* backward compatibility, while also enabling the new semantics at the granularity of a repo, instead of the entire config. Note 1: if you find that `RW+` no longer allows deletion but you can't see a `D` permission in the rules, remember that gitolite allows a repo config to be specified in multiple places for convenience, included delegated or included files. Be sure to search everywhere :) Note 2: a quick way to make this the default for *all* your repos is: repo @all RWD dummy-branch = foo where foo can be either the administrator, or if you can ignore the warning message when you push, a non-existant user. [sdrr]: http://groups.google.com/group/gitolite/browse_thread/thread/9f2b4358ce406d4c# #### file/dir NAME based restrictions In addition to branch-name based restrictions, gitolite also allows you to restrict what files or directories can be involved in changes being pushed. This basically uses `git diff --name-only` to obtain the list of files being changed, treating each filename as a "ref" to be matched. Please see `conf/example.conf` for syntax and examples. #### delegating parts of the config file You can now split up the config file and delegate the authority to specify access control for their own pieces. See [doc/5-delegation.mkd](http://github.com/sitaramc/gitolite/blob/pu/doc/5-delegation.mkd) for details. ### convenience features #### what repos do I have access to? Sometimes there are too many repos, maybe even named similarly, or with the potential for typos, confusion about hyphens/underscores or upper/lower case, etc. You'd just like a simple way to know what repos you have access to. Easy! Just use ssh to give the "info" command to the gitolite server: $ ssh git@server info hello sitaram, the gitolite version here is v1.4.2-4-g40cbecd the gitolite config gives you the following access: #R W SecureBrowse #R W anu-wsd #R W entrans @R W git-notes @R W gitolite #R W gitolite-admin #R W indic_web_input @C #R private/CREATOR/[\w.-]+ #R W proxy @C @R W public/CREATOR/[\w.-]+ @R @W testing #R W vkc To understand what these symbols mean, please see doc/report-output.mkd. The administrator can also say things like: ssh gitolite info u1 u2 u3 to get this info for other user(s). #### error checking the config file gitosis does not do any. I just found out that if you mis-spell `members` as `member`, gitosis will silently ignore it, and leave you wondering why access was denied. Gitolite "compiles" the config file first and keyword typos *are* caught so you know right away. #### including config lines from other files See the entry under "INCLUDE SOME OTHER FILE" in `conf/example.conf`. #### support for git installed outside default PATH The normal solution is to add to the system default PATH somehow, either by munging `/etc/profile` or by enabling `PermitUserEnvironment` in `/etc/ssh/sshd_config` and then setting the PATH in `~/.ssh/.environment`. All these are security risks because they allow a lot more than just you and your git install :-) And if you don't have root, you can't do this anyway. The only solution till now has been to ask every client to set the config parameters `remote..receivepack` and `remote..uploadpack`. But telling *every* client to do so is a pain... Gitolite lets you specify the directory in which git binaries are to be found, via a new variable (`$GIT_PATH`) in the "rc" file. If this variable is non-empty, it will be appended to the PATH environment variable before attempting to run git stuff. Very easy, very simple, and completely transparent to the users :-) **Note**: sometimes you have a system that already has an older "git" installed in one of the system PATHs, but you've installed a newer git in some non-standard location and want that picked up. Because of security reasons, gitolite will not prepend `GIT_PATH` to the PATH variable, so the older git comes first and it gets kinda frustrating! Here's a simple workaround. Ignore the `GIT_PATH` variable, and directly set the full PATH in the rc file, like so: $ENV{PATH} = "/home/sitaram/bin:$ENV{PATH}"; #### "personal" branches "personal" branches are great for corporate environments, where unauthenticated pull/clone is a no-no. Since a dev workstation cannot do authentication, even work shared just between 2 devs has to go *via* the server. This causes the same branch name clutter as in a centralised VCS, plus setting up permissions for this becomes a chore for the admin. gitolite lets you define a "personal" or "scratch" namespace prefix for each developer (e.g., `refs/personal//*`). Just add a line like: RW+ personal/USER/ = @userlist This means I (user "sitaram") can do anything to any branch whose name starts with `personal/sitaram/` assuming I'm in "userlist". You can have any number of such lines with different prefixes (for example, using topic names instead of "personal") or even suffixes if you like. The important thing is that the "branch" name should contain `/USER/` (including the slashes). At runtime this will match whoever is the current user. Access is still determined by the right hand side of course. #### custom hooks and custom git config You can specify hooks that you want to propagate to all repos, as well as per-repo "gitconfig" settings. Please see `doc/2-admin.mkd` and `conf/example.conf` for details. ### helping with gitweb Although gitweb is a completely separate program, gitolite can do quite a lot to help you manage gitweb access as well; once the initial setup is complete, you can do it all from within the gitolite config file! #### easier to specify gitweb "description" and gitweb/daemon access To enable access to a repo via gitweb *and* create a "description" for it to show up on the webpage, just add a line like this, anywhere in the config file: reponame = "one line of description" You can also specify an "owner": reponame "owner name" = "one line of description" To enable access to one or more repos via git daemon, just give "read" permissions to the special username `daemon`. There is also a special user called `gitweb` to specify gitweb access; useful if you don't care about specifying individual descriptions for each repo and just want to quickly