gitolite/doc/big-config.mkd

# F=bc what is a "big-config"

This document is just background info; you don't actually need to read the
whole thing if you don't care.  All you need to do is set `BIG_CONFIG` to 1 in
the rc file and you're done.  If you have no use for gitweb, git-daemon, or
[git config][rsgc], you can save even more time by setting
`GL_NO_DAEMON_NO_GITWEB`.

Finally, if you're *really* an expert (or your initials are "JK"), you can
even set `GL_NO_CREATE_REPOS` and `GL_NO_SETUP_AUTHKEYS`.  However, be warned
that if you're not sufficiently clueful, those last 2 variables could have a
[security impact][rcsecurity].

## when/why do we need it?

A "big config" is anything that has a few thousand users and a few thousand
repos, resulting in a very large 'compiled' config file.

### the problem

To understand the problem, consider what happens if you have something like
this in your gitolite conf file:

    @wbr    =   lynx firefox
    @devs   =   alice bob

    repo @wbr
        RW+     next    =   @devs
        RW    master    =   @devs

Without the 'big config' setting, gitolite internally translates this to:

    repo lynx firefox
        RW+     next    =   alice bob
        RW    master    =   alice bob

and then generates the actual config rules once for each user-repo-ref
combination (there are 8 combinations above); the compiled config file looks
somewhat like [this][bigno_].

Of course, the output is the same whether you used groups (like `@wbr` and
`@devs` in the example above) or listed the repos directly on the 'repo'
lines.

Anyway, you can imagine what that does when you have 10,000 users and 10,000
repos.  Let's just say it's not pretty :)

## how do we use it?

Just set

    $GL_BIG_CONFIG = 1;

in the `~/.gitolite.rc` file on the server (see next section for more
variables).  When you do that, and push this configuration, one of two things
happens.

### access rules for groups

If you used group names in the 'repo' lines (as in `repo @wbr`), then the
compiled config looks like [this][bigyes_].

That's a lot smaller, and allows orders of magintude more repos and groups to
be supported.

### access rules for individual repos (split config)

If, on the other hand, you had the repos listed individually, (as in `repo
lynx firefox`), then the main config file would now look like this:

    %repos = ();
    %split_conf = (
      'firefox' => 1,
      'lynx' => 1
    );

And each individual repo's configuration would go its own directory.  For
instance, `~/repositories/lynx.git/gl-conf` would look like this:

    %one_repo = (
      'lynx' => {
        'R' => {
          'alice' => 1,
          'bob' => 1
        },
        'W' => {
          'alice' => 1,
          'bob' => 1
        },
        'alice' => [
          [
            0,
            'refs/heads/next',
            'RW+'
          ],
          [
            4,
            'refs/heads/master',
            'RW'
          ]
        ],
        'bob' => [
          [
            1,
            'refs/heads/next',
            'RW+'
          ],
          [
            5,
            'refs/heads/master',
            'RW'
          ]
        ]
      }
    );

That does not reduce the overall size of the repo config (because you did not
group the repos), but the main repo config is now even smaller!

## what are the downsides?

There are some downsides.

The following apply if individual ("split") conf files are written, which in
turn only happens if you used repo names instead of group names on the `repo`
lines:

  * the compile (gitolite-admin push) is now slower, because it potentially
    has to write a few thousand small files instead of one large one.  Since
    the compile should be relatively infrequent compared to developer access,
    this is ok -- the main config file is parsed much faster now, so every hit
    to the server will benefit.

  * we can no longer distinguish 'repo not found on disk' from 'you dont have
    access'.  They both now look like 'you dont have access'.

## other optimisations

### disabling various defaults

The default RC file contains the following lines (we've already discussed the
first one):

    $GL_BIG_CONFIG = 0;
    $GL_NO_DAEMON_NO_GITWEB = 0;
    $GL_NO_CREATE_REPOS = 0;
    $GL_NO_SETUP_AUTHKEYS = 0;

`GL_NO_DAEMON_NO_GITWEB` is a very useful optimisation that you *must* enable
if you *do* have a large number of repositories, and do *not* use gitolite's
support for gitweb or git-daemon access (see "[this][gwd]" for details).  This
will save a lot of time when you push the gitolite-admin repo with changes.
This variable also controls whether "git config" lines (such as `config
hooks.emailprefix = "[gitolite]"`) will be processed or not.

You should be a lot more careful with `GL_NO_CREATE_REPOS` and
`GL_NO_SETUP_AUTHKEYS`.  These are meant for installations where some backend
system already exists that does all the actual repo creation, (including
setting up the proper hooks -- very important for access control), and all the
authentication setup (ssh auth keys), respectively.

Summary: Please **leave those two variables alone** unless you're initials are
"JK" ;-)

### #authkeyopt optimising the authkeys file

Sshd does a linear scan of the `~/.ssh/authorized_keys` file when an incoming
connection shows up.  This means that keys found near the top get served
faster than keys near the bottom.  On my laptop, it takes about 2500 keys
before I notice the delay; on a typical server it could be double that, so
don't worry about all this unless your user-count is in that range.

One way to deal with 5000+ keys is to use customised, database-backed ssh
daemons, but many people are uncomfortable with taking non-standard versions
of such a critical piece of the security infrastructure.  In addition, most
distributions do not make it painless to use them.

So what do you do?

The following trick uses the Pareto principle (a.k.a the "80-20 rule")
to get an immediate boost in response for the most frequent or prolific
developers.  It can allow you to ignore the problem until the next big
increase in your user counts!

