Merge branch 'easy-install'

README.mkd

@@ -3,19 +3,22 @@
 >   [IMPORTANT: There is now an "upgrade" document in the "doc" directory;
 >   please read if upgrading gitolite]
 
+>   [Update 2009-10-10: apart from all the nifty new features, there's now an
+>   "easy install" script in the src directory.  Please see the INSTALL
+>   document in the doc directory for details]
+
 ----
 
-Gitolite is the bare essentials of gitosis, with a completely different
+Gitolite is a rewrite of gitosis, with a completely different config file that
-config file that allows (at last!) access control down to the branch level,
+allows (at last!) access control down to the branch level, including
-including specifying who can and cannot *rewind* a given branch.  It is
+specifying who can and cannot *rewind* a given branch.
-released under GPL v2.  See COPYING for details.
 
 In this document:
 
   * why
-  * what's gone
+  * what's extra
-  * what's new
+  * security
-  * the workflow
+  * contact and license
 
 ----
 
@@ -28,30 +31,15 @@ a typical $DAYJOB setting, there are some issues:
     and be done
   * often, "python-setuptools" isn't installed (and on a Solaris9 I was trying
     to help remotely, we never did manage to install it eventually)
-  * or you don't have root access, or the ability to add users
+  * you don't have root access, or the ability to add users (this is also true
+    for people who have just one userid on a hosting provider)
   * the most requested feature (see "what's new?") had to be written anyway
 
-### what's gone
-
-While I was pondering the need to finally learn python[1] , I also realised
-that:
-
-  * no one in $DAYJOB type environments will use or approve access methods
-    that work without any authentication, so I didn't need gitweb/daemon
-    support in the tool or in the config file.
-
-    Update 2009-09-24: I don't use this feature but someone wanted it, so I
-    added it... see the "faq, tips, etc" document for more
-
-  * the idea that you admin it by pushing to a special repo is nice, but not
-    really necessary because of how rarely these changes are made, especially
-    considering how much code is involved in that piece
-
 All of this pointed to a rewrite.  In perl, naturally :-)
 
-### what's new
+### what's extra
 
-Per-branch permissions.  You will not believe how often I am asked this at
+**Per-branch permissions**.  You will not believe how often I am asked this at
 $DAYJOB.  This is almost the single reason I started *thinking* about rolling
 my own gitosis in the first place.
 
@@ -61,50 +49,42 @@ deleting a branch (which is really just an extreme form of rewind).  I needed
 something in between allowing anyone to do it (the default) and disabling it
 completely (`receive.denyNonFastForwards` or `receive.denyDeletes`).
 
-Take a look at the example config file in the repo to see how I do this.  I
+Here're **some more features**.  All of them are documented in detail
-copied the basic idea from `update-hook-example.txt` (it's one of the "howto"s
+somewhere in the `doc/` subdirectory.
-that come with the git source tree).  However, please note the difference in
-the size and complexity of the *operational code* between the update hook in
-that example, and in mine :-)  The reason is in the next section.
 
-### the workflow
+  * simpler, yet far more powerful, config file syntax, including specifying
+    gitweb/daemon access.  You'll need this power if you manage lots of users
+    + repos + combinations of access
+  * config file syntax gets checked upfront, and much more thoroughly
+  * if your requirements are still too complex, you can split up the config
+    file and delegate authority over parts of it
+  * more comprehensive logging [aka: management does not think "blame" is just
+    a synonym for "annotate" :-)]
+  * "personal namespace" prefix for each dev
+  * migration guide and simple converter for gitosis conf file
+  * "exclude" (or "deny" rights in the config file) -- this is the "rebel"
+    branch in the repository, and always will be ;-)
 
-In order to get per-branch access, you *must* use an update hook.  However,
+### security
-that only gets invoked on a push; "read" access still has to be controlled
-right at the beginning, before git even enters the scene (just the way gitosis
-currently works).
 
-So: either split the access control into two config files, or have two
+Due to the environment in which this was created and the need it fills, I
-completely different programs *both* parse the same one and pick what they
+consider this a "security" program, albeit a very modest one.  The code is
-want.  Crap... I definitely don't want the hook doing any parsing, (and it
+very small and easily reviewable -- the 2 programs that actually control
-would be nice if the auth-control program didn't have to either).
+access when a user logs in total about 200 lines of code (about
+80 lines according to "sloccount").
 
-So I changed the workflow completely:
+For the first person to find a security hole in it, defined as allowing a
+normal user (not the gitolite admin) to read a repo, or write/rewind a ref,
+that the config file says he shouldn't, and caused by a bug in *code* that is
+in the "master" branch, (not in the other branches, or the configuration file
+or in Unix, perl, shell, etc.)...  well I can't afford 1000 USD rewards like
+djb, so you'll have to settle for 1000 INR (Indian Rupees) as a "token" prize
+:-)
 
-  * all admin changes happen *on the server*, in a special directory that
+----
-    contains the config and the users' pubkeys.  But there's no commit and
-    push afterward
-  * instead, after making changes, you "compile" the configuration.  This
-    refreshes `~/.ssh/authorized_keys`, as well as puts a parsed form of the
-    access list in a file for the other two pieces to use.
 
-The pre-parsed form is basically a huge perl variable.  It's human readable
+### contact and license
-too (never mind what the python guys say!)
 
-So the admin knows immediately if the config file had any problems, which is
+Gitolite is released under GPL v2.  See COPYING for details.
-good.  Also, the relatively complex parse code is not part of the actual
-access control points, which are:
-
-  * the program that is run via `~/.ssh/authorized_keys` (I call it
-    `gl-auth-command`, equivalent to `gitosis-serve`); this decides whether
-    git should even be allowed to run (basic R/W/no access)
-  * the update-hook on each repo, which decides the per-branch permissions
-
-### footnotes
-
-[1] I hate whitespace to mean anything significant except for text; this is a
-personal opinion *only*, so pythonistas please back off :-)
-
-### contact
 
 sitaramc@gmail.com

conf/example.gitolite.rc

@@ -5,7 +5,7 @@
 # this file is meant to be pulled into a perl program using "do" or "require".
 
 # You do NOT need to know perl to edit the paths; it should be fairly
-# self-explanatory
+# self-explanatory and easy to maintain perl syntax :-)
 
 # --------------------------------------
 
@@ -88,6 +88,16 @@ $PERSONAL="";
 # NOTE: whatever value you choose, for security reasons it is better to make
 # it fully qualified -- that is, starting with "refs/"
 
+# --------------------------------------
+
+# if git on your server is on a standard path (that is
+#       ssh git@server git --version
+# works), leave this setting as is.  Otherwise, choose one of the
+# alternatives, or write your own
+
+$GIT_PATH="";
+# $GIT_PATH="/opt/bin/";
+
 # --------------------------------------
 # per perl rules, this should be the last line in such a file:
 1;

doc/0-INSTALL.mkd

@@ -1,98 +1,75 @@
 # installing gitolite
 
-### pre-requisites
+This document tells you how to install gitolite.  After the install is done,
+you may want to see the "admin" document for adding users, repos, etc.
 
