gitolite/doc/6-ssh-troubleshooting.mkd

# ssh troubleshooting

Ssh has always been the biggest troublespot in all this.  While gitolite makes
it as easy as possible, you might still run into trouble sometimes.

In this document:

  * ssh sanity checks
  * explanation
      * files on the server
      * files on client
      * why two keys on client
  * more complex ssh setups
      * two gitolite servers to manage?
  * further reading

----

>   But before we get to all that, let's clarify that all this is applicable
>   **only** to the gitolite **admin**.  He's the only one who needs both a
>   shell and gitolite access, so he has **two** pubkeys in play.

>   Normal users have only one pubkey, since they are only allowed to access
>   gitolite itself.  They do not need to worry about any of this stuff, and
>   their repo urls are very simple, like: `git@my.git.server:reponame.git`.

----

### ssh sanity checks

There are two quick sanity checks you can run:

  * running `ssh gitolite` should get you a list of repos you have rights to
    access, as described [here][myrights]

[myrights]: http://github.com/sitaramc/gitolite/blob/pu/doc/3-faq-tips-etc.mkd#myrights

  * conversely, `ssh git@server` should get you a command line

If one or both of these does not work as expected, do this:

  * first, check that your `~/.ssh` has two public keys, like below:

        $ ls -al ~/.ssh/*.pub
        -rw-r--r-- 1 sitaram sitaram 409 2008-04-21 17:42 /home/sitaram/.ssh/id_rsa.pub
        -rw-r--r-- 1 sitaram sitaram 409 2009-10-15 16:25 /home/sitaram/.ssh/sitaram.pub

    If it doesn't you have either lost your keys or you're on the wrong
    machine.  As long as you have password access to the server you can alweys
    recover; just pretend you're installing from scratch and start over.

  * next, try running `ssh-add -l`.  On my desktop the output looks like this:

        2048 63:ea:ab:10:d2:4f:88:f4:85:cb:d3:7d:3a:83:37:9a /home/sitaram/.ssh/id_rsa (RSA)
        2048 d7:23:89:12:5f:22:4f:ad:54:7d:7e:f8:f5:2a:e9:13 /home/sitaram/.ssh/sitaram (RSA)

    If you get only one line (typically the top one), you should ssh-add the
    other one, using (in my case) `ssh-add ~/.ssh/sitaram`.

    If you get no output, add both of them and check `ssh-add -l` again.

    If this error keeps happening please consider installing [keychain][kch]
    or something similar, or add these commands to your bash startup scripts.

[kch]: http://www.gentoo.org/proj/en/keychain/

  * Finally, make sure your `~/.ssh/config` has the required `host gitolite`
    para (see below for more on this).

Once these sanity checks have passed, things should be fine.  However, if you
still have problems, make sure that the "origin" URL in any clones looks like
`gitolite:reponame.git`, not `git@server:reponame.git`.

### explanation

Here's how it all hangs together.

#### files on the server

  * the authkeys file; this contains one line containing the pubkey of each
    user who is permitted to login without a password.

    Pubkey lines that give shell access look like this:

        ssh-rsa AAAAB3NzaC[snip]uPjrUiAUew== /home/sitaram/.ssh/id_rsa

    On a typical server there will be only one or two of these lines.

    Note that the last bit (`/home/sitaram/.ssh/id_rsa`) is purely a *comment*
    field and can be anything.  Also, the actual lines are much longer, about
    400 characters; I snipped 'em in the middle, as you can see.

    In contrast, pubkey lines that give access to git repos hosted by gitolite
    looks like this:

        command="[some path]src/gl-auth-command sitaram",[some restrictions] ssh-rsa AAAAB3NzaC[snip]s18OnB42oQ== sitaram@sita-lt

    You will have many more of these lines -- one for every pubkey file in
    `keydir/` of your gitolite-admin repo, with the corresponding username in
    place of "sitaram" in the example above.

    The "command=" at the beginning ensures that when someone with the
    corresponding private key logs in, they don't get a shell.  Instead, the
    `gl-auth-command` program is run, and (in this example) is given the
    argument `sitaram`.  This is how gitolite is invoked, (and is told the
    user logging in is "sitaram").

#### files on client

  * default keypair; used to get shell access to servers.  You would have
    copied this pubkey to the gitolite server in order to log in without a
    password.  (On Linux systems you may have used `ssh-copy-id` to do that).
    You would have done this *before* you ran the easy install script, because
    otherwise easy install won't run!