Here's how:

  * create subdirectories of keydir/ called 0, 1, (maybe 2, 3, etc., also),
    and 9.
  * in 0/, put in the pubkeys of the most frequent users
  * in 1/, add the next most important set of users, and so on for 2, 3, etc.
  * finally, put all the rest in 9/

Make sure "9" contains at least 70-90% of the total number of pubkeys,
otherwise this doesn't really help.

You can easily determine who your top users are by runnning something like
this (note the clever date command that always gets you last months log file!)

    cat .gitolite/logs/gitolite-`date +%Y-%m -d -30days`.log |
        cut -f2 | sort | uniq -c | sort -n -r

## F=ldap storing usergroup information outside gitolite (like in LDAP)

[Please NOTE: this is all about *user* groups, not *repo* groups]

[WARNING: the earlier method of doing this has been discontinued; please see
the commit message for details]

Gitolite now allows usergroup information to be stored outside its own config
file.  We'll see "why" first, then the "how".

### #ldapwhy_ why

Large sites often have LDAP servers that already contain user and group
information, including group membership details.  Such sites may prefer that
gitolite just pick up that info instead of having to redundantly put it in
gitolite's config file.

Consider this example config for one repo:

    repo foo
        RW+ =   @lead_devs
        RW  =   @devs
        R   =   @interns

Normally, you would also need to specify:

    @lead_devs  =   dilbert alice
    @devs       =   wally
    @interns    =   ashok

However, if the corporate LDAP server already tags these people correctly, and
if there is some way of getting that information out **at run time**, that
would be cool.

### #ldaphow_ how

All you need is a script that, given a username, queries your LDAP or similar
server, and returns a space-separated list of all the groups she is a member
of.  If an invalid user name is sent in, or the user is valid but is not part
of any groups, it should print nothing.

This script will probably be specific to your site.  (See contrib/ldap for some
example scripts that were contributed by the Nokia MeeGo team.)

Then set the `$GL_GET_MEMBERSHIPS_PGM` variable in the rc file to the full
path of this program, set `$GL_BIG_CONFIG` to 1, and that will be that.

## implementation notes

To understand how big-config works (at least when you're using grouped repos),
we'll first look at how it works without this setting.  Think back to the
example at the top, and assume 'alice' is accessing the 'lynx' repo.  The
various rights are governed by the following hash elements:

    # for the first level checks
    $repos{'lynx'}{'R'}{'alice'} = 1
    $repos{'lynx'}{'W'}{'alice'} = 1

    # for the second level checks
    $repos{'lynx'}{'alice'}{'refs/heads/master'} = 'RW';
    $repos{'lynx'}{'alice'}{'refs/heads/next'} = 'RW+';

Those elements are explicitly specified in the compiled hash, as you can see
(you don't need to know perl too much to read a hash; just make some educated
guesses if needed!)

Now look at the compiled hash produced when `GL_BIG_CONFIG` is set.  In place
of both 'firefox' and 'lynx' you have '@wbr', and similarly '@devs' for both
'alice' and 'bob'.  In addition, there is a group hash at the bottom that
lists each group and its members.

When 'alice' tries to access the 'lynx' repo, gitolite collects all the group
names that these names belong to, so '@devs' is added to the list of 'user'
names that 'alice' inherits permissions from, and '@wbr' is added to the list
of 'repo' names that 'lynx' inherits from.  This means that the final access
inherits all permissions pertaining to the following combinations:

    alice, lynx
    alice, @wbr
    @devs, lynx
    @devs, @wbr

(Actually there are 3 more... try and guess what they may be!)

Anyway, all ACL rules for these combinations are clubbed together to make the
composite set of rules that 'alice' accessing 'lynx' is subject to.

## config listings

### F=bigno_ compiled config with big-config disabled

    %repos = (
      'firefox' => {
        'R' => {
          'alice' => 1,
          'bob' => 1
        },
        'W' => {
          'alice' => 1,
          'bob' => 1
        },
        'alice' => [
          [
            0,
            'refs/heads/next',
            'RW+'
          ],
          [
            4,
            'refs/heads/master',
            'RW'
          ]
        ],
        'bob' => [
          [
            1,
            'refs/heads/next',
            'RW+'
          ],
          [
            5,
            'refs/heads/master',
            'RW'
          ]
        ]
      },
      'lynx' => {
        'R' => {
          'alice' => 1,
          'bob' => 1
        },
        'W' => {
          'alice' => 1,
          'bob' => 1
        },
        'alice' => [
          [
            2,
            'refs/heads/next',
            'RW+'
          ],
          [
            6,
            'refs/heads/master',
            'RW'
          ]
        ],
        'bob' => [
          [
            3,
            'refs/heads/next',
            'RW+'
          ],
          [
            7,
            'refs/heads/master',
            'RW'
          ]
        ]
      }
    );

Phew!

### F=bigyes_ compiled config with big-config enabled

    %repos = (
      '@wbr' => {
        '@devs' => [
          [
            0,
            'refs/heads/next',
            'RW+'
          ],
          [
            1,
            'refs/heads/master',
            'RW'
          ]
        ],
        'R' => {
          '@devs' => 1
        },
        'W' => {
          '@devs' => 1
        }
      }
    );
    %groups = (
      '@devs' => {
        'alice' => 'master',
        'bob' => 'master'
      },
      '@wbr' => {
        'firefox' => 'master',
        'lynx' => 'master'
      }
    );