-If you managed to install git, you might already have what gitolite needs:
+There's an easy install script for Linux, and for other Unixes there's a
+slightly more manual process.  Both are explained here.
 
-  * git itself, the more recent the better
+In this document:
-  * perl, typically installed with git, since git sort of needs it; any
-    version that includes `Data::Dumper`[1] will do.
-  * one user account on the server, with password access [2]
 
-A major objective is to allow use by people without root access, permissions
+  * easy install
-to create other userids, etc.  Even if you have root, please add a user just
+  * manual install
-for gitolite and do all this from that user.
+  * other notes
-
+  * next steps
-### getting a tar file from a clone
-
-You can clone the repo from github, then execute a make command to extract a
-tar file of the branch you want.  Please use the make command, not a plain
-"git archive".  The comments in the `Makefile` will explain why.
-
-    git clone git://github.com/sitaramc/gitolite.git
-    cd gitolite
-    make master.tar
-    # or maybe "make rebel.tar" or "make pu.tar"
-
-### quick install from tar file
-
-  * make a temp directory somewhere, cd to it, and unpack the tar file
-  * run `src/install.pl` and follow the prompts
-
-**When you are told to edit some file, please read the comments in the file**.
-And if you can make some time to read the documentation, please do.
-Especially if you have problems.
-
-Notes:
-
-  * At present the location of `~/.gitolite.rc` is fixed (maybe later I'll
-    change it to a "git config" variable but I don't see much need right now)
-
-    If you edit it and change any paths, be sure to keep the perl syntax --
-    you *don't* have to know perl to do so, it's fairly easy to guess in this
-    limited case.  And of course, make sure you adjust the commands shown
-    above to suit the new locations
-
-  * the config file is (by default) at `~/.gitolite/conf/gitolite.conf`,
-    though you can change its location in the "rc" file.  Edit the file as you
-    wish.  The comments in the file ought to be clear enough but let me know
-    if not
-
-  * if you want to bring in existing (bare, server) repos into gitolite, this
-    should work (refer to `~/.gitolite.rc` for *your* values of the pathnames
-    below):
-      * backup the repo, then move it to `$BASE_REPO`
-      * copy `$GL_ADMINDIR/src/update-hook.pl` to
-        `[reponame].git/hooks/update` -- if you don't do this, per branch
-        restrictions will not work
-      * then update the keys and the config file and "compile" (see "admin"
-        document)
-
-### Footnotes:
-
-[1] Actually, due to the way gitolite is architected, you can manage
-without `Data::Dumper` on the server if you have no choice.  Only
-`gl-compile-conf` needs it, so just run that on some other machine and copy
-the two output files across.  Cumbersome but doable... the advantage of
-separating all the hard work into a manually-run piece :)
-
-[2] If you have *only* pubkey access, and **no** password access, then your
-pubkey is already in the server's `~/.ssh/authorized_keys`.  If you also need
-to access git as a developer (clone, push, etc), do *not* submit this same
-pubkey to gitolite -- it won't work.
-
-Instead, create a different keypair for your "developer" role (by, e.g.,
-`ssh-keygen -t rsa -f ~/.ssh/gitdev`), then give `~/.ssh/gitdev.pub` to
-gitolite as "yourname.pub", just like you would do for any other user.
-
-Then you create a suitable `~/.ssh/config` to use the correct key
-automatically, something like this:
-
-    host gitadm
-         hostname my.server
-         user my_userid_on_server
-
-    host gitdev
-         hostname my.server
-         user my_userid_on_server
-         identityfile ~/.ssh/gitdev
-
-From now on, `ssh gitadm` will get you a command line on the server, to do
-gitolite admin and other work.  And your repository URLs would look like
-`gitdev:reponame.git`.  Very, very, simple...
-
-And as with gitosis, there's more "ssh" magic than "git" magic here :-)
 
 ----
 
-gitolite is released under the GPL v2 license.  See COPYING for details
+### easy install
+
+There is an easy install script that makes installing very easy for the common
+case.  **This script is meant to be run on your workstation, not on the
+server!**  It will take care of all the server side work, *and* get you
+"push-to-admin" too :-)  In short, it does **everything**!
+
+Assumptions:
+
+  * you have a server to host gitolite
+  * git is installed on that server (and so is perl)
+  * you have a userid on that server
+  * you have ssh-pubkey (password-less) login to that userid
+      * (if you have only password access, run `ssh-keygen -t rsa` to create a
+        new keypair if needed, then run `ssh-copy-id user@host`)
+  * you have a clone or an archive of gitolite somewhere on your workstation
+
+If so, just `cd` to that clone and run `src/00-easy-install.sh` and follow the
+prompts!  (Running it without any arguments shows you usage plus other useful
+info).
+
+#### advantages over the older install methods
+
+  * all ssh problems reduced to **just one pre-requisite**: enable ssh pubkey
+    (password-less) access to the server from your workstation first
+  * the script takes care of all the server side work
+  * when done:
+      * you get two different pubkeys (the original one for command line
+        access as before, plus a new one, created by the script, for gitolite
+        access)
+      * you can admin gitolite by commit+push a "gitolite-admin" repo, just
+        like gitosis (i.e., full "push to admin" power!)
+
+#### disadvantages
+
+  * has been tested only with Linux
+
+### manual install
+
+If for some reason you cannot use the easy-install method, (for example,
+you're on a non-Linux machine), it's not very complicated.  Just open the file
+`src/00-easy-install.sh` in a nice, syntax coloring, text editor, and follow
+the instructions marked "MANUAL" :-)
+
+### other notes
+
+  * If you edit `~/.gitolite.rc` and change any paths, be sure to keep the
+    perl syntax -- you *don't* have to know perl to do so, it's fairly easy to
+    guess in this limited case
+
+  * the config file is (by default) at `~/.gitolite/conf/gitolite.conf`,
+    though you can change its location in the "rc" file.  Edit the file as you
+    wish.  The comments in the example file (`conf/example.conf`) ought to be
+    clear enough but let me know if not
+
+### next steps
+
+See the "admin" document for how to add users, etc.

doc/0-UPGRADE.mkd

@@ -1,11 +1,19 @@
 # upgrading gitolite atomically
 
+Upgrading is done **manually, on the server** (except the last step, which is
+on your admin repo clone), even if you installed it using the easy install
+script on the client.  First, it's not as difficult as an install so you don't
+really need a script.  Second, you may have customised the "rc" file
+(`~/.gitolite.rc` on the server) and I'm reluctant to mess with that in an
+automated way.
+
 ### general upgrade notes
 
 If you follow the steps below, you can make the upgrade "atomic", so you don't
 have to do it at a "quiet" time or something.
 
