The old method of passing in usergroup info had some problems, which are
now fixed. It is also much easier to use now -- no more "wrapper"
script, plus it should work identially whether you use sshd or httpd.
See doc/big-config.mkd for details on the new method.
----
Notes on problems with the old method:
The old method for passing in usergroup info consisted of tacking them
on as extra arguments to gl-auth-command, after the username.
However, there are some problems with this method.
Some actions in gitolite look for permissions for users other than the
invoking user. Determining permissions for gitweb and daemon is one.
An admin asking for "info" on some other user, is another.
However, the list of groups sent in via the command line
pertains only to the invoking user, so these actions don't work
correctly. They may even pick up the wrong permissions.
What it all boils down to is that we need group information for any user
dynamically, instead of being passed a (static) list just for the
invoking user.
- hardcode 0700 mode for GL_ADMINDIR tree (thanks to ma at
ibitsense.com) for catching this
- honor REPO_UMASK for GL_REPO_BASE_ABS creation
- plus a minor doc update
- 79f0a5f ("(big one!) more than one wildcard may match a repo...")
makes some of the dire warnings about this irrelevant
- d1d2c3e and ad64f99 ("git config settings in wild repos: part 1" and
"...part 2") makes this caveat also useless
While we were about it, we added a quick intro and tried to make some
other details a little clearer.
As usual there's more documentation than code.
Unlike usual, however, this isn't completely tested. Please read the
documentation for details of what works, what doesn't, what has been
tested, what hasn't, and so on.
- all anchors prefixed by AUTO_ now
- some bad links fixed (maybe still a few I didn't catch)
- misc wording changes/additions (support section to README,
"technical skills" section to install doc, etc).
because someone else found the doc overwhelming. However, the suggested
reading order (which so far existed only on the wiki) was probably a
good thing to have at the top of the README, and the disclaimers about
ssh may help keep my sanity a little longer ;-)
jefferai pointed out that some of the links about this were broken, and
a quick look showed that it was described in multiple places too.
Brought it all together...
conf/example.gitolite.rc
- "slave mode" flag to disable pushes and "list of slaves"
hooks/common/post-receive.mirrorpush
- code to push to the mirror, creating the repo if needed
src/mirror-shell
- shell for master pushing to a slave, because we don't actually want
to go through gitolite itself, yet we have to take care of
$REPO_BASE being wherever. And of course we have to set
GL_BYPASS_UPDATE_HOOK to 1 for the push to happen!
src/gl-mirror-sync
- manually runnable program to sync from current server to another
gl-emergency-addkey replaced by totally new gl-dont-panic, which does
more (including recovering from a botched push, not just lost keys), is
cleaner, and works for all install methods
Fedora, till now, had no hope in hell of running the info command. Why?
Because the output of the info command is semantically the same as the
output of the compile script *before* the big-config mode was created.
And we all know how _that_ went ;-)
So now you get to give "info" a partial reponame or a pattern, just like
in the case of "expand". And if you're under GL_BIG_CONFIG this pattern
is mandatory. And if you try to cheat it'll still stop after showing 5
entries to prevent (accidental?) DOSs
Anyway, see doc changes in this commit for more details.
More and more people are using one of the first 3 methods of install
(the ones that don't involve running "src/gl-easy-install" from the
client side) usualy due to RPM/DEB being available now.
Previously, the ending message on running that command was serving this
purpose, and so it never really got written down in so many words.
[thanks to antgel for catching this]
----
while we were there, we removed a now-obsolete section that talks about
how to use just one key; there are better methods now
This is what I *should* have done back then; thanks to Jeff Mitchell for
pointing out a problem with the old method.
The old one is *definitely* a kludge. <shamefaced grin>
The log message format has changed. All log messages now have a common
prefix (timestamp, user, IP). This is followed by $SSH_ORIGINAL_COMMAND
(or, in one special case, the name of the user's login shell). Any
further text appears after this (currently this only happens in the case
of a successful push -- one for each ref pushed successfully)
see doc/3 for details (look for "separating delete and rewind rights"
----
and for gerrit, this is one more thing it can do that we can too ;-)
[the original text was somewhat misleading. We mean "prevent someone
from creating a branch that they have permissions to push". That is
what is now possible, where it was not possible before.]
people will NOT read documentation, especially the bloody install
documentation. I'm about ready to throw in the towel and declare
gitolite unsupported, take-it-or-leave-it.
But I'm making one last attempt to refocus the install doc to better
suit the "I know I'm very smart and I dont have to read docs so it's
clearly your fault that I am not able to install gitolite" crowd.
As a bonus, though, I ended up making proper, hyper-linked, TOCs for
most of the docs, and moved a whole bunch of stuff around. Also finally
got some of the ssh stuff over from my git-notes repo because it really
belongs here.
the commits leading up to v1.5 caused the data format to change (we
added a rule sequence number).
This in turn caused a problem for people who may have installed using
the "system install / user setup" mode of install (which includes people
who used RPM/DEB to install it) -- they would now have to *manually* run
"gl-setup" once after the rpm/deb upgrade.
This commit *tries* to mitigate this problem by recording a data format
version number in the compiled output file. On any access to that file,
if the version number is not found or is found to be not equal to the
current version, gl-setup is run again.