        ~/.ssh/id_rsa
        ~/.ssh/id_rsa.pub

  * gitolite keypair; the "sitaram" in this is the 3rd argument to the
    `src/00-easy-install.sh` command you ran; the easy install script does the
    rest

        ~/.ssh/sitaram
        ~/.ssh/sitaram.pub

  * config file; this file has an entry for gitolite access:

        ~/.ssh/config

    To understand why we need that, let's step back a bit.  Normally, you
    might expect to access gitolite repos like this:

        ssh://git@server/reponame.git

    But this won't work, because this ends up using the *default* keypair
    (normally), which gives you a command line.  Which means it won't invoke
    the `gl-auth-command` program at all, and so none of gitolite's access
    control will work.

    You need to force ssh to use the *other* keypair when performing a git
    operation.  With normal ssh, that would be

        ssh -i ~/.ssh/sitaram git@server

    but git does not support putting an alternate keypair in the URL.

    Luckily, ssh has a very convenient way of capturing all the mundane
    information (username, hostname, port number (if it's not the default 22),
    and keypair to be used) in one "paragraph".  This is what the para looks
    like for us (the easy install script puts it there the first time):

        host gitolite
             user git
             hostname server
             identityfile ~/.ssh/sitaram

    (The "gitolite" can be anything you want of course; it's like a group name
    for all the stuff below it).  This ensures that typing

        ssh gitolite

    is equivalent to

        ssh -i ~/.ssh/sitaram git@server

    and therefore this:

        git clone gitolite:reponame.git

    now works as expected, invoking the special keypair instead of the default
    one.

<a name="twokeys"></a>

#### why two keys on client

Why do I (the admin) need two **different** keypairs?

There are two types of access the admin will make to the server: a normal
login, to get a shell prompt, and gitolite access (clone/fetch/push etc).  The
first access needs an authkeys line *without* any "command=" restrictions,
while the second requires a line *with* such a restriction.

And we can't use the same key for both because there is no way to disambiguate
them; the ssh server will always (*always*) pick the first one in sequence
when the key is offered by the ssh client.

So the next question is usually "I have other ways to get a shell on that
account, so why do I need a key for shell access at all?"

The answer to this is that the "easy install" script, being written for the
most general case, needs shell access via ssh to do its stuff.

If you really, really, want to get rid of the extra key, here's a transcript
that should have enough info to get you going (but it helps to know ssh well):

  * on "sitaram" user, on my workstation

        cd ~/.ssh
        cp id_rsa sitaram
        cp id_rsa.pub sitaram.pub
        cd ~/gitolite-clone
        src/00-easy-install.sh -q git my.git.server sitaram

    that last command produces something like the following:

        you are upgrading from     (unknown)     to v0.80-6-gdde8c4e
        setting up keypair...
            ...reusing /home/sitaram/.ssh/sitaram.pub...
        creating gitolite para in ~/.ssh/config...
        finding/creating gitolite rc...
        installing/upgrading...
        Pseudo-terminal will not be allocated because stdin is not a terminal.
        [master (root-commit) e717a89] start
         2 files changed, 11 insertions(+), 0 deletions(-)
         create mode 100644 conf/gitolite.conf
         create mode 100644 keydir/sitaram.pub
        cloning gitolite-admin repo...
        Initialized empty Git repository in /home/sitaram/gitolite-admin/.git/
        fatal: 'gitolite-admin.git' does not appear to be a git repository
        fatal: The remote end hung up unexpectedly

    notice that the final step (the clone of the newly created gitolite-admin
    repo) failed, as expected

  * now log on to the git hosting account (`git@my.git.server` in this
    example), edit `~/.ssh/authorized_keys`, and delete the line with the
    first occurrence of your key (this should be *before* the `# gitolite
    start` line)

  * now go back to your workstation and

        git clone git@my.git.server:gitolite-admin

That should do it.

### more complex ssh setups

What do you need to know in order to create more complex ssh setups (for
instance if you have *two* gitolite servers you are administering)?

#### two gitolite servers to manage?

  * they can have the same key; no harm there (example, sitaram.pub)

  * instead of just one ssh/config para, you now have two (assuming that the
    remote user on both machines is called "git"):

        host gitolite
             user git
             hostname server
             identityfile ~/.ssh/sitaram

        host gitolite2
             user git
             hostname server2
             identityfile ~/.ssh/sitaram

  * now access one server's repos as `gitolite:reponame.git` and the other
    server's repos as `gitolite2:reponame.git`.

### further reading

While this focused mostly on the client side ssh, you may also want to read
[this][glb] for a much more detailed explanation of the ssh magic on the
server side.

[glb]: http://sitaramc.github.com/0-installing/9-gitolite-basics.html#IMPORTANT_overview_of_ssh