-1.  untar the new version to some temp directory and `cd` to it
+1.  copy a tar file containing the new version to the server, untar it to some
+    temp directory and `cd` to it
 
 2.  *prepare* the new version of `~/.gitolite.rc`.  It **must** have **all**
     the variables defined in `conf/example.gitolite.rc` (the "new" rc file),
@@ -31,12 +39,11 @@ have to do it at a "quiet" time or something.
         src/install.pl
 
 5.  compile the config once again, in case the *internal* format of the
-    compiled config file (`$GL_CONF_COMPILED`) has changed
+    compiled config file (`$GL_CONF_COMPILED`) has changed.
 
-        src/gl-compile-conf
+    To do this, you have to do a "git push" on the client side.  That might
-
+    require a dummy change (maybe add a blank line somewhere) because
-    (if you've already setup "push-to-admin", this step should be replaced by
+    otherwise the push will not happen.
-    a "git push".  Make a dummy commit if needed, to make the push happen).
 
 And you're done.
 
@@ -45,6 +52,27 @@ And you're done.
 If any extra steps beyond the generic ones above are needed, they will be
 listed here, newest first.
 
+#### upgrading from 410c9ba
+
+Between 410c9ba and this version, gitolite managed to make "push to admin" the
+default for new installs, but in a much more painless way.  If you're
+upgrading, you're not forced to use "push to admin", but I'd suggest you:
+
+  * make sure you have password-less (pubkey) login to a command line on your
+    server
+  * save your `~/.gitolite.rc`, `keydir/*.pub` and your `conf/gitolite.conf`
+    files from the server, bring them to your workstation
+  * then run `src/00-easy-install.sh` on the workstation, as if it were a
+    fresh install
+      * when the editor pops up to edit the rc file, delete all the lines in
+        it and copy them from the saved `~/.gitolite.rc`
+      * at the end of the script, after the gitolite-admin repo has been
+        cloned successfully, copy the saved `conf/gitolite.conf` and
+        `keydir/*.pub` to the clone, then add, commit, and push
+
+Gitolite also learnt to delegate parts of the config to other users.  See
+`doc/5-delegation.mkd` for details.
+
 #### upgrading from 8217ef9
 
 Between 8217ef9 and this version, gitolite learnt to handle gitweb/daemon

doc/1-migrate.mkd

@@ -3,14 +3,9 @@
 [TODO: make the migration tool fix up gitweb and daemon control also...]
 
 Migrating from gitosis to gitolite is pretty easy, because the basic design is
-the same.  The differences are:
+the same.
 
-  * gitolite does not use a special repo for the configuration, pubkeys, etc.
+Here's how we migrated my work repos:
-    You can choose to version that directory but it is not required that you
-    do so
-
-Here's how we migrated my work repos (note: substitute real paths, from your
-`~/.gitolite.rc`, for `$REPO_BASE` and `$GL_ADMINDIR` below):
 
 1.  login as the `git` user on the server, and get a bash shell prompt
 
@@ -18,10 +13,17 @@ Here's how we migrated my work repos (note: substitute real paths, from your
     else.  This will prevent users from pushing anything while you do the
     backup, migration, etc.
 
-3.  For added safety, **delete** the post-update hook that gitosis-admin
+3.  **edit** `~/.ssh/authorized_keys` and **carefully** remove all the lines
+    containing "gitosis-serve", as well as the marker line that says
+    "auto-generated by gitosis, DO NOT REMOVE", then save the file.  If the
+    file did not have any other keys and is now empty, don't worry -- save it
+    anyway because gitolite expects the file to be present (even if it is
+    empty).
+
+4.  For added safety, **delete** the post-update hook that gitosis-admin
     installed
 
-        rm $REPO_BASE/gitosis-admin.git/hooks/post-update
+        rm ~/repositories/gitosis-admin.git/hooks/post-update
 
     or at least rename it to `.sample` like all the other hooks hanging
     around, or edit it and comment out the line that calls `gitosis-run-hook
@@ -30,39 +32,34 @@ Here's how we migrated my work repos (note: substitute real paths, from your
     If you do not do this, an accidental push to the gitosis-admin repo will
     mess up your `~/.ssh/authorized_keys` file
 
-4.  take a **backup** of the `$REPO_BASE` directory
+5.  take a **backup** of the `~/repositories` directory
 
-5.  untar gitolite to some temporary directory and follow the instructions to
+Now, log off the server and get back to the client:
-    **install** it using `src/install.pl`
 
-6.  **convert** your gitosis config file:
+1.  follow instructions to install gitolite; see install document.  Make sure
+    that you **don't** change the default path for `$REPO_BASE`!
 
-        cd $GL_ADMINDIR
+2.  **convert** your gitosis config file.  Substitute the path for your
-        src/conf-convert.pl < ~/.gitosis.conf > conf/gitolite.conf
+    gitosis-admin clone in `$GSAC` below, and similarly the path for your
+    gito**lite**-admin clone in `$GLAC`
 
-    be sure to check the file to make sure it converted correctly
+        src/conf-convert.pl < $GSAC/gitosis.conf > $GLAC/gitolite.conf
 
-7.  **copy** the update hook to each of the existing repos (if you have repos
+    Be sure to check the file to make sure it converted correctly
-    in subdirectories, this won't work as is; adapt it):
 
-        for i in $REPO_BASE/*.git
+3.  **copy** the keys from gitosis's keydir (same meanings for GSAC and GLAC)
-        do
-            cp src/update-hook.pl $i/hooks/update
-        done
 
-8.  **copy** the keys from gitosis's keydir
+        cp $GSAC/keydir/* $GLAC/keydir
 
-        cp $REPO_BASE/gitosis-admin.git/gitosis-export/keydir/* keydir
+4.  **Important: expand any multi-key files you may have**.  See the "faq,
-
-9.  **Important: expand** any multi-key files you may have.  See the "faq,
     tips, etc" document in the doc directory for an explanation of what
     multi-keys are, how gitosis does them and how gitolite does it
     differently.
 