The reason I say "*tries*" is that the exact command used to do this is
a bit of a hack for now. However, if it works for Fedora and Debian,
I'm going to leave it at that :)
There has been a format change to the compiled output file. As the
CHANGELOG says:
Upgrading to v1.5 from any version prior to v1.5 requires an extra
step for people who installed gitolite using the "system install /
user setup" method described in doc/0-INSTALL.mkd. For such
installations, after the administrator has upgraded gitolite
system-wide, each "gitolite host" user must run `gl-setup` once
(without any arguments).
This is *not* an issue if you installed using src/gl-easy-install.
Move the example code from doc/3 to contrib/gitweb/ and modify it
to work with both wildcard and non-wildcard setups.
Signed-off-by: Teemu Matilainen <teemu.matilainen@reaktor.fi>
(as if we didn't already have enough programs with the word "install" in
their names!)
Anyway, this does what an RPM or a DEB would do -- basically implement
the instructions in Appendix C of doc/0.
You can use this to do a system-wide install if your distro isn't as
smart, forward-looking, and uptodate as Fedora ;-)
Clone the repo somewhere, cd to it, and run, for example:
sudo src/gl-system-install /usr/local/bin /var/gitolite/conf /var/gitolite/hooks
or something like that. See doc/0 for details. Run without arguments
for help.
Ouch! How mortifying :) I'd always thought this was one of the Brit/US
differences, but to find out that it really *isn't* a word... hmph!
Anyway, in the interest of not breaking existing wild repos, the
ownership file is still called "gl-creater". Everything else has been
changed.
(...thanks to Sverre)
Having to specify "D" separately from RW or RW+ was cumbersome, and
although I don't actually use this feature, I can see the point.
One way to think of this is:
- RW and RW+ were the only existing branch level rights
- it doesnt make sense to have D rights without W (hence RW) rights
- so we simply suffix a D to these if required.
Thus you can have RW, RW+, RWD, RW+D.
I hope the (hopefully few) of you who have started to use this feature
will convert your configs when you next upgrade to "pu".
I now regret pushing the previous syntax to master too quickly -- lots
of people use master only, and on the next promotion of pu the syntax
will change. To reduce this exposure, this change will be promoted to
master very soon.
Previous implementations of "give shell access to some gitolite users"
feature were crap. There was no easy/elegant way to ensure that someone
who had repo admin access would not manage to get himself shell access.
Giving someone shell access requires that you should have shell access
in the first place, so the simplest way is to enable it from the server
side only.
So now that we decided to do that, we may as well prepare for other,
future, commands by starting a server-side utility program with
sub-commands (the only current one being "shell-add")
normally, RW+ means permission to rewind or delete.
Now, if you use "D" permission anywhere in a repo config, that means
"delete" and RW+ then means only "rewind", no delete.
- no need to put it at the end of the config file now, yeaaay!
- @all for @all is meaningless and not supported. People asking will
be told to get a life or use git-daemon.
- NAME/ limits for @all repos is ignored for efficiency reasons.
There are some disadvantages to the old-style personal branch scheme.
It only allows one specific pattern (of refname) to be used, forces that
pattern to be applicable to *all* repos in the entire config, and
requires editing the rc file (on the server) to be edited to achieve
this.
In other words, it's a very blunt instrument...
The new style depends on using lines like this within a specific repo
config:
RW+ personal/USER/ = @userlist
The important thing is that the "branch" name should contain `/USER/`
(including the slashes). Access is still determined by the right hand
side of course.
This gives you the following advantages:
- allow it only for repos that need it
- allow different patterns to be used for different repos
- allow *multiple* patterns; just add more than one such line
- allow the pattern to have suffixes (eg: foo/USER/bar)
the changes to cp/scp are because without "-p" they dont carry perms
across to existing files. So if you forgot to chmod +x your custom
hook and ran easy install, then after that you have to go to the server
side to fix the perms...
when repos are copied over from elsewhere, one had to run easy install
once again to make the new (OS-copied) repo contain the proper update
hook.
We eliminate this step now, using a new, empty, "hook" as a sentinel and
having "compile" check/fix all repos' hooks.
Since you have to add the repos to conf anyway, this makes it as
seamless as possible. The correct sequence now is
- (server) copy the repo at the OS level
- (admin clone) add it to conf/gitolite.conf, commit, push
(about this commit)
The install doc now describes both the ways of installing gitolite.
It also has a handy appendix for package maintainers describing what
they need to do.
(about the "dps" -- distro packaging support -- commit series)
This commit is the last in the chain meant to make gitolite more
friendly for package maintainers.
Frankly, I never really thought gitolite would get big enough or
important enough for someone to package it, and I always did just
the bare minimum I needed to get it working, first for myself, then
anyone who hopped onto #git and asked. As a result, it had some
quirks in terms of what is expected where and so on...
Luckily, it didn't take a lot of changes to fix it, and this series
of commits should help make it very easy to package gitolite for
system-wide use.
The wildrepos branch has been merged into master, and deleted. It will no
longer exist as a separate branch. Instead, a new variable
called $GL_WILDREPOS has been added which acts as a switch; when
off (which is the default), many wildrepos features are disabled.
(the "C" permissions, and the getperms (etc.) commands mainly).
Important: if you are using wildrepos, please set "$GL_WILDREPOS = 1;" in
the RC file when you upgrade to this version (or just before you do the
upgrade).
lots of conflicts, esp in gl-auth-command, due to refactoring the
"special commands" stuff on master
Conflicts:
doc/3-faq-tips-etc.mkd
src/gitolite.pm
src/gl-auth-command
src/gl-compile-conf