enable gitweb access to one or more repos. Remember gitolite lets you specify the access control specs in bits and pieces, so you can keep all the daemon/gitweb access in one place, even if each repo has more specific branch-level access config specified elsewhere. Here's an example, using really short reponames because I'm lazy: # maybe near the top of the file, for ease of access: @only_web = r1 r2 r3 @only_daemon = r4 r5 r6 @web_and_daemon = r7 r8 r9 repo @only_web R = gitweb repo @only_daemon R = daemon repo @web_and_daemon R = gitweb R = daemon # ...maybe much later in the file: repo r1 # normal developer access lists for r1 and its branches/tags in the # usual way repo r2 # ...and so on... #### easier to link gitweb authorisation with gitolite Over and above whether a repo is even *shown* by gitweb, you may want to further restrict people, allowing them to view *only* those repos for which they have been given read access by gitolite. This requires that: * you have to have some sort of HTTP auth on your web server (out of my scope, sorry!) * the HTTP auth should use the same username (like "sitaram") as used in the gitolite config (for the corresponding user) Normally a superuser sets up passwords for users using the "htpasswd" command, but this is an administrative chore. Robin Smidsrød had the *great* idea that, since each user already has pubkey access to `git@server`, this gives us a very neat way of using gitolite to let the users *manage their own HTTP passwords*. Here's how: * setup apache so that the htaccess file it looks for is owned by the "git" user * in the `~/.gitolite.rc` file, look for the variable `$HTPASSWD_FILE` and point it to this file * tell your users to type in `ssh git@server htpasswd` to set or change their HTTP passwords Here's the rest of how it hangs together. Gitweb allows you to specify a subroutine to decide on access. We use that feature and tie it to gitolite. Sample code (untested by me, but others do use it, munged from something I saw [here][leho]) is given below. Note the **utter simplicity** of the actual check (just 1 line!). This is an unexpected piece of luck coming from the decision to keep the config parse separate from the actual access control. The config parser puts a pure perl hash in that file named below as `$gl_conf_compiled`, so all the parsing is already done and we just use it! # completely untested... but the basic idea should work fine # change these as needed # projectroot should be the same as gitolite's REPO_BASE, but converted to # an absolute path $projectroot = '/home/git/repositories/'; my $gl_conf_compiled = '/home/git/.gitolite/conf/gitolite.conf-compiled.pm'; # I am told this gives us the HTTP auth username my $username = $cgi->remote_user; # ---------- # parse the config file; updates %repos hash our %repos; die "parse $gl_conf_compiled failed: " . ($! or $@) unless do $gl_conf_compiled; # this is gitweb's mechanism; it calls whatever sub is pointed at by this # variable to decide access yes/no. Gitweb calls it with one argument # containing the full path of the repo being accessed $export_auth_hook = sub { my $reponame = shift; # take the full path provided, strip the beginning... $reponame =~ s/\Q$projectroot\E\/?//; # ...and the end, to get the repo name as it is specified in gitolite conf $reponame =~ s/\.git$//; return exists $repos{$reponame}{R}{$username} || exists $repos{$reponame}{R}{'@all'}; }; [leho]: http://leho.kraav.com/news/2009/10/27/using-apache-authentication-with-gitweb-gitosis-repository-access-control/ ### advanced features #### repos named with wildcards Please see `doc/4-wildcard-repositories.mkd` for all the details. #### admin defined commands This requires the wildcards feature to be enabled, but is then an extremely powerful feature. See `doc/admin-defined-commands.mkd`. #### access control for external commands Gitolite now has a mechanism for allowing access control for arbitrary external commands, as long as they are invoked via ssh and present a server-side command that contains enough information to make an access control decision. Note that this is incompatible with giving people shell access as described in `doc/6-ssh-troubleshooting.mkd` -- people who have shell access are not subject to this mechanism (it wouldn't make sense to try and control someone who has shell access anyway). In general, external commands require changes in one or both the config files; the sample files in `conf/` double as documentation, so you should look there for examples and usage. Commands implemented so far are: * rsync * svnserve (see next section for a brief description; this has been contributed by Simon and Vladimir) ##### svnserve If you are transitioning from SVN to gitolite, and have a lot of users using public-key authentication with SVN, this feature may be useful to you. Once you migrate all users' public keys into gitolite, you can set the `$SVNSERVE` variable in `~/.gitolite.rc` to tie `svnserve` with gitolite's authentication system. Assuming you installed gitolite to the same user as the one you used for SVN, SVN connectivity will be retained, and users will be able to use both SVN and git using the same SSH configuration. ## design choices ### keeping the parser and the access control separate There are two programs concerned with access control: * `gl-auth-command`, the program that is run via `~/.ssh/authorized_keys`; this decides whether git should even be allowed to run (basic R/W/no access). (This one cannot decide on the branch-level access; it is not known at this point what branch is being accessed) * the update-hook on each repo, which decides the per-branch permissions I have chosen to keep the relatively complex task of parsing the config file out of them to keep them simpler (and faster). So any changes to the config have to be first "compiled", and the access control programs use this "compiled" version of the config. (The compile step also refreshes `~/.ssh/authorized_keys`). If you choose the "easy install" method, all this is quite transparent to you anyway. If you cannot use the easy install and must install manually, I have clear instructions on how to set it up.