     You can split the keys manually, or use the following code (just
-    copy-paste it into your xterm):
+    copy-paste it into your xterm after "cd"-ing to your gitolite-admin repo
+    clone):
 
-        cd $GL_ADMINDIR
         wc -l keydir/*.pub | grep -v total | grep -v -w 1 | while read a b
         do
             i=1
@@ -82,12 +79,4 @@ Here's how we migrated my work repos (note: substitute real paths, from your
     "sitaram@laptop.pub" and "sitaram@desktop.pub" or whatever.  *Please check
     the files to make sure this worked properly*
 
-10. **edit** `~/.ssh/authorized_keys` and **carefully** remove all the lines
+5.  Check all your changes to your gitolite-admin clone, commit, and push
-    containing "gitosis-serve", as well as the marker line that says
-    "auto-generated by gitosis, DO NOT REMOVE", then save the file.  If the
-    file did not have any other keys and is now empty, don't worry -- save it
-    anyway because gitolite expects the file to be present (even if it is
-    empty).
-
-At this point you're ready to "compile" the configuration.  See the "admin"
-document for what to do, and how to check the outputs, etc.

doc/2-admin.mkd

@@ -22,15 +22,15 @@ Please read on to see how to do this correctly.
     extension, like `sitaram.pub` or `john-smith.pub`.  You can also use
     periods and underscores
 
-  * copy all these `*.pub` files to `$GL_KEYDIR`
+  * copy all these `*.pub` files to `keydir` in your gitolite-admin repo clone
 
-  * the config file (`$GL_CONF`) is very well commented, please take a couple
+  * edit the config file (`conf/gitolite.conf` in your admin repo clone).  See
-    of minutes to read it.  Then edit it and
+    `conf/example.conf` in the gitolite source for details on what goes in
+    that file, syntax, etc.  Just add new repos as needed, and add new users
+    and give them permissions as required.  The users names should be exactly
+    the same as their keyfile names, but without the `.pub` extension
 
-      * add new repos as needed
+  * when done, commit your changes and push
-      * add new users and give them permissions as required.  The users names
-        should be exactly the same as their keyfile names, but without the
-        `.pub` extension
 
 #### specifying gitweb and daemon access
 
@@ -51,41 +51,6 @@ one-time setup you must do separately.  All this does is:
     value you specified for `$projects_list` when setting up gitweb)
   * for daemon, create the file `git-daemon-export-ok` in the repository
 
-`src/gl-compile-conf` will keep these files consistent with the config
+The "compile" script will keep these files consistent with the config settings
-settings -- this includes removing such settings if you remove "read"
+-- this includes removing such settings if you remove "read" permissions for
-permissions for the special usernames.
+the special usernames.
-
-#### compiling
-
-  * backup your `~/.ssh/authorized_keys` file if you feel nervous :-)
-      * that's "backup" as in "copy", not "move".  The next step won't work if
-        the file doesn't exist.  Even an empty one is fine but it must be
-        present
-      * if you don't have an `~/.ssh/authorized_keys` file at all, you may
-        have logged in with a password, which in turn might mean you are not
-        familiar with ssh and authkeys etc.  If so, please read up at least
-        [this](http://sitaramc.github.com/0-installing/9-gitolite-basics.html#IMPORTANT_overview_of_ssh),
-        and preferably also the man pages for sshd and sshd\_config, to make
-        sure you understand the security implications of what you are doing.
-        Once you have understood that, create at least an empty
-        `~/.ssh/authorized_keys` file before proceeding to the next step
-
-  * cd to `$GL_ADMINDIR` and run `src/gl-compile-conf`
-
-That should be it, really.  However, if you want to be doubly sure, or maybe
-the first couple of times you use it, you may want to check these:
-
-  * check the outputs
-
-      * `~/.ssh/authorized_keys` should contain one line for each "user" pub
-        key added, between two "marker" lines (which you should please please
-        not remove!).  The line should contain a "command=" pointing to a
-        `$GL_ADMINDIR/src/gl-auth-command` file, then some sshd restrictions, the
-        key, etc.
-      * `$GL_CONF_COMPILED` should contain an expanded list of the access
-        control rules.  It may look a little long, but it's fairly intuitive!
-
-  * if the run threw up any "initialising empty repo" messages, check the
-    individual repos (inside `$REPO_BASE`) if you wish.  Especially make sure
-    the `$REPO_BASE/[reponame].git/hooks/update` got copied OK and is
-    executable

doc/3-faq-tips-etc.mkd

@@ -5,19 +5,22 @@ In this document:
   * common errors and mistakes
   * git version dependency
   * other errors, warnings, notes...
+  * getting a tar file from a clone
   * differences from gitosis
       * simpler syntax
       * two levels of access rights checking
       * error checking the config file
       * delegating parts of the config file
       * easier to specify gitweb/daemon access
-      * built-in logging
+      * better logging
       * one user, many keys
+      * support for git installed outside default PATH
       * who am I?
   * other cool things
-      * developer specific branches
+      * "personal" branches
   * design choices
       * why we don't do "excludes"
+      * keeping the parser and the access control separate
 
 ### common errors and mistakes
 
@@ -37,10 +40,10 @@ In this document:
 Here's a workaround for a version dependency that the normal flow of gitolite
 has.
 
-When you edit your config file to create a new repo, and run
+When you edit your config file to create a new repo, and push the changes to
-`src/gl-compile-conf`, gitolite creates an empty, bare repo for you.
+the server, gitolite creates an empty, bare repo for you.  Normally, you're
-Normally, you're expected to clone this on the client side, and start working
+expected to clone this on the client side, and start working -- make your
--- make your first commit(s), then push, etc.
+first commit(s), then push, etc.
 
 However, cloning an empty repo requires a server side git version that is at
 least 1.6.2.  Gitolite detects this when creating a repo, and warns you.
@@ -74,21 +77,27 @@ normal way, since it's not empty anymore.
 
   * if you specify a repo that is not at the top level `$REPO_BASE`, be sure
     to manually create the intermediate directories first.  For instance if
-    you specify a new repo called "a/b/c" to the config file and "compile",
+    you specify a new repo called "a/b/c" to the config file and push, the
-    the "compile" script will just `mkdir a/b/c.git`, assuming "a/b" has
+    "compile" script will just `mkdir a/b/c.git`, assuming "a/b" has already
-    already been created
+    been created
-
-  * if you run `git init` inside `$GL_ADMINDIR` (that is, make it a normal,
-    non-bare, repo), then, everytime you "compile" (run
-    `src/gl-compile-conf`), any changes to `conf` and `keydir` will
-    automatically be committed.  This is a simple safety net in case you
-    accidentally delete the whole config or something.  Also see
-    [4-push-to-admin.mkd](http://github.com/sitaramc/gitolite/blob/pu/doc/4-push-to-admin.mkd)
-    if you really know what you're doing and want "push to admin"
 
   * gitweb not able to read your repos?  You can change the umask for newly
     created repos to something more relaxed -- see the `~/.gitolite.rc` file
 
+### getting a tar file from a clone
+
+You can clone the repo from github or indefero, then execute a make command to
+extract a tar file of the branch you want.  Please use the make command, not a
+plain "git archive", because the Makefile adds a file called
+`.GITOLITE-VERSION` that will help you identify which version you are using.
+
+    git clone git://github.com/sitaramc/gitolite.git
+            # (OR)
+    git clone git://sitaramc.indefero.net/sitaramc/gitolite.git
+    cd gitolite
+    make master.tar
+    # or maybe "make rebel.tar" or "make pu.tar"
+
 ### differences from gitosis
 
 Apart from the big ones listed in the top level README, and subjective ones
@@ -176,9 +185,8 @@ gitosis does not do any.  I just found out that if you mis-spell `members` as
 `member`, gitosis will silently ignore it, and leave you wondering why access
 was denied.
 
-In gitolite, you have to "compile" the config file first (this step takes the
+Gitolite "compiles" the config file first and keyword typos *are* caught so
-place of the commit+push in gitosis), and keyword typos *are* caught so you
+you know right away.
-know right away.
 
 #### delegating parts of the config file
 
@@ -219,24 +227,21 @@ bits and pieces.  Here's an example, using short repo names for convenience:
     repo r2
     # ...and so on...
 
-#### built-in logging
+#### better logging
 
-...just in case of emergency :-)
+If you have been too liberal with the permission to rewind, it has built-in
+logging as an emergency fallback if someone goes too far, or for audit
+purposes [`*`].  The logfile names and location are configurable, and can
+include the year/month/day etc in the filename for easy archival or further
+processing.  The log file even tells you which pattern in the config file
+matched to allow that specific access to proceed.
 
-Let's say you gave a dev the right to rewind a branch and he went and rewound
+>   [`*`] setting `core.logAllRefUpdates true` does provide a safety net
-it all the way, or pushed something drastically different on it.  Now you need
+>   against over-zealous rewinds, but it does not tell you "who".  And
-to recover the commit that got wiped out.
+>   strangely, management does not seem to share the view that "blame" is just
+>   a synonym for "annotate" ;-)]
 
-If you'd remembered to `git config core.logAllRefUpdates` for that repo, or
+The log lines look like this:
-globally, you'd be fine -- the reflog will tell you.  Otherwise you'd be left
-grubbing around in `git fsck --unreachable` a bit :-(
-
-And even if you recover the correct commit, you'll never know *who* did it --
-not unless you add a one-line patch to gitosis, plus a `post-receive` hook to
-every repository.
-
-With gitolite, there's a log file in `$GL_ADMINDIR` that contains lines like
-this:
 
     2009-09-19.10:24:37  +  b4e76569659939  4fb16f2a88d8b5  myrepo refs/heads/master       user2   refs/heads/master
 
@@ -259,9 +264,35 @@ each of my pubkeys.  In gitolite, we keep them separate: "sitaram@laptop.pub"
 and "sitaram@desktop.pub".  The part before the "@" is the username, so
 gitolite knows these two keys belong to the same person.
 
+Note that you don't say "sitaram@laptop" and so on in the **config** file --
+as far as the config file is concerned there's just **one** user called
+"sitaram" -- so you only say "sitaram" there.  Only the **pubkey files** have
+the extra "@" stuff.
+
 I think this is easier to maintain if you have to delete or change one of
 those keys.
 
+#### support for git installed outside default PATH
+
+The normal solution is to add to the system default PATH somehow, either by
+munging `/etc/profile` or by enabling `PermitUserEnvironment` in
+`/etc/ssh/sshd_config` and then setting the PATH in `~/.ssh/.environment`.
+All these are security risks because they allow a lot more than just you and
+your git install :-)
+
+And if you don't have root, you can't do this anyway.
+
+The only solution till now has been to ask every client to set the config
+parameters `remote.<name>.receivepack` and `remote.<name>.uploadpack`.  But
+telling *every* client to do so is a pain...
+
+Gitolite lets you specify the directory in which git binaries are to be found,
+via a new variable (`$GIT_PATH`) in the "rc" file.  If this variable is
+non-empty, it will be appended to the PATH environment variable before
+attempting to run git stuff.
+
+Very easy, very simple, and completely transparent to the users :-)
+
 #### who am I?
 
 As a developer, I send a file called `id_rsa.pub` to the gitolite admin.  He
@@ -283,33 +314,31 @@ In gitolite, it's simple: just ask nicely :-)
 
 ### other cool things
 
-#### developer specific branches
+#### "personal" branches
 
-So I know what gitolite calls me.  Big deal... who cares?
+"personal" branches are great for corporate environments, where
+unauthenticated pull/clone is a no-no.  Since a dev workstation cannot do
+authentication, even work shared just between 2 devs has to go *via* the
+server.  This causes the same branch name clutter as in a centralised VCS,
+plus setting up permissions for this becomes a chore for the admin.
 
-Here is an idea: give every developer a personal "scratch" namespace within
+gitolite lets you define a "personal" or "scratch" namespace prefix for
-which she can create, rewind, or delete any branch.  For example, I would own
+each developer (e.g., `refs/personal/<devname>/*`), with full
-anything under
+permissions for that dev and read-only for everyone else.  And you get
+this without adding a single line to the access config file -- pretty
+much fire and forget as far as the admin is concerned, even if there is
+constant churn in the project teams.
 
-    $PERSONAL_BRANCH_PREFIX/sitaram/
+Not bad for something that took just *one* line of code to implement.
+And that's one clean, readable, line, by the way ;-)
 
-The admin could set `$PERSONAL_BRANCH_PREFIX` in the rc file and communicate
+The admin would set `$PERSONAL_BRANCH_PREFIX` in the rc file and communicate
 this to all users.  It could be something like `refs/heads/personal`, which
 means all such branches will show up in `git branch` lookups and `git clone`
 will fetch them.  Or he could use, say, `refs/personal`, which means it won't
 show up in any normal "branch-y" commands and stuff, and generally be much
 less noisy.
 
-Yes, I know git is all about allowing private branches, but in a corporate
-environment it's not always possible to pull from a co-worker, for the same
-reasons you don't have anonymous access (like the git:// protocol).  A normal
-developer workstation cannot do authentication, so how would they know who's
-pulling?  This is a perfect way to share code *without* cluttering the global
-namespace, and each developer controls his/her own set of branches!
-
-The amount of code needed?  *One line!*  I'll spend about 3x more on declaring
-and initialising the new variable, and 30x more on documenting it :-)
-
 **Note that a user who has NO write access cannot have personal branches**; if
 you read the section (above) on "two levels of access rights checking" you'll
 understand why.
@@ -341,8 +370,31 @@ Just don't *show* the user this config file; it might sound insulting :-)
 
 ### design choices
 
+#### keeping the parser and the access control separate
+
+There are two programs concerned with access control:
+
+  * `gl-auth-command`, the program that is run via `~/.ssh/authorized_keys`;
+    this decides whether git should even be allowed to run (basic R/W/no
+    access).  (This one cannot decide on the branch-level access; it is not
+    known at this point what branch is being accessed)
+  * the update-hook on each repo, which decides the per-branch permissions
+
+I have chosen to keep the relatively complex task of parsing the config file
+out of them to keep them simpler (and faster).  So any changes to the config
+have to be first "compiled", and the access control programs use this
+"compiled" version of the config.  (The compile step also refreshes
+`~/.ssh/authorized_keys`).
+
+If you choose the "easy install" method, all this is quite transparent to you
+anyway.  If you cannot use the easy install and must install manually, I have
+clear instructions on how to set it up.
+
 #### why we don't do "excludes"
 
+[umm... having said all this, I implemented it anyway; see the "rebel"
+branch!]
+
 I found an error in the example conf file.  This snippet *seems* to say that
 "bruce" can write versioned tags (`refs/tags/v[0-9].*`), but the other
 staffers can't:
@@ -387,3 +439,5 @@ The lack of overlap between refexes ensures ***no confusion*** in specifying,
 understanding, and ***auditing***, what is allowed and what is not.
 
 And in security, "no confusion" is a good thing :-)
+
+

doc/4-push-to-admin.mkd

@@ -1,5 +1,10 @@
 # "push to admin" in gitolite
 
+**WARNING: THIS DOCUMENT IS OBSOLETE.  DO NOT USE.  IT IS RETAINED ONLY FOR
+HISTORICAL PURPOSES**.  Gitolite now does "push-to-admin" by default, and does
+it very easily and simply by front-loading the ssh problem.  See the install
+doc for details.
+
 ----
 
 Gitosis's default mode of admin is by cloning and pushing the `gitosis-admin`

src/00-easy-install.sh

@@ -0,0 +1,362 @@
+#!/bin/bash
+
+# easy install for gitolite
+
+# you run this on the client side, and it takes care of all the server side
+# work.  You don't have to do anything on the server side directly
+
+# to do a manual install (since I have tested this only on Linux), open this
+# script in a nice, syntax coloring, text editor and follow the instructions
+# prefixed by the word "MANUAL" in the comments below :-)
+
+# run without any arguments for "usage" info
+
+# important setting: bail on any errors (else we have to check every single
+# command!)
+set -e
+
+die() { echo "$@"; echo; echo "run $0 again without any arguments for help and tips"; exit 1; }
+prompt() {
+    echo
+    echo
+    echo ------------------------------------------------------------------------
+    echo "    $1"
+    echo
+    read -p '...press enter to continue or Ctrl-C to bail out'
+}
+usage() {
+    cat <<EOFU
+Usage: $0 user host port admin_name
+  - "user" is the username on the server where you will be installing gitolite
+  - "host" is that server's hostname (or IP address is also fine)
+  - "port" is optional
+  - "admin_name" is *your* name as you want it to appear in the eventual
+    gitolite config file
+
+Example usage: $0 git my.git.server sitaram
+
+Output:
+  - a proper gitolite admin repo in $HOME/gitolite-admin
+
+Notes:
+  - "user" and "admin_name" must be simple names -- no special characters etc
+    please (only alphanumerics, dot, hyphen, underscore)
+  - traditionally, the "user" is "git", but it can be anything you want
+  - "admin_name" should be your name, for clarity, or whoever will be the
+    gitolite admin
+
+Pre-requisites:
+  - you must run this from the gitolite working tree top level directory.
+    This means you run this as "src/00-easy-install.sh"
+  - you must already have pubkey based access to user@host.  If you currently
+    only have password access, use "ssh-copy-id" or something.  Somehow get to
+    the point where you can type "ssh user@host" and get a command line.  Run
+    this program only after that is done
+
+Errors:
+  - if you get a "pubkey [...filename...] exists" error, it is either leftover
+    from a previous, failed, run, or a genuine file you need.  Decide which it
+    is, and remove it and retry, or use a different "admin_name", respectively.
+
+EOFU
+    exit 1;
+}
+
+# ----------------------------------------------------------------------
+# basic sanity / argument checks
+# ----------------------------------------------------------------------
+
+# MANUAL: this *must* be run as "src/00-easy-install.sh", not by cd-ing to src
+# and then running "./00-easy-install.sh"
+
+[[ $0 =~ ^src/00-easy-install.sh$ ]] ||
+{
+    echo "please cd to the gitolite repo top level directory and run this as
+    'src/00-easy-install.sh'"
+    exit 1;
+}
+
+# MANUAL: (info) we'll use "git" as the user, "server" as the host, and
+# "sitaram" as the admin_name in example commands shown below, if any
+
+[[ -z $3 ]] && usage
+user=$1
+host=$2
+admin_name=$3
+# but if the 3rd arg is a number, that's a port number, and the 4th arg is the
+# admin_name
+port=22
+[[ $3 =~ ^[0-9]+$ ]] && {
+    port=$3
+    [[ -z $4 ]] && usage
+    admin_name=$4
+}
+
+[[ "$user" =~ [^a-zA-Z0-9._-] ]] && die "user '$user' invalid"
+[[ "$admin_name" =~ [^a-zA-Z0-9._-] ]] && die "admin_name '$admin_name' invalid"
+
+# MANUAL: make sure you're in the gitolite directory, at the top level.
+# The following files should all be visible:
+
+ls src/gl-auth-command  \
+    src/gl-compile-conf \
+    src/install.pl  \
+    src/update-hook.pl  \
+    conf/example.conf   \
+    conf/example.gitolite.rc    >/dev/null ||
+    die "cant find at least some files in gitolite sources/config; aborting"
+
+# MANUAL: make sure you have password-less (pubkey) auth on the server.  That
+# is, running "ssh git@server" should log in straight away, without asking for
+# a password
+
+ssh -p $port -o PasswordAuthentication=no $user@$host true ||
+    die "pubkey access didn't work; please set it up using 'ssh-copy-id' or something"
+
+# MANUAL: make sure there's no "gitolite-admin" directory in $HOME (actually
+# for the manual flow this doesn't matter so much!)
+
+[[ -d $HOME/gitolite-admin ]] &&
+    die "please delete or move aside the \$HOME/gitolite-admin directory"
+
+# MANUAL: create a new key for you as a "gitolite user" (as opposed to you as
+# the "gitolite admin" who needs to login to the server and get a command
+# line).  For example, "ssh-keygen -t rsa ~/.ssh/sitaram"; this would create
+# two files in ~/.ssh (sitaram and sitaram.pub)
+
+prompt "the next command will create a new keypair for your gitolite access
+
+    The pubkey will be $HOME/.ssh/$admin_name.pub.  You will have to
+    choose a passphrase or hit enter for none.  I recommend not having a
+    passphrase for now, and adding one with 'ssh-keygen -p' *as soon as*
+    all the setup is done and you've successfully cloned and pushed the
+    gitolite-admin repo.
+
+    After that, I suggest you (1) install 'keychain' or something
+    similar, and (2) add the following command to your bashrc (since
+    this is a non-default key)
+
+        ssh-add \$HOME/.ssh/$admin_name
+
+    This makes using passphrases very convenient."
+
+if [[ -f $HOME/.ssh/$admin_name.pub ]]
+then
+    prompt "Hmmm... pubkey $HOME/.ssh/$admin_name.pub exists; should I just re-use it?
+    Be sure you remember the passphrase, if you gave one when you created it!"
+else
+    ssh-keygen -t rsa -f $HOME/.ssh/$admin_name || die "ssh-keygen failed for some reason..."
+fi
+
+# MANUAL: copy the pubkey created to the server, say to /tmp.  This would be
+# "scp ~/.ssh/sitaram.pub git@server:/tmp" (the script does this at a later
+# stage, you do it now for convenience).  Note: only the pubkey (sitaram.pub).
+# Do NOT copy the ~/.ssh/sitaram file -- that is a private key!
+
+# MANUAL: if you're running ssh-agent (see if you have an environment variable
+# called SSH_AGENT_PID in your "env"), you should add this new key.  The
+# command is "ssh-add ~/.ssh/sitaram"
+
+if ssh-add -l &>/dev/null
+then
+    prompt "you're running ssh-agent.  We'll try and do an ssh-add of the
+    private key we just created, otherwise this key won't get picked up.  If
+    you specified a passphrase in the previous step, you'll get asked for one
+    now -- type in the same one."
+
+    ssh-add $HOME/.ssh/$admin_name
+fi
+
+# MANUAL: you now need to add some lines to the end of your ~/.ssh/config
+# file.  If the file doesn't exist, create it.  Make sure the file is "chmod
+# 644".
+
+# The lines to be included look like this:
+
+#   host gitolite
+#       user git
+#       hostname server
+#       port 22
+#       identityfile ~/.ssh/sitaram
+
+echo "
+host gitolite
+     user $user
+     hostname $host
+     port $port
+     identityfile ~/.ssh/$admin_name" > $HOME/.ssh/.gl-stanza
+
+if grep 'host  *gitolite' $HOME/.ssh/config &>/dev/null
+then
+    prompt "your \$HOME/.ssh/config already has settings for gitolite.  I will
+    assume they're correct, but if they're not, please edit that file, delete
+    that paragraph (that line and the following few lines), Ctrl-C, and rerun.
+
+    In case you want to check right now (from another terminal) if they're
+    correct, here's what they are *supposed* to look like:
+$(cat ~/.ssh/.gl-stanza)"
+
+else
+    prompt "creating settings for your gitolite access in $HOME/.ssh/config;
+    these are the lines that will be appended to your ~/.ssh/config:
+$(cat ~/.ssh/.gl-stanza)"
+
+    cat $HOME/.ssh/.gl-stanza >> $HOME/.ssh/config
+    # if the file didn't exist at all, it might have the wrong permissions
+    chmod 644 $HOME/.ssh/config
+fi
+rm  $HOME/.ssh/.gl-stanza
+
+# ----------------------------------------------------------------------
+# client side stuff almost done; server side now
+# ----------------------------------------------------------------------
+
+# MANUAL: copy the gitolite directories "src", "conf", and "doc" to the
+# server, to a directory called (for example) "gitolite-install".  You may
+# have to create the directory first.
+
+ssh -p $port $user@$host mkdir -p gitolite-install
+rsync -e "ssh -p $port" -a src conf doc $user@$host:gitolite-install/
+
+# MANUAL: now log on to the server (ssh git@server) and get a command line.
+# This step is for your convenience; the script does it all from the client
+# side but that may be too much typing for manual use ;-)
+
+# MANUAL: cd to the "gitolite-install" directory where the sources are.  Then
+# copy conf/example.gitolite.rc as ~/.gitolite.rc and edit it if you wish to
+# change any paths.  Make a note of the GL_ADMINDIR and REPO_BASE paths; you
+# will need them later
+
+prompt "the gitolite rc file needs to be edited by hand.  The defaults
+    are sensible, so if you wish, you can just exit the editor.
+
+    Otherwise, make any changes you wish and save it.  Read the comments to
+    understand what is what -- the rc file's documentation is inline.
+
+    Please remember this file will actually be copied to the server, and that
+    all the paths etc. represent paths on the server!"
+
+# lets try and get the file from there first
+if scp -P $port $user@$host:.gitolite.rc .
+then
+    prompt "Oh hey... you already had a '.gitolite.rc' file on the server.
+    Let's see if we can use that instead of the default one..."
+    sort < .gitolite.rc             | perl -ne 'print "$1\n" if /^(\$\w+) *=/' > glrc.old
+    sort < conf/example.gitolite.rc | perl -ne 'print "$1\n" if /^(\$\w+) *=/' > glrc.new
+    if diff -u glrc.old glrc.new
+    then
+        ${VISUAL:-${EDITOR:-vi}} .gitolite.rc
+    else
+        prompt "    looks like you're upgrading!  I'm going to run your editor
+        with *both* the old and the new files (in that order), so you can add
+        in the lines pertaining to the variables shown with a '+' sign in the
+        above diff.  This is necessary; please dont skip this
+
+        [It's upto you to figure out how your editor handles 2 filename
+        arguments, switch between them, copy lines, etc ;-)]"
+        ${VISUAL:-${EDITOR:-vi}} .gitolite.rc conf/example.gitolite.rc
+    fi
+else
+    cp conf/example.gitolite.rc .gitolite.rc
+    ${VISUAL:-${EDITOR:-vi}} .gitolite.rc
+fi
+
+# copy the rc across
+scp -P $port .gitolite.rc $user@$host:
+
+prompt "ignore any 'please edit this file' or 'run this command' type
+    lines in the next set of command outputs coming up.  They're only relevant
+    for a manual install, not this one..."
+
+# extract the GL_ADMINDIR and REPO_BASE locations
+GL_ADMINDIR=$(ssh -p $port $user@$host "perl -e 'do \".gitolite.rc\"; print \$GL_ADMINDIR'")
+REPO_BASE=$(  ssh -p $port $user@$host "perl -e 'do \".gitolite.rc\"; print \$REPO_BASE'")
+
+# MANUAL: still in the "gitolite-install" directory?  Good.  Run
+# "src/install.pl"
+
+ssh -p $port $user@$host "cd gitolite-install; src/install.pl"
+
+# MANUAL: setup the initial config file.  Edit $GL_ADMINDIR/conf/gitolite.conf
+# and add at least the following lines to it:
+
+#   repo gitolite-admin
+#       RW+                 = sitaram
+
+echo "#gitolite conf
+#please see conf/example.conf for details on syntax and features
+
+repo gitolite-admin
+    RW+                 = $admin_name
+
+repo testing
+    RW+                 = @all
+
+" > gitolite.conf
+
+# send the config and the key to the remote
+scp -P $port gitolite.conf $user@$host:$GL_ADMINDIR/conf/
+
+scp -P $port $HOME/.ssh/$admin_name.pub $user@$host:$GL_ADMINDIR/keydir
+
+# MANUAL: cd to $GL_ADMINDIR and run "src/gl-compile-conf"
+
+ssh -p $port $user@$host "cd $GL_ADMINDIR; src/gl-compile-conf"
+
+# ----------------------------------------------------------------------
+# hey lets go the whole hog on this; setup push-to-admin!
+# ----------------------------------------------------------------------
+
+# MANUAL: make the first commit in the admin repo.  This is a little more
+# complex, so read carefully and substitute the correct paths.  What you have
+# to do is:
+
+#   cd $REPO_BASE/gitolite-admin.git
+#   GIT_WORK_TREE=$GL_ADMINDIR git add conf/gitolite.conf keydir
+#   GIT_WORK_TREE=$GL_ADMINDIR git commit -am start
+
+# Substitute $GL_ADMINDIR and $REPO_BASE appropriately.  Note there is no
+# space around the "=" in the second and third lines.
+
+echo "cd $REPO_BASE/gitolite-admin.git
+GIT_WORK_TREE=$GL_ADMINDIR git add conf/gitolite.conf keydir
+GIT_WORK_TREE=$GL_ADMINDIR git commit -am start --allow-empty
+" | ssh -p $port $user@$host
+
+# MANUAL: now that the admin repo is created, you have to set the hooks
+# properly.  The install program does this.  So cd back to the
+# "gitolite-install" directory and run "src/install.pl"
+
+ssh -p $port $user@$host "cd gitolite-install; src/install.pl"
+
+prompt "now we will clone the gitolite-admin repo to your workstation
+    and see if it all hangs together.  We'll do this in your \$HOME for now,
+    and you can move it elsewhere later if you wish to."
+
+# MANUAL: you're done!  Log out of the server, come back to your workstation,
+# and clone the admin repo using "git clone gitolite:gitolite-admin.git"!
+
+cd $HOME
+git clone gitolite:gitolite-admin.git
+
+# MANUAL: be sure to read the message below; this applies to you too...
+
+echo
+echo
+echo ------------------------------------------------------------------------
+echo "Cool -- we're done.  Now you can edit the config file (currently
+in ~/gitolite-admin/conf/gitolite.conf) to add more repos, users, etc.
+When done, 'git add' the changed files, 'git commit' and 'git push'.
+
+Read the comments in conf/example.conf for information about the config
+file format -- like the rc file, this also has inline documentation.
+
+Your URL for cloning any repo on this server will be
+
+    gitolite:reponame.git
+
+However, any other users you set up will have to use
+
+    $user@$host:reponame.git
+
+unless they also create similar settings in their '.ssh/config' file."

src/gl-auth-command

@@ -24,13 +24,16 @@ use warnings;
 # ----------------------------------------------------------------------------
 
 
-our ($GL_LOGT, $GL_CONF_COMPILED, $REPO_BASE);
+our ($GL_LOGT, $GL_CONF_COMPILED, $REPO_BASE, $GIT_PATH);
 our %repos;
 
 my $glrc = $ENV{HOME} . "/.gitolite.rc";
 die "parse $glrc failed: "             . ($! or $@) unless do $glrc;
 die "parse $GL_CONF_COMPILED failed: " . ($! or $@) unless do $GL_CONF_COMPILED;
 
+# add a custom path for git binaries, if specified
+$ENV{PATH} .= ":$GIT_PATH" if $GIT_PATH;
+
 # ----------------------------------------------------------------------------
 #       definitions specific to this program
 # ----------------------------------------------------------------------------

src/gl-compile-conf

@@ -47,7 +47,7 @@ $Data::Dumper::Indent = 1;
 #       common definitions
 # ----------------------------------------------------------------------------
 
-our ($GL_ADMINDIR, $GL_CONF, $GL_KEYDIR, $GL_CONF_COMPILED, $REPO_BASE, $REPO_UMASK, $PROJECTS_LIST);
+our ($GL_ADMINDIR, $GL_CONF, $GL_KEYDIR, $GL_CONF_COMPILED, $REPO_BASE, $REPO_UMASK, $PROJECTS_LIST, $GIT_PATH);
 
 # now that this thing *may* be run via "push to admin", any errors have to
 # grab the admin's ATTENTION so he won't miss them among the other messages a
@@ -57,6 +57,9 @@ my $ATTN = "\n\t\t***** ERROR *****\n       ";
 my $glrc = $ENV{HOME} . "/.gitolite.rc";
 die "$ATTN parse $glrc failed: " . ($! or $@) unless do $glrc;
 
+# add a custom path for git binaries, if specified
+$ENV{PATH} .= ":$GIT_PATH" if $GIT_PATH;
+
 # ----------------------------------------------------------------------------
 #       definitions specific to this program
 # ----------------------------------------------------------------------------

src/install.pl

@@ -3,7 +3,7 @@
 use strict;
 use warnings;
 
-our ($REPO_BASE, $GL_ADMINDIR, $GL_CONF);
+our ($REPO_BASE, $GL_ADMINDIR, $GL_CONF, $GIT_PATH);
 
 # wrapper around mkdir; it's not an error if the directory exists, but it is
 # an error if it doesn't exist and we can't create it
@@ -33,6 +33,9 @@ unless (-f $glrc) {
 # ok now $glrc exists; read it to get the other paths
 die "parse $glrc failed: " . ($! or $@) unless do $glrc;
 
+# add a custom path for git binaries, if specified
+$ENV{PATH} .= ":$GIT_PATH" if $GIT_PATH;
+
 # mkdir $REPO_BASE, $GL_ADMINDIR if they don't already exist
 my $repo_base_abs = ( $REPO_BASE =~ m(^/) ? $REPO_BASE : "$ENV{HOME}/$REPO_BASE" );
 wrap_mkdir($repo_base_abs);
@@ -66,7 +69,10 @@ for my $repo (`find . -type d -name "*.git"`) {
 }
 
 # oh and one of those repos is a bit more special and has an extra hook :)
-system("cp $GL_ADMINDIR/src/pta-hook.sh gitolite-admin.git/hooks/post-update");
+if ( -d "gitolite-admin.git/hooks" ) {
+    print STDERR "copying post-update hook to gitolite-admin repo...\n";
+    system("cp -v $GL_ADMINDIR/src/pta-hook.sh gitolite-admin.git/hooks/post-update");
     system("perl", "-i", "-p", "-e", "s(export GL_ADMINDIR=.*)(export GL_ADMINDIR=$GL_ADMINDIR)",
         "gitolite-admin.git/hooks/post-update");
     chmod 0755, "gitolite-admin.git/hooks/post-update";